The K70 RGB PRO V2 (1B1C:1BB3) was detected but never lit: it blanked
into software render mode and then fell back to its onboard effect.
Getting it working turned up five faults, three of which affect every
Corsair V2 device rather than just this keyboard.
Packet size is now read from the HID report descriptor before the first
write instead of being inferred from a reply. These devices come in a 64
byte and a 1024 byte flavour, and sending a short packet to a 1024 byte
endpoint stalls it until the device is power cycled, so the size has to
be known up front rather than after two short queries have gone out.
CORSAIR_V2_PACKET_SIZE was 1024 while pkt_sze reached 1025, so every
read using pkt_sze overran its stack buffer by a byte. The command
helpers now use pkt_sze against buffers of the corrected size.
The lighting resource probe ran before the device was placed in software
render mode, where the answer is meaningless, and treated any error as
"use resource 1". Devices that answer invalid or unsupported for
resource 1 want the alternate lighting resource, which takes RGB
triplets; this keyboard is one of them. The probe now runs after the
render mode switch and distinguishes a stale open handle from an
unsupported resource.
Direct lighting writes were sized from the keymap, which covers only the
keys that exist. The hardware expects its full slot count and ignores a
short write, so corsair_v2_device carries an optional hw_led_count and
the buffer map is padded to it. Set to 193 for this keyboard.
The keepalive thread wrote LEDs on its first pass, because
last_update_time was left at the clock epoch and so always read as older
than the update period. That raced detection on the same HID handle with
no locking, which both corrupted the transaction and could abort the
process. The clock is now started before the thread runs, device
transactions are serialised behind a mutex, and the thread is stopped
before Shutdown rather than after.
Also fixes an uninitialised stack buffer sent to the device during
setup, and widens the K70 RGB PRO matrix to 22 columns so the numpad
period key has a position in the layout instead of being dropped.
Verified on hardware: repeated colour changes apply and the device stays
responsive across runs.
Co-Authored-By: Claude Opus 5 <[email protected]>
* Reorganize and clean up RGBController API functions
* Add functions to get protected RGBController member values
* Make NetworkClient, ProfileManager, and ResourceManager friend classes so they can access protected members
* Protected previously-public RGBController members
* Information strings (name, vendor, description, version, serial location)
* Device type
* Active mode
* Flags
* LEDs vector
* LED alternate names vector
* Modes vector
* Colors vector
* Zones vector
* Add CONTROLLER_FLAG_HIDDEN to allow plugins to hide controllers from control GUI
* Add update reason codes to RGBController update callback and signal updates on more RGBController events
* Add loop zone types and segmented zone type
* Add matrix map field to segments
* Rework matrix_map_type from using pointers to vector to prevent memory leaks
* Rework KeyboardLayoutManager to return new matrix_map_type
* Add access mutex to RGBController API
* Add per-zone modes ot RGBController API
* Add JSON description functions to RGBController API
* Adding key layout and metadata to CorsairPeripheralV2Devices.cpp
* Adding lighting control endpoint check
* Adding new detector
* Small style fixes
* Resolves#3260
* Reworked wireless Corsair Slipstream detection to be generic for all devices
* Adding key layout and metadata to CorsairPeripheralV2Devices.cpp
* Adding new detector
* Added config to CorsairPeripheralV2Devices
* Adding device config to CorsairPeripheralV2Devices.cpp
* Extending the base CorsairPeripheralV2Controller to CorsairPeripheralV2HWController to account for HW modes
* Minor adjustments to the CorsairPeripheralV2SWController to accommodate
* Resolves#1951
+ Adding CorsairPeripheralV2Controller base class
+ Adding CorsairPeripheralV2Devices.h metadata file
+ Renaming CorsairK55RGBPROController to CorsairPeripheralV2SWController
+ Adjusting CorsairPeripheralV2SWController to accomodate base class changes
+ Renaming RGBController_CorsairK55RGBPRO to RGBController_CorsairV2SW
+ Adjusting RGBController_CorsairV2SW to handle device set up from meta data
+ Adding PID `0x1B9B` and registering detector in CorsairPeripheralV2ControllerDetect.cpp
SalastilandClaude Opus 5