* fix(battery): report when no charge threshold exists instead of faking success
* fix(battery): hide the charge limit controls when there is no battery
Follow-up to the review on #3385: the new explanation showed on
desktops and VMs with no battery at all, where it reads as a fault
report about hardware the machine was never going to have.
Both the explanation and the apply button now require
BatteryService.batteryAvailable. Hiding the button there is the same
point the pull request makes elsewhere: offering a control that cannot
work is what produced the false success in the first place. A machine
without a battery has no charge threshold to write to, so the limit was
never applicable.
BatteryService.batteryAvailable is already the gate used twice in this
file for the same reason.
(cherry picked from commit 6b50696b8a)
* add support for shelly
* fixed terminal failure
* updated to have it not allow adding ignore aur
* updated error strings
* Fixed label
port 1.6
(cherry picked from commit 8fe918ff24)
* updated dank to support aqueous
* further updates
* aqueous support work
* updated to support workspace options better in aqueous
* added blur to dms shell for aqueous
* added keybinding update
* remove unneeded blur
* clean up per claud review
* swapped to ipc
* aqueous: move IPC integration to QML, delete test fixtures (since we
dont have a QML test structure even setup), delete in-repo docs
* fix staticcheck
* aqueous: consolidate more aqueous specific stuff
* add aqueous logo
---------
Co-authored-by: Zoey <[email protected]>
(cherry picked from commit b9365610c8)
* feat(theme): add a selectable source color mode for wallpaper palettes
DMS always seeds the palette from matugen's most dominant candidate
(--source-color-index 0, hardcoded at both call sites). When a large
muted region outvotes a smaller vivid one, a visibly warm wallpaper
produces a cold palette: one image here goes to #8ad0ee where the warm
subject is at hue 46.
Adds a Source Color setting with seven values. Dominant is the default
and is byte-identical to today. Colorful is computed in Go before
matugen runs: quantize the image (Wu for the starting clusters, then a
weighted k-means in Lab), score the result the way caelestia-cli does,
and hand matugen the resulting hex. Its scoring walks a chroma/tone bar
down from 20 until something clears it, which biases the pick toward a
colorful, well-lit color rather than whichever muted color covers the
most pixels. The remaining five map to matugen's --prefer.
- core/internal/matugen/sourcecolor.go: extraction, scoring, and the
one helper both matugen call sites now share
- buildOnce resolves the seed once, before the StockColors branch, so
the dry run and the real run cannot disagree about it
- extraction failure logs a warning and falls through to matugen's own
extraction; it never fails a theme build
- --prefer arrived in matugen 4.1, so it is gated separately from the
existing isV4 check; on 4.0.x those five modes degrade to the
dominant color instead of aborting on an unknown argument
- --source-mode on generate and queue, plus sourceMode on the socket
handler
- Source Color dropdown in Theme & Colors, defaulting to Dominant
Adds github.com/Nadim147c/material/v3 (Apache-2.0, no dependencies) for
HCT conversions, Wu quantization and the dislike analyzer. Its
QuantizeCelebi is not used: it returns after one unconverged iteration
and its Lab.DistanceSquared is a dot product rather than a distance, so
it collapses most of an image into a single cluster.
* fix(theme): address review feedback on source color mode
Two points from review on #3020.
The quantize comment pointed at a FOLLOWUPS file that does not exist in
this repository. Replaced the reference with the measurement it was
standing in for, so the claim is self-contained.
setMatugenSourceMode called Theme.generateSystemThemesFromCurrentTheme()
directly on top of the regenSystemThemes onChange hook that Spec.set
already dispatches. Both feed a 100ms debounce so it was one generation
either way, but the direct call was redundant and is gone.
* fix(theme): keep {{image}} resolvable in colorful mode
Colorful resolves the seed itself and calls matugen with a hex source, which
leaves matugen's {{image}} unset: the builtin pywalfox template and any user
template using the keyword render the literal string "Null".
Pass the wallpaper path alongside dank16 in --import-json-string, as suggested
in review, so those templates keep working unedited. The path is made absolute
to match what matugen renders for {{image}} in the other modes.
* fix(theme): cut translator terms on the source color dropdown
Per-mode descriptions were seven of the fifteen new terms this branch adds,
and five of them differed by a single adjective. Drop them: the dropdown row
already describes what the setting does, and the docs cover each mode.
The battery popout already surfaces the UPower energy rate, but the bar
widget could only show percentage and remaining time, so telling how fast
the battery is charging or draining meant opening the popout (or running a
third-party plugin that polls /sys/class/power_supply).
Add two independent, opt-in toggles to the battery widget - "Show Charge
Rate" and "Show Discharge Rate" - that render the signed rate next to the
existing text, e.g. "+28W" while charging and "77% (2h 11m) -19W" while
draining. Both default to off, and follow the established pattern: a global
default in SettingsData plus a per-widget-instance override.
The value comes from BatteryService.changeRate, so there is no extra process
or polling. It hides itself when the rate is below 0.05W (idle, fully
charged, or sitting at a charge limit) so it costs no bar space unless it
has something to say. Precision adapts to keep the pill narrow: one decimal
below 10W, whole watts above; vertical bars get a whole-watt line.
* fix(dock): hide overlay dock over fullscreen
* fix(dock): track fullscreen state declaratively
* fix(dock): clear overlay mask during fullscreen
* feat(dock): add fullscreen visibility option
* fix(dock): preserve auto-hide fullscreen behavior
* fix(dock): keep fullscreen mask interactive in overview
* fix(frame): host dock on overview without show dock
* feat: add cellular support
* fix(settings): resolve cellular tab index collision
* fix: address review feedback for cellular support
Bump the network API version, drop the deleted term freeze file,
regenerate the settings search index, and reuse existing translation
terms where they already cover the new cellular UI.
* fix: do not assign readonly userPreference when switching network type
Assigning SettingsData.networkPreference through the readonly alias
threw on click, so the Cellular segment in Control Center did nothing.
* fix: make Cellular selectable and the modem row clickable
The Control Center type switcher was bound only to preference, so
Cellular snapped back to Ethernet. The settings modem row highlighted
on hover but had no click handler. Show the modem as a connect target
when no APN profiles exist.
* fix: create a GSM profile when connecting cellular with none saved
Clicking Mobile broadband only activated an existing profile, so a
modem with no APN did nothing useful. Fall back to AddAndActivate
like ethernet connect.
* fix: address second round of cellular review feedback
- Guard cellularDevices map with devMutex via snapshot/by-iface/set/remove
helpers, mirroring the existing ethernet and wifi accessors
- Regenerate mocks with mockery v3 instead of hand-editing mock_Backend.go
- Reuse refreshCellularState() in SetCellularEnabled, DisconnectCellular,
DisconnectCellularDevice, ActivateCellularConnection and device removal
- Wrap retryErr rather than the first error when the auto-config retry fails
- Use Theme.surfaceTextSecondary/primaryHover/primaryHoverLight in the
cellular-off state instead of hand-rolled Qt.rgba values
- Drop the duplicate "No devices found" label so it can no longer render
twice with no modem and no saved config
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* fix: address remaining cellular review comments
- Toast "Failed to toggle cellular" instead of always "enable"
- Remove unused enableCellularRadio() wrappers
- Store Control Center network type as a value, not a list index
* fix: pass nmcli connection selector as separate argument
`nmcli con mod uuid:<UUID>` is not valid syntax -- nmcli expects the
selector keyword as its own argument, so every priority update failed
with "no such connection profile". Because practically every NM profile
has a UUID, this silently disabled autoconnect-priority and route-metric
updates for ethernet and WiFi as well as cellular.
Also fix the Cellular settings status text, which said "Connecting..."
for a flag that only tracks radio enable/disable, and add the seven
cellular terms that were missing from the translation catalogs.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* apply review comments
* fix lints
* update debug doc
* fix style inconsistencies
---------
Co-authored-by: Yechiel Worenklein <[email protected]>
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
Co-authored-by: bbedward <[email protected]>
* feat(theme): add support for matugen smart mode and type
* add another dry run to get smart type preview
* fix too much keywords in search index
* revert dont extract translations
* feat gate "Auto From Wallpaper" toggle row and the available matugen scheme for the pallete drop down
* re-extract settings search index
* make portal sync no longer disables matugen smart mode
* make sure cosmic theme mode also follow change from smart mode
* add translator context for Auto (Light Mode) / Auto (Dark Mode) / Auto From Wallpaper
* fix: gate matugen smart mode checks on the dynamic theme so stock themes keep portal sync and fix tile labels in control center
Adds a user-configurable spacing between system tray icons in the bar,
available per widget via the tray context menu in Settings > Widgets
("Icon Spacing" stepper, 0-20px), with a global default fallback.
- SettingsData/SettingsSpec: new trayIconSpacing setting (default 0)
- SystemTrayBar: apply configuredIconSpacing to the horizontal Row and
vertical Column layouts, and account for it in auto-overflow item
estimation and drag-and-drop slot math (shift offsets and target
index calculation)
- WidgetsTabSection: "Icon Spacing" stepper in the tray widget context
menu, following the existing "Max Visible" pattern
- WidgetsTab: keep trayIconSpacing when restoring per-widget data
bbedward