The per-output temperature override was reachable from the Display Config
slider and from `wayland.icc.setTemp` over IPC, but not from the CLI.
- `dms icc set-temp <output> <kelvin>` (alias `setTemp`) sets a per-output
override, 1000-10000K, and 0 clears it so the output follows the night
light schedule again. Range checking matches the daemon so an invalid
value fails in the CLI instead of over IPC.
- `dms icc status` gains a Temp column (the override in K, or `schedule`),
so an override can be verified without opening the settings UI.
Verified against a running daemon: `dms icc status` reports 7000K for the
three overridden outputs and `schedule` for the remaining one.
Rebuild of #3388 on current master: the previous branch was cut from an
older base and reverted unrelated fixes in the gamma stack and the display
settings UI.
ICC profiles:
- core/internal/icc: ICC v2/v4 parser (TRC, LUT8/16 and parametric curves,
vcgt, description/version/color space) plus gamma ramp generation, with
synthetic coverage and optional vendor-profile tests (ICC_TEST_DIR).
- wayland manager: load iccProfiles from the compositor's DMS config dir,
build the ramp from the profile when one is set (falling back to the
temperature ramp when it is missing or unparsable), and re-apply on
output hotplug and after resume.
- ICC ramps apply while the night light schedule is disabled; outputs
without a profile keep an identity ramp.
- desc/mluc offsets are validated before slicing, so a malformed profile
returns an error instead of panicking the daemon.
Per-output temperature:
- outputTemps in the same config; SetOutputTemp accepts 1000-10000K and the
Display Config slider exposes 3000-10000K, which matters for displays
calibrated at a higher white point (e.g. a 7000K profile).
Gamma control lifecycle:
- needsControls() now keeps the controls alive for configured ICC profiles
and per-output temperatures, so toggling the night light off no longer
destroys the controls and drops the ramps.
- Re-apply paths clear the per-output dedup state instead of adding a
manager-level guard, which would have suppressed contrast-only writes and
the post-resume forced resend (#1235), and left a recreated control
without a ramp.
- Monitor sleep/disconnect still re-establishes controls when an output
comes back.
IPC / CLI / UI:
- wayland.icc.{getStatus,apply,remove,listOutputs,setTemp,getTemps}
- dms icc list | info <file> | apply <output> <file> | remove <output> | status
- Display Config output card gains a Color Profile row (browse/apply/remove
with description, version, color space and active state) and a per-output
color temperature slider, backed by Services/ICCService.qml.
Config path:
- DMSConfigDir() follows the compositor layout (niri/dms, hypr/dms,
mango/dms) via the shared compositor detection and utils.XDGConfigHome(),
replacing the hardcoded niri path in both the manager and `dms icc`.
Tests: TZ=UTC go test ./... (60 packages ok), including red/green coverage
for the icc parser bounds checks and needsControls().
* fix(battery): report when no charge threshold exists instead of faking success
* fix(battery): hide the charge limit controls when there is no battery
Follow-up to the review on #3385: the new explanation showed on
desktops and VMs with no battery at all, where it reads as a fault
report about hardware the machine was never going to have.
Both the explanation and the apply button now require
BatteryService.batteryAvailable. Hiding the button there is the same
point the pull request makes elsewhere: offering a control that cannot
work is what produced the false success in the first place. A machine
without a battery has no charge threshold to write to, so the limit was
never applicable.
BatteryService.batteryAvailable is already the gate used twice in this
file for the same reason.
* fix(clipboard): preserve pinned state when editing entries
* fix(clipboard): address PR review feedback on editEntry
* fix(clipboard): validate empty text and entry size in EditEntry
* fix(clipboard): gate saving entry on full text load completion
* fix(clipboard): add user feedback and error fallback for entry loading
* fix(clipboard): keep entry and gate save with error toast on load failure
* fix(clipboard): reject non-text edits and add translator contexts
* fix(clipboard): support alt text mime types in EditEntry and UI guards
* fix(clipboard): pre-fetch entry before opening editor and allow retry on load failure
* Island: Added option to choose the control center icon to be either
Battery gauge or Connectivity
* Add Control Center to settings search index
* island: keep connectivity dim opacity off the blink target
DankBlink animates opacity and forces it back to 1.0 when it stops,
which broke the icon's binding and left the disabled state fully opaque.
Adds Fortinet gateway support to the NetworkManager openconnect path.
A SAML gateway authenticates through the browser, with the loopback
redirect handled in core and the session traded for the cookie
openconnect needs. Certificate trust is confirmed once and stored as
the digest openfortivpn uses.
openfortivpn config files can be imported as profiles. A saml-login
line selects the browser login, anything else imports as a password
profile carrying whatever credentials the file had.
Co-authored-by: Claude Opus 5 <[email protected]>
When a backend runs the upgrade in a terminal (paru/yay or a custom
command), the popout unconditionally reopened itself once the terminal
closed. Add an updaterReopenAfterUpgrade setting (default: on, keeping
current behavior) so users can opt out and keep the popout closed after
the terminal exits.
* idle inhibitor: add duration presets and timed expiry
Right-click the bar widget or expand the Control Center pill to keep the
system awake for a set duration rather than only indefinitely. The deadline
is persisted so it survives a shell restart, and is re-checked on resume
because timers stop across suspend.
Adds `dms ipc call inhibit enableFor <minutes>`, and `inhibit status` now
reports the remaining time.
* idle inhibitor: add translator context to new duration strings
* refactor(systemtray): convert overflow menu and context menu to DankPopout
* fix(systemtray): correct window-local anchor position mapping and enable contentHandlesKeys for tray menu keyboard navigation
* fix(systemtray): force active focus on tray menu content
* fix(systemtray): address inline PR review feedback
- Force active focus on open for key navigation
- Unregister menu only if matching active instance
- Map anchor trigger position relative to screen origin
* fix(systemtray): gate onMenuOpenChanged on useOverflowPopup
- Prevent registering overflowPopout in inline expansion mode
* fix(systemtray): correct context menu positioning in overflow popout
- Handle screen global coordinate mapping for both connected and standalone popout modes
* fix(systemtray): handle per-screen backend and vertical bar anchor Y offset
- Use overflowPopout.useConnectedBackend for per-screen discriminator
- Add vertical anchor Y centering offset in showForTrayItem
* fix(systemtray): center overflow popout on vertical bar caret
- Add vertical orientation anchor Y offset in _openOverflowAt
* fix(systemtray): clear submenu entryStack on tray menu open
- Expose entryStack alias on trayMenuContentRoot
- Clear entryStack on trayMenuPopout onOpened to avoid submenu state leakage
The cycle fallback fired from a never-cycled state. With one display
enabled and another marked off in settings, a DPMS standby that drops
the DisplayPort link looked like an unplug, and DMS sent an On to the
disabled display over niri IPC. It stayed on until the next config
reload and the workspaces round tripped through it.
Track each output's enabled state the first time a cycle touches it,
drop the entry once it is back at that state, and only rescue outputs
that were on before the cycle disabled them. Outputs that were already
off are never enabled automatically.
* updated dank to support aqueous
* further updates
* aqueous support work
* updated to support workspace options better in aqueous
* added blur to dms shell for aqueous
* added keybinding update
* remove unneeded blur
* clean up per claud review
* swapped to ipc
* aqueous: move IPC integration to QML, delete test fixtures (since we
dont have a QML test structure even setup), delete in-repo docs
* fix staticcheck
* aqueous: consolidate more aqueous specific stuff
* add aqueous logo
---------
Co-authored-by: Zoey <[email protected]>
* feat(screenshot): add touch and stylus input support for region capture
* fix(screenshot): guard against finishSelection on touch up during scroll phase
port 1.6
KIDult2226