* feat: add cellular support
* fix(settings): resolve cellular tab index collision
* fix: address review feedback for cellular support
Bump the network API version, drop the deleted term freeze file,
regenerate the settings search index, and reuse existing translation
terms where they already cover the new cellular UI.
* fix: do not assign readonly userPreference when switching network type
Assigning SettingsData.networkPreference through the readonly alias
threw on click, so the Cellular segment in Control Center did nothing.
* fix: make Cellular selectable and the modem row clickable
The Control Center type switcher was bound only to preference, so
Cellular snapped back to Ethernet. The settings modem row highlighted
on hover but had no click handler. Show the modem as a connect target
when no APN profiles exist.
* fix: create a GSM profile when connecting cellular with none saved
Clicking Mobile broadband only activated an existing profile, so a
modem with no APN did nothing useful. Fall back to AddAndActivate
like ethernet connect.
* fix: address second round of cellular review feedback
- Guard cellularDevices map with devMutex via snapshot/by-iface/set/remove
helpers, mirroring the existing ethernet and wifi accessors
- Regenerate mocks with mockery v3 instead of hand-editing mock_Backend.go
- Reuse refreshCellularState() in SetCellularEnabled, DisconnectCellular,
DisconnectCellularDevice, ActivateCellularConnection and device removal
- Wrap retryErr rather than the first error when the auto-config retry fails
- Use Theme.surfaceTextSecondary/primaryHover/primaryHoverLight in the
cellular-off state instead of hand-rolled Qt.rgba values
- Drop the duplicate "No devices found" label so it can no longer render
twice with no modem and no saved config
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* fix: address remaining cellular review comments
- Toast "Failed to toggle cellular" instead of always "enable"
- Remove unused enableCellularRadio() wrappers
- Store Control Center network type as a value, not a list index
* fix: pass nmcli connection selector as separate argument
`nmcli con mod uuid:<UUID>` is not valid syntax -- nmcli expects the
selector keyword as its own argument, so every priority update failed
with "no such connection profile". Because practically every NM profile
has a UUID, this silently disabled autoconnect-priority and route-metric
updates for ethernet and WiFi as well as cellular.
Also fix the Cellular settings status text, which said "Connecting..."
for a flag that only tracks radio enable/disable, and add the seven
cellular terms that were missing from the translation catalogs.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* apply review comments
* fix lints
* update debug doc
* fix style inconsistencies
---------
Co-authored-by: Yechiel Worenklein <[email protected]>
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
Co-authored-by: bbedward <[email protected]>
wallpaper: drop redundant FBOs
startup: create QtMultimedia players lazily on-demand instead of at
startup
launcher: fixed animated images in plugins that use them
dms: set MALLOC_CONF=thp:never,narenas:4,dirty_decay_ms:3000 for
quickshell when unset. jemalloc extets no longer round up to 2 MB
huge pages
Worth keeping an eye on any potential regressions people encounter
lock-before-suspend released the logind sleep delay inhibitor as soon as Qt
reported the lock rendered (afterAnimating/afterRendering). That signal fires
before the compositor has committed/presented the ext-session-lock surface, so
the machine could freeze ~1 frame later with the desktop still the last
presented frame. On resume the desktop was briefly visible before the lock
appeared (both suspend and hibernate).
Gate lockerReady on WlSessionLock.secure (the ext-session-lock `locked` event),
so the inhibitor is held until the compositor confirms the session is locked and
the desktop is hidden. LockSurface passes the WlSessionLock down as sessionLock;
the readiness check returns early until secure, and re-fires on secureChanged.
The Go-side fallback timer in loginctl monitor remains as the backstop.
Reproduced on niri / s2idle with 3 outputs: debug log showed lockerReady sent
18 ms before `PM: suspend entry`; with this change the desktop no longer flashes
on resume.
Signed-off-by: Thomas Kroll <[email protected]>
Co-authored-by: Claude Opus 4.8 <[email protected]>
this makes use of the existing getFilteredScreens function to allow
users to specify which displays the lockscreen should appear on. prior
to this change, it was "all" or just one.
* feat: parallax-scroll wallpaper
Add a `Scrolling` wallpaper fill mode that translates the wallpaper crop
with the active workspace — like Android home-screen parallax, but along
niri's vertical workspace axis.
The image is scaled to cover the screen on its non-scroll axis, and the
active workspace index drives a fractional offset into the cropped
overflow along the scroll axis. Scroll position is spring-animated
CPU-side and handed to a minimal single-texture shader as a UV offset.
Per-monitor scroll position is published into SessionData so the lock
screen renders the same crop as the active workspace, keeping visual
continuity across lock/unlock.
Two implementation details worth calling out for review:
- QSG_USE_SIMPLE_ANIMATION_DRIVER=1 is exported to the spawned quickshell
process. The default animation driver advances in fixed ~16ms steps,
capping the scroll at 60Hz and desyncing it from compositor motion on
high-refresh displays; the simple driver advances by real elapsed time,
restoring native-refresh pacing. Removing it visibly regresses to 60Hz.
- The wallpaper survives wl_output rebind cycles (e.g. OLED image-cleaning
on DPMS soft-off), which otherwise leave a stuck or void background.
Recovery re-anchors the scroll target on output-lifecycle signals,
rebuilds the ShaderEffect against the current render context, and
re-attaches the wallpaper-layer surface on unlock for parallax-active
monitors — guarded against lock state so the shader gets reliable frame
hints.
* simplify bindings and gate lock screen shader in a loader
---------
Co-authored-by: bbedward <[email protected]>
* feat(wallpaper): support configurable background color
* chore(translations): update settings search index
* revert(wallpaper): keep Pad naming instead of Center
When pam_faillock locks the account (DMS authenticates through the system PAM
stack: /etc/pam.d/login -> system-auth), the lock screen kept showing the
generic "Incorrect password - try again" even though the real cause is a
lockout, so a correct password looks rejected and only a reboot (which clears
the tmpfs /run/faillock tally) appears to help. See #2647.
The previous onMessageChanged only matched the *English* faillock strings
("The account is locked ...") and then wiped that text again on the trailing
pam_unix "Password:" prompt. On a non-English system (e.g. German) the strings
never matched, so the lockout was never surfaced at all.
Detect the notice by position rather than by text: pam emits its informational
messages within an attempt before the password prompt. Collect every non-prompt
info message and, once the prompt arrives, surface the collected lines (minus
the prompt itself) as lockMessage. If the stack short-circuits without ever
prompting (e.g. pam_faillock preauth configured as requisite), the notice is
surfaced on completion instead. This is locale-independent. A per-attempt flag
keeps the message stable across repeated locked attempts and retires it when an
attempt completes without a lockout (faillock reset / unlock_time elapsed).
Fixes#2647
When a custom lock command is configured, Lock.lock() runs the command and
returns early without engaging WlSessionLock, so IdleService.isShellLocked
never transitions true->false. That transition is the only trigger that
dismisses a completed FadeToLockWindow, so the fully-faded black overlay stays
on screen and the desktop is unusable after re-login (regression from b8f4c35,
which added the _completed guard and tied dismissal solely to isShellLocked).
Add a dedicated dismissFadeToLock signal that the custom-lock branch emits
after launching the external locker, mirroring the existing fade signal wiring,
so the overlay is handed off and torn down. The built-in WlSessionLock path is
unchanged and still dismisses on unlock.
Fixes#2595
* fix: ignore keyboard shortcuts of disabled powermenu actions
* fix typo when checking for lock shortcut
* ignore shortcuts for hidden powermenu actions in grid navigation
* ignore keyboard shortcuts of disabled actions in lock power menu
* ignore keyboard shortcuts of disabled actions in lock power menu (list navigation)
- Core user is logged in tty1 while user two is in tty3, you can now seamlessly switch bewteen them
New IPC options:
- `dms ipc call sessions list`
- `dms switch-user [target]`
- New Powermenu switch users option
Pulses the WiFi and Bluetooth status icons while a connection is in
progress (lock screen, DankBar control center button, control center
compound pill). The pulse is implemented as a reusable Widgets/DankBlink
component, and the wifi-connecting condition is centralized as
NetworkService.isWifiConnecting.
Co-authored-by: Claude Opus 4.7 (1M context) <[email protected]>
bbedward