Add a refresh action to the Network detail header that calls
NetworkService.scanWifi(), mirroring the existing button in the Settings
WiFi tab. The button is hidden while WiFi is toggling or a scan is in
progress, and sits left of the connection-type tabs so the tab group
does not shift when switching between Ethernet, WiFi and Cellular.
* feat: add cellular support
* fix(settings): resolve cellular tab index collision
* fix: address review feedback for cellular support
Bump the network API version, drop the deleted term freeze file,
regenerate the settings search index, and reuse existing translation
terms where they already cover the new cellular UI.
* fix: do not assign readonly userPreference when switching network type
Assigning SettingsData.networkPreference through the readonly alias
threw on click, so the Cellular segment in Control Center did nothing.
* fix: make Cellular selectable and the modem row clickable
The Control Center type switcher was bound only to preference, so
Cellular snapped back to Ethernet. The settings modem row highlighted
on hover but had no click handler. Show the modem as a connect target
when no APN profiles exist.
* fix: create a GSM profile when connecting cellular with none saved
Clicking Mobile broadband only activated an existing profile, so a
modem with no APN did nothing useful. Fall back to AddAndActivate
like ethernet connect.
* fix: address second round of cellular review feedback
- Guard cellularDevices map with devMutex via snapshot/by-iface/set/remove
helpers, mirroring the existing ethernet and wifi accessors
- Regenerate mocks with mockery v3 instead of hand-editing mock_Backend.go
- Reuse refreshCellularState() in SetCellularEnabled, DisconnectCellular,
DisconnectCellularDevice, ActivateCellularConnection and device removal
- Wrap retryErr rather than the first error when the auto-config retry fails
- Use Theme.surfaceTextSecondary/primaryHover/primaryHoverLight in the
cellular-off state instead of hand-rolled Qt.rgba values
- Drop the duplicate "No devices found" label so it can no longer render
twice with no modem and no saved config
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* fix: address remaining cellular review comments
- Toast "Failed to toggle cellular" instead of always "enable"
- Remove unused enableCellularRadio() wrappers
- Store Control Center network type as a value, not a list index
* fix: pass nmcli connection selector as separate argument
`nmcli con mod uuid:<UUID>` is not valid syntax -- nmcli expects the
selector keyword as its own argument, so every priority update failed
with "no such connection profile". Because practically every NM profile
has a UUID, this silently disabled autoconnect-priority and route-metric
updates for ethernet and WiFi as well as cellular.
Also fix the Cellular settings status text, which said "Connecting..."
for a flag that only tracks radio enable/disable, and add the seven
cellular terms that were missing from the translation catalogs.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* apply review comments
* fix lints
* update debug doc
* fix style inconsistencies
---------
Co-authored-by: Yechiel Worenklein <[email protected]>
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
Co-authored-by: bbedward <[email protected]>
* feat(theme): add support for matugen smart mode and type
* add another dry run to get smart type preview
* fix too much keywords in search index
* revert dont extract translations
* feat gate "Auto From Wallpaper" toggle row and the available matugen scheme for the pallete drop down
* re-extract settings search index
* make portal sync no longer disables matugen smart mode
* make sure cosmic theme mode also follow change from smart mode
* add translator context for Auto (Light Mode) / Auto (Dark Mode) / Auto From Wallpaper
* fix: gate matugen smart mode checks on the dynamic theme so stock themes keep portal sync and fix tile labels in control center
wallpaper: drop redundant FBOs
startup: create QtMultimedia players lazily on-demand instead of at
startup
launcher: fixed animated images in plugins that use them
dms: set MALLOC_CONF=thp:never,narenas:4,dirty_decay_ms:3000 for
quickshell when unset. jemalloc extets no longer round up to 2 MB
huge pages
Worth keeping an eye on any potential regressions people encounter
* feat(audio): add output port selection
* fix(audio): handle onShowPortSelector in AudioOutputDetail
* i18n: add translator context for all audio port selector strings
* fix(audio): set isLoading = false in the callback of refreshSinkPorts
* chore: remove unused property in AudioPortSelector
* fix(audio): parse availability correctly from `pactl list sinks`
* fix(audio): address output port review feedback
- settings.json/session.json now store only values that differ from
spec defaults
- Machine-specific state moves out of settings.json into session.json
- Add dms backup create/restore: tar.gz of ~/.config/DankMaterialShell
fixes#3027
* Add hotspot contract layer with capability-gated dispatch.
Establish the interface and manager plumbing for hotspot support so backends can opt in without expanding the core Backend contract.
Only backends that implement HotspotBackend get hotspot state propagated; others are forced to unsupported regardless of what they self-report.
* Add IPC handlers and API docs for hotspot actions.
Wire up configure/ start/ stop hotspot through the request router so the QML service layer can drive hotspot operations.
Bump API version to 27 and document the capability-gating contract clients should follow.
* Implement NetworkManager hotspot backend.
Implement HotspotBackend on NetworkManagerBackend with DMS-owned profile management, AP capability detection, and band validation.
Device resolution is deferred to StartHotspot when no device is specified, so profiles survive hardware changes.
* Isolate client Wi-Fi state from AP-mode connections.
Filter AP-mode profiles and access points out of all client Wi-Fi paths so the DMS hotspot (and user-created APs) never appear as saved networks, visible networks, or connected state.
This protects existing client behavior before hotspot controls are exposed in the UI.
* Prefer idle radios for automatic hotspot device selection.
* Add hotspot properties and methods to QML service layer.
Expose hotspot state and actions through DMSNetworkService, NetworkService, and LegacyNetworkService.
Capability is gated on API version and backend-reported support, not backend name checks, and stays stable when Wi-Fi radio is disabled.
* Add hotspot controls to Settings and Control Center.
Settings shows a hotspot setup card as a sibling in the Wi-Fi tab with SSID, password, device, band, save, and start/ stop controls.
Control Center shows a compact row that toggles a configured hotspot or routes to Settings for initial setup.
Both stay visible when Wi-Fi is disabled, explaining the requirement instead of hiding.
* Add translator context to hotspot strings.
* feat(tailscale): add connect/disconnect/exit-node/LAN-access backend
The Tailscale backend previously exposed only read-only status
(tailscale.getStatus, tailscale.refresh). This adds write actions through the
existing tailscale.com/client/local integration:
- tailscale.connect / tailscale.disconnect (EditPrefs WantRunning)
- tailscale.setExitNode (EditPrefs ExitNodeID; empty id clears it and any
legacy ExitNodeIP, mirroring `tailscale set --exit-node`)
- tailscale.setAllowLanAccess (EditPrefs ExitNodeAllowLANAccess)
The manager's client interface gains GetPrefs/EditPrefs; fetchState merges
ExitNodeAllowLANAccess from prefs, and Peer exposes ExitNodeOption so the UI
can list exit-node-capable peers.
* feat(tailscale): expose the new actions in TailscaleService
Adds connectTailscale/disconnectTailscale, setExitNode/clearExitNode and
setAllowLanAccess wrappers, plus derived exitNodeOptions/currentExitNode and the
exitNodeAllowLanAccess state. Write-action errors surface via ToastService.
* feat(tailscale): add connection, exit-node and LAN-access controls to the widget
The control-center widget toggle was a no-op. It now connects/disconnects, and
the detail panel gains a connection status row with a connect/disconnect button,
an exit-node picker and a LAN-access toggle.
* feat(control-center): add widget config overlay with showMountPath toggle for DiskUsage
Introduces WidgetConfigOverlay and DiskUsageWidgetConfigMenu components, allowing
users to toggle mount path visibility per DiskUsage widget in edit mode
* refactor(control-center): use Theme.iconSizeLarge and Theme.fontSizeLarge for small tiles
Standardize SmallDiskUsageButton and SmallBatteryButton sizing with Theme.iconSizeLarge
and Theme.fontSizeLarge, and unify font weight to Font.Bold on both tile widgets.
* fix(control-center): adjust SmallDiskUsageButton font size based on showMountPath
* refactor(control-center): simplify DiskUsage config menu i18n strings
Remove the redundant "Disk Usage Widget" title and the toggle description
to reduce translatable strings
Pulses the WiFi and Bluetooth status icons while a connection is in
progress (lock screen, DankBar control center button, control center
compound pill). The pulse is implemented as a reusable Widgets/DankBlink
component, and the wifi-connecting condition is centralized as
NetworkService.isWifiConnecting.
Co-authored-by: Claude Opus 4.7 (1M context) <[email protected]>
bbedward