Update German and Norwegian translations for 1.0 final
This commit is contained in:
RedBlackAka
+39
-41
@@ -59,7 +59,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DMXSettingsEntry/DMXSettingsEntry.ui" line="32"/>
|
||||
<source>Brightness Channel:</source>
|
||||
<translation>Helligkeits Kanal:</translation>
|
||||
<translation>Helligkeitskanal:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DMXSettingsEntry/DMXSettingsEntry.ui" line="42"/>
|
||||
@@ -160,12 +160,12 @@
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="48"/>
|
||||
<source><h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p></source>
|
||||
<translation><h2>Warnung:</h2><p>Eine oder mehrere I2C/SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p>Je nachdem, welche Schnittstellen nicht initialisiert wurden, können einige RGB-DRAM-Module, einige RGB-Beleuchtung auf der Hauptplatine und RGB-Grafikkarten in OpenRGB nicht verfügbar sein.</p><p>Unter Windows ist dies in der Regel auf einen Fehler beim Laden des PawnIO-Treibers zurückzuführen.</p><p>Um OpenRGB auf diese Geräte zugreifen zu lassen, müssen Sie PawnIO von <a href='https://pawnio.eu/'>https://pawnio.eu</a> installieren und OpenRGB als Administrator oder als Systemdienst ausführen.</p><p>Wenn Sie keines der oben genannten Geräte verwenden, können Sie diese Meldung sicher ignorieren.</p></translation>
|
||||
<translation><h2>Warnung:</h2><p>Eine oder mehrere I2C/SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p>Abhänging davon, welche Schnittstellen nicht initialisiert wurden, können einige RGB-DRAM-Module, RGB-Beleuchtung auf der Hauptplatine und RGB-Grafikkarten in OpenRGB nicht verfügbar sein.</p><p>Unter Windows ist dies in der Regel auf einen Fehler beim Laden des PawnIO-Treibers zurückzuführen.</p><p>Um OpenRGB auf diese Geräte zugreifen zu lassen, müssen Sie PawnIO von <a href='https://pawnio.eu/'>https://pawnio.eu</a> installieren und OpenRGB als Administrator oder als Systemdienst ausführen.</p><p>Wenn Sie keines der oben genannten Geräte verwenden, können Sie diese Meldung sicher ignorieren.</p></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="55"/>
|
||||
<source><h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p></source>
|
||||
<translation><h2>Warnung:</h2><p>Eine oder mehrere I2C/SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p>Je nachdem, welche Schnittstellen nicht initialisiert wurden, können einige RGB-DRAM-Module, einige RGB-Beleuchtungseinheiten auf der Hauptplatine und RGB-Grafikkarten in OpenRGB nicht verfügbar sein.</p><p>Unter Linux liegt dies in der Regel daran, dass das Modul i2c-dev nicht geladen ist.</p><p>Um diese Geräte mit OpenRGB zugreifen zu können, müssen Sie das Modul i2c-dev sowie das richtige I2C-Treibermodul für Ihre Hauptplatine laden. Dies ist in der Regel i2c-piix4 für AMD-Systeme und i2c-i801 für Intel-Systeme.</p><p>Wenn Sie keines der oben genannten Geräte verwenden, können Sie diese Meldung sicher ignorieren.</p></translation>
|
||||
<translation><h2>Warnung:</h2><p>Eine oder mehrere I2C/SMBus-Schnittstellen konnten nicht initialisiert werden.</p><p>Abhänging davon, welche Schnittstellen nicht initialisiert wurden, können einige RGB-DRAM-Module, RGB-Beleuchtungseinheiten auf der Hauptplatine und RGB-Grafikkarten in OpenRGB nicht verfügbar sein.</p><p>Unter Linux liegt dies in der Regel daran, dass das Modul i2c-dev nicht geladen ist.</p><p>Um diese Geräte mit OpenRGB zugreifen zu können, müssen Sie das Modul i2c-dev sowie das richtige I2C-Treibermodul für Ihre Hauptplatine laden. Dies ist in der Regel i2c-piix4 für AMD-Systeme und i2c-i801 für Intel-Systeme.</p><p>Wenn Sie keines der oben genannten Geräte verwenden, können Sie diese Meldung sicher ignorieren.</p></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="64"/>
|
||||
@@ -175,7 +175,7 @@
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="70"/>
|
||||
<source><h2>Warning:</h2><p>Multiple OpenRGB udev rules are installed.</p><p>The udev rules file 60-openrgb.rules is installed in both /etc/udev/rules.d and /usr/lib/udev/rules.d.</p><p>Multiple udev rules files can conflict, it is recommended to remove one of them.</p></source>
|
||||
<translation><h2>Warnung:</h2><p>Mehrere OpenRGB udev-Regeldateien sind installiert.</p><p>Die udev-Regeldatei 60-openrgb.rules ist in beiden /etc/udev/rules.d und /usr/lib/udev/rules.d installiert.</p><p>Mehrere udev-Regeldateien können sich gegenseitig beeinflussen. Es wird empfohlen, eine von ihnen zu entfernen.</p></translation>
|
||||
<translation><h2>Warnung:</h2><p>Mehrere OpenRGB udev-Regeldateien sind installiert.</p><p>Die udev-Regeldatei 60-openrgb.rules ist in /etc/udev/rules.d und /usr/lib/udev/rules.d installiert.</p><p>Mehrere udev-Regeldateien können sich gegenseitig beeinflussen. Es wird empfohlen, eine von ihnen zu entfernen.</p></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -221,17 +221,17 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="72"/>
|
||||
<source>Universe Size:</source>
|
||||
<translation>Univerumsgröße:</translation>
|
||||
<translation>Universe Größe:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="79"/>
|
||||
<source>Number of LEDs:</source>
|
||||
<translation>LED Anzahl:</translation>
|
||||
<translation>LED-Anzahl:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="92"/>
|
||||
<source>Start Universe:</source>
|
||||
<translation>Anfangsuniversum:</translation>
|
||||
<translation>Starte Universe:</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -324,7 +324,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DDPSettingsEntry/DDPSettingsEntry.cpp" line="98"/>
|
||||
<source>DDP (Distributed Display Protocol)</source>
|
||||
<translation>DDP (verteiltes Anzeigeprotokoll)</translation>
|
||||
<translation>DDP (Distributed Display Protocol)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DebugSettingsEntry/DebugSettingsEntry.cpp" line="143"/>
|
||||
@@ -373,7 +373,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/ManualDevicesSettingsPage.ui" line="66"/>
|
||||
<source>Save without Rescan</source>
|
||||
<translation>Speichern ohne Neuerfassen</translation>
|
||||
<translation>Speichern ohne erneute scannung</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -811,7 +811,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDevicePage/OpenRGBDevicePage.cpp" line="1667"/>
|
||||
<source>Saving Not Supported</source>
|
||||
<translation>Speichern wird nicht unterstützt</translation>
|
||||
<translation>Speichern nicht unterstützt</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDevicePage/OpenRGBDevicePage.cpp" line="1727"/>
|
||||
@@ -899,7 +899,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.ui" line="203"/>
|
||||
<source>Save Profile with custom name</source>
|
||||
<translation>Profil mit eigenem Namen speichern</translation>
|
||||
<translation>Profil mit benutzerdefinierten Namen speichern</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="342"/>
|
||||
@@ -917,7 +917,7 @@
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="350"/>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="559"/>
|
||||
<source>Quick Colors</source>
|
||||
<translation>Schnelle Farben</translation>
|
||||
<translation>Schnelle Farbenauswahl</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="352"/>
|
||||
@@ -997,7 +997,7 @@
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="737"/>
|
||||
<source>General Settings</source>
|
||||
<translatorcomment>Using "Allg." as shorthand for "Allgemeine". "Allgemeine" would be too long for the UI. So until text size is handled differently this should do it.</translatorcomment>
|
||||
<translation>Allg. Einstellungen</translation>
|
||||
<translation>Allgemeine Einstellungen</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="917"/>
|
||||
@@ -1071,7 +1071,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBLogConsolePage/OpenRGBLogConsolePage.ui" line="39"/>
|
||||
<source>Log Level:</source>
|
||||
<translation>Log Level</translation>
|
||||
<translation>Log Level:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBLogConsolePage/OpenRGBLogConsolePage.ui" line="32"/>
|
||||
@@ -1099,9 +1099,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBMatrixMapEditorDialog/OpenRGBMatrixMapEditorDialog.ui" line="72"/>
|
||||
<source>Width:</source>
|
||||
<translation>
|
||||
|
||||
Breite:</translation>
|
||||
<translation>Breite:</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -1193,7 +1191,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBPluginsPage/OpenRGBPluginsPage.cpp" line="224"/>
|
||||
<source>Restart Needed</source>
|
||||
<translation>Programmneustart Erforderlich</translation>
|
||||
<translation>Neustart Erforderlich</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBPluginsPage/OpenRGBPluginsPage.cpp" line="224"/>
|
||||
@@ -1231,7 +1229,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBProfileEditorDialog/OpenRGBProfileEditorDialog.ui" line="72"/>
|
||||
<source>Device States</source>
|
||||
<translation>Gerätezustände</translation>
|
||||
<translation>Gerätzustände</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBProfileEditorDialog/OpenRGBProfileEditorDialog.ui" line="78"/>
|
||||
@@ -1363,7 +1361,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBServerInfoPage/OpenRGBServerInfoPage.cpp" line="65"/>
|
||||
<source>Stopping...</source>
|
||||
<translation>Beenden...</translation>
|
||||
<translation>Beendet...</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBServerInfoPage/OpenRGBServerInfoPage.cpp" line="73"/>
|
||||
@@ -1694,7 +1692,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneInitializationDialog/OpenRGBZoneInitializationDialog.ui" line="39"/>
|
||||
<source><html><head/><body><p>One or more manually configurable zones have not been configured. Manually configurable zones are most commonly used for addressable RGB headers where the number of LEDs in the connected device(s) cannot be detected automatically.</p><p>Please enter the number of LEDs in each zone below.</p><p>For more information about calcuating the correct size, please check <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">this link.</span></a></p></body></html></source>
|
||||
<translation><html><head/><body><p>Eine oder mehrere manuell konfigurierbare Zonen wurden nicht konfiguriert. Manuell konfigurierbare Zonen werden am häufigsten für adressierbare RGB-Header verwendet, bei denen die Anzahl der LEDs in den angeschlossenen Geräten nicht automatisch erkannt werden kann.</p><p>Bitte geben Sie die Anzahl der LEDs in jeder Zone unten ein.</p><p>Weitere Informationen zur Berechnung der richtigen Größe finden Sie <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">hier.</span></a></p></body></html></translation>
|
||||
<translation><html><head/><body><p>Eine oder mehrere manuell konfigurierbare Zonen wurden nicht konfiguriert. Manuell konfigurierbare Zonen werden normalerweise für adressierbare RGB-Header verwendet, bei denen die Anzahl der LEDs in den angeschlossenen Geräten nicht automatisch erkannt werden kann.</p><p>Bitte gebe die Anzahl der LEDs in jeder Zone unten ein.</p><p>Weitere Informationen zur Berechnung der richtigen Größe finden Sie <a href="https://openrgb.org/resize.html"><span style=" text-decoration: underline; color:#0000ff;">hier.</span></a></p></body></html></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneInitializationDialog/OpenRGBZoneInitializationDialog.ui" line="49"/>
|
||||
@@ -1795,7 +1793,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsWizSettingsEntry/PhilipsWizSettingsEntry.ui" line="59"/>
|
||||
<source>White Strategy:</source>
|
||||
<translation>Weiß Strategie:</translation>
|
||||
<translation>Weiß-Strategie:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsWizSettingsEntry/PhilipsWizSettingsEntry.cpp" line="19"/>
|
||||
@@ -1897,7 +1895,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="238"/>
|
||||
<source>Load Window Geometry</source>
|
||||
<translation>Fenster Geometrie laden</translation>
|
||||
<translation>Fenstergeometrie laden</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="230"/>
|
||||
@@ -1907,12 +1905,12 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="226"/>
|
||||
<source>Disable Key Expansion</source>
|
||||
<translation>Deaktiviere Schlüsselerweiterung in der Geräteansicht</translation>
|
||||
<translation>Deaktiviere Key-Erweiterung in der Geräteansicht</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="217"/>
|
||||
<source>Show LED View by Default</source>
|
||||
<translation>LED anzeige standardmäßig zeigen</translation>
|
||||
<translation>LED Anzeige standardmäßig zeigen</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="163"/>
|
||||
@@ -1952,7 +1950,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="195"/>
|
||||
<source>Monochrome Tray Icon</source>
|
||||
<translation>Graues Icon</translation>
|
||||
<translation>Monochromes Tray Icon</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="178"/>
|
||||
@@ -1972,7 +1970,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="201"/>
|
||||
<source>Initial Detection Delay (ms)</source>
|
||||
<translation>Anfangserkennungsverzögerung (ms)</translation>
|
||||
<translation>Initiale Erkennungsverzögerung (ms)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="203"/>
|
||||
@@ -1987,27 +1985,27 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="215"/>
|
||||
<source>Enable Log File</source>
|
||||
<translation>Log Datei aktivieren</translation>
|
||||
<translation>Logdatei aktivieren</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="219"/>
|
||||
<source>Log Level</source>
|
||||
<translation>Protokollierungsstufe</translation>
|
||||
<translation>Log Level</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="237"/>
|
||||
<source>Log File Count Limit</source>
|
||||
<translation>Logdateien Anzahl Limit</translation>
|
||||
<translation>Logdatei-Anzahl-Limit</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="239"/>
|
||||
<source>Maximum number of log files to keep, 0 for no limit</source>
|
||||
<translation>Maximale Anzahl der zu behaltenden Protokolldateien, 0 für keine Begrenzung</translation>
|
||||
<translation>Maximale Anzahl der zu behaltenden Logdateien, 0 für keine Begrenzung</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="243"/>
|
||||
<source>Log Manager</source>
|
||||
<translation>Protokoll-Manager</translation>
|
||||
<translation>Log-Manager</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="250"/>
|
||||
@@ -2037,7 +2035,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="266"/>
|
||||
<source>Workaround for some older SDK implementations that sent incorrect packet size for certain packets</source>
|
||||
<translation>Umgehungsmethode für einige ältere SDK-Implementierungen, die falsche Paketgrößen für bestimmte Pakete gesendet haben</translation>
|
||||
<translation>Workaround für einige ältere SDK-Implementierungen, die falsche Paketgrößen für bestimmte Pakete gesendet haben</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="268"/>
|
||||
@@ -2062,22 +2060,22 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="207"/>
|
||||
<source>Compact Tabs</source>
|
||||
<translation>Kompakte Registerkarten</translation>
|
||||
<translation>Kompakte Tabs</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="209"/>
|
||||
<source>Display sidebar tabs as icons only</source>
|
||||
<translation>Seitenleisten-Registerkarten nur als Icons anzeigen</translation>
|
||||
<translation>Seitenleisten-Tabs nur als Icons anzeigen</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="212"/>
|
||||
<source>Tabs on Top</source>
|
||||
<translation>Registerkarten oben</translation>
|
||||
<translation>Tabs oben</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="214"/>
|
||||
<source>Display tabs on top instead of on the left</source>
|
||||
<translation>Registerkarten oben anstelle von links anzeigen</translation>
|
||||
<translation>Tabs oben anstelle von Links anzeigen</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="221"/>
|
||||
@@ -2097,7 +2095,7 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="242"/>
|
||||
<source>Save on Exit</source>
|
||||
<translation>Geometrie beim Schließen beibehalten</translation>
|
||||
<translation>Beim Schließen speichern</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="244"/>
|
||||
@@ -2147,17 +2145,17 @@ Breite:</translation>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="284"/>
|
||||
<source>AMD SMBus: Reduce CPU Usage (restart required)</source>
|
||||
<translation>AMD SMBus: CPU-Auslastung reduzieren (Programmneustart erfoderlich)</translation>
|
||||
<translation>AMD SMBus: CPU-Auslastung reduzieren (Neustart erfoderlich)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="173"/>
|
||||
<source>Custom Arguments</source>
|
||||
<translation>Eigene Argumente</translation>
|
||||
<translation>Benutzerdefinierte Argumente</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="272"/>
|
||||
<source>Shared SMBus Access (restart required)</source>
|
||||
<translation>Gemeinsamer SMBus-Zugriff (Programmneustart erforderlich)</translation>
|
||||
<translation>Gemeinsamer SMBus-Zugriff (Neustart erforderlich)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="185"/>
|
||||
|
||||
+70
-70
@@ -6,7 +6,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DDPSettingsEntry/DDPSettingsEntry.ui" line="26"/>
|
||||
<source>DDP Device</source>
|
||||
<translation>DDP-enhet</translation>
|
||||
<translation>DDP-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DDPSettingsEntry/DDPSettingsEntry.ui" line="32"/>
|
||||
@@ -41,7 +41,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DDPSettingsEntry/DDPSettingsEntry.ui" line="100"/>
|
||||
<source>Keepalive Time (ms):</source>
|
||||
<translation>Holdvakttid (ms):</translation>
|
||||
<translation>Levetid (ms):</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DDPSettingsEntry/DDPSettingsEntry.ui" line="116"/>
|
||||
@@ -54,7 +54,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DMXSettingsEntry/DMXSettingsEntry.ui" line="26"/>
|
||||
<source>DMX Device</source>
|
||||
<translation>DMX-enhet</translation>
|
||||
<translation>DMX-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DMXSettingsEntry/DMXSettingsEntry.ui" line="32"/>
|
||||
@@ -84,7 +84,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DMXSettingsEntry/DMXSettingsEntry.ui" line="82"/>
|
||||
<source>Keepalive Time:</source>
|
||||
<translation>Keepalive Time:</translation>
|
||||
<translation>Levetid:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DMXSettingsEntry/DMXSettingsEntry.ui" line="92"/>
|
||||
@@ -117,7 +117,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DebugSettingsEntry/DebugSettingsEntry.ui" line="49"/>
|
||||
<source>Zones</source>
|
||||
<translation>Zoner</translation>
|
||||
<translation>Soner</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DebugSettingsEntry/DebugSettingsEntry.ui" line="55"/>
|
||||
@@ -137,7 +137,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DebugSettingsEntry/DebugSettingsEntry.ui" line="76"/>
|
||||
<source>Resizable</source>
|
||||
<translation>Størrelsesendrbar</translation>
|
||||
<translation>Størrelsesredigerbar</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DebugSettingsEntry/DebugSettingsEntry.ui" line="83"/>
|
||||
@@ -160,17 +160,17 @@
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="48"/>
|
||||
<source><h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Windows, this is usually caused by a failure to load the PawnIO driver.</p><p>For OpenRGB to access these devices, you must install PawnIO from <a href='https://pawnio.eu/'>https://pawnio.eu</a> and run OpenRGB as administrator or as a system service.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p></source>
|
||||
<translation><h2>Advarsel:</h2><p>Én eller flere I2C/SMBus-flater feilet under oppstart.</p><p>Avhengig av hvilke flater som feilet under oppstart, kan visse RGB DRAM-moduler, visse RGB-belysning på hovedkort og RGB-grafikkort ikke være tilgjengelige i OpenRGB.</p><p>På Windows er dette vanligvis forårsaket av en feil ved lasting av PawnIO-drevet.</p><p>For at OpenRGB skal kunne få tilgang til disse enhetene, må du installere PawnIO fra <a href='https://pawnio.eu/'>https://pawnio.eu</a> og kjøre OpenRGB som administrator eller som systemtjeneste.</p><p>Hvis du ikke bruker noen av enhetene som er nevnt ovenfor, kan du trygt ignorere denne meldingen.</p></translation>
|
||||
<translation><h2>Advarsel:</h2><p>Ett eller flere I2C/SMBus-grensesnitt har feilet å initalisere.</p><p>Avhengig av hvilke grensesnitt som feilet å initalisere, kan noen RGB DRAM-moduler, RGB-belysning på hovedkort og RGB-grafikkort ikke være tilgjengelige i OpenRGB.</p><p>På Windows er dette vanligvis grunnet en feil ved lasting av PawnIO-driveren.</p><p>For at OpenRGB skal kunne få tilgang til disse enhetene, må du installere PawnIO fra <a href='https://pawnio.eu/'>https://pawnio.eu</a> og kjøre OpenRGB som administrator eller som systemtjeneste.</p><p>Hvis du ikke bruker noen av enhetene som er nevnt ovenfor, kan du trygt ignorere denne meldingen.</p></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="55"/>
|
||||
<source><h2>Warning:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>Depending on which interfaces failed to initialize, some RGB DRAM modules, some motherboards' onboard RGB lighting, and RGB graphics cards may not be available in OpenRGB.</p><p>On Linux, this is usually because the i2c-dev module is not loaded.</p><p>For OpenRGB to access these devices, you must load the i2c-dev module along with the correct I2C driver module for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>If you are not using any of the devices listed above, you can safely ignore this message.</p></source>
|
||||
<translation><h2>Advarsel:</h2><p>Én eller flere I2C/SMBus-interfaces har ikke klart å initialisere.</p><p>Avhengig av hvilke grensesnitt som ikke klarte å initialisere, kan noen RGB DRAM-moduler, noen RGB-belysning på hovedkortet og RGB-grafikkort være utilgjengelige i OpenRGB.</p><p>På Linux er dette vanligvis fordi modulen i2c-dev ikke er lastet.</p><p>For at OpenRGB skal kunne tilgå disse enhetene, må du laste modulen i2c-dev sammen med den riktige I2C-drevmodulen for hovedkortet ditt. Dette er vanligvis i2c-piix4 for AMD-systemer og i2c-i801 for Intel-systemer.</p><p>Hvis du ikke bruker noen av enhetene som er nevnt ovenfor, kan du trygt ignorere denne meldingen.</p></translation>
|
||||
<translation><h2>Advarsel:</h2><p>Ett eller flere I2C/SMBus-grensesnitt har feilet å initialisere.</p><p>Avhengig av hvilke grensesnitt som feilet å initialisere, kan noen RGB DRAM-moduler, RGB-belysning på hovedkortet og RGB-grafikkort ikke være tilgjengelige i OpenRGB.</p><p>På Linux er dette vanligvis fordi modulen i2c-dev ikke er lastet.</p><p>For at OpenRGB skal kunne tilgå disse enhetene, må du laste modulen i2c-dev sammen med den riktige I2C-drivermodulen for hovedkortet ditt. Dette er vanligvis i2c-piix4 for AMD-systemer og i2c-i801 for Intel-systemer.</p><p>Hvis du ikke bruker noen av enhetene som er nevnt ovenfor, kan du trygt ignorere denne meldingen.</p></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="64"/>
|
||||
<source><h2>Warning:</h2><p>The OpenRGB udev rules are not installed.</p><p>Most devices will not be available unless running OpenRGB as as a system service or as root.</p><p>If using AppImage, Flatpak, or self-compiled versions of OpenRGB you must install the udev rules manually</p><p>See <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> to install the udev rules manually</p></source>
|
||||
<translation><h2>Advarsel:</h2><p>OpenRGBs udev-regler er ikke installert.</p><p>De fleste enheter vil ikke være tilgjengelige med mindre du kjører OpenRGB som systemtjeneste eller som rotbruker.</p><p>Hvis du bruker AppImage, Flatpak eller selvbygde versjoner av OpenRGB, må du installere udev-reglene manuelt.</p><p>Se <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> for å installere udev-reglene manuelt.</p></translation>
|
||||
<translation><h2>Advarsel:</h2><p>OpenRGBs udev-regler er ikke installert.</p><p>De fleste enhetene vil ikke være tilgjengelige med mindre du kjører OpenRGB som systemtjeneste eller som rotbruker.</p><p>Hvis du bruker AppImage, Flatpak eller selvbygde versjoner av OpenRGB, må du installere udev-reglene manuelt.</p><p>Se <a href='https://openrgb.org/udev'>https://openrgb.org/udev</a> for å installere udev-reglene manuelt.</p></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../DetectionManager.cpp" line="70"/>
|
||||
@@ -196,12 +196,12 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="26"/>
|
||||
<source>E1.31 Device</source>
|
||||
<translation>E1.31-enhet</translation>
|
||||
<translation>E1.31-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="32"/>
|
||||
<source>Keepalive Time:</source>
|
||||
<translation>Keepalive Time:</translation>
|
||||
<translation>Levetid:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="39"/>
|
||||
@@ -221,7 +221,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="72"/>
|
||||
<source>Universe Size:</source>
|
||||
<translation>Univers størrelse:</translation>
|
||||
<translation>Universe Størrelse:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="79"/>
|
||||
@@ -231,7 +231,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.ui" line="92"/>
|
||||
<source>Start Universe:</source>
|
||||
<translation>Start univers:</translation>
|
||||
<translation>Start Universe:</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -265,7 +265,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/GoveeSettingsEntry/GoveeSettingsEntry.ui" line="26"/>
|
||||
<source>Govee Device</source>
|
||||
<translation>Govee-enhet</translation>
|
||||
<translation>Govee-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/GoveeSettingsEntry/GoveeSettingsEntry.ui" line="32"/>
|
||||
@@ -278,7 +278,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/KasaSmartSettingsEntry/KasaSmartSettingsEntry.ui" line="26"/>
|
||||
<source>Kasa Smart Device</source>
|
||||
<translation>Kasa Smart-enhet</translation>
|
||||
<translation>Kasa Smart-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/KasaSmartSettingsEntry/KasaSmartSettingsEntry.ui" line="35"/>
|
||||
@@ -296,12 +296,12 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/LIFXSettingsEntry/LIFXSettingsEntry.ui" line="26"/>
|
||||
<source>LIFX Device</source>
|
||||
<translation>LIFX-enhet</translation>
|
||||
<translation>LIFX-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/LIFXSettingsEntry/LIFXSettingsEntry.ui" line="35"/>
|
||||
<source>Multizone</source>
|
||||
<translation>Multizon</translation>
|
||||
<translation>Multisone</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/LIFXSettingsEntry/LIFXSettingsEntry.ui" line="42"/>
|
||||
@@ -316,7 +316,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/LIFXSettingsEntry/LIFXSettingsEntry.ui" line="62"/>
|
||||
<source>Extended Multizone</source>
|
||||
<translation>Utvidet multizon</translation>
|
||||
<translation>Utvidet multisone</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -324,12 +324,12 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DDPSettingsEntry/DDPSettingsEntry.cpp" line="98"/>
|
||||
<source>DDP (Distributed Display Protocol)</source>
|
||||
<translation>DDP (fordelt visningsprotokoll)</translation>
|
||||
<translation>DDP (Distributed Display Protocol)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/DebugSettingsEntry/DebugSettingsEntry.cpp" line="143"/>
|
||||
<source>Debug Device</source>
|
||||
<translation>Feilsøk enhet</translation>
|
||||
<translation>Feilsøkingsenhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/E131SettingsEntry/E131SettingsEntry.cpp" line="116"/>
|
||||
@@ -349,7 +349,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/SerialSettingsEntry/SerialSettingsEntry.cpp" line="163"/>
|
||||
<source>Serial Device</source>
|
||||
<translation>Seriell enhet</translation>
|
||||
<translation>Seriell Enhet</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -368,7 +368,7 @@
|
||||
<location filename="../ManualDevicesSettingsPage/ManualDevicesSettingsPage.ui" line="49"/>
|
||||
<location filename="../ManualDevicesSettingsPage/ManualDevicesSettingsPage.ui" line="61"/>
|
||||
<source>Save and Rescan</source>
|
||||
<translation>Lagre og skann igjen</translation>
|
||||
<translation>Lagre og skann på nytt</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/ManualDevicesSettingsPage.ui" line="66"/>
|
||||
@@ -399,7 +399,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/NanoleafSettingsEntry/NanoleafScanDialog.ui" line="20"/>
|
||||
<source>To pair, hold the on-off button down for 5-7 seconds until the LED starts flashing in a pattern, a new entry should appear in the list below, then click the "Pair" button on the entry within 30 seconds.</source>
|
||||
<translation>For å parre, hold på på/av-knappen i 5-7 sekunder til LED-en begynner å blinke i et mønster. En ny oppføring bør vises i listen under, deretter klikk på "Parre"-knappen for oppføringen innen 30 sekunder.</translation>
|
||||
<translation>For å pare, hold på på/av-knappen i 5-7 sekunder til LED-en begynner å blinke i et mønster. En ny oppføring bør vises i listen under, deretter klikk på "Parre"-knappen på oppføringen innen 30 sekunder.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/NanoleafSettingsEntry/NanoleafScanDialog.ui" line="42"/>
|
||||
@@ -422,7 +422,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/NanoleafSettingsEntry/NanoleafSettingsEntry.ui" line="26"/>
|
||||
<source>Nanoleaf Device</source>
|
||||
<translation>Nanoleaf-enhet</translation>
|
||||
<translation>Nanoleaf-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/NanoleafSettingsEntry/NanoleafSettingsEntry.ui" line="32"/>
|
||||
@@ -437,7 +437,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/NanoleafSettingsEntry/NanoleafSettingsEntry.ui" line="60"/>
|
||||
<source>Auth Key:</source>
|
||||
<translation>Auth Key:</translation>
|
||||
<translation>Auth Nøkkel:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/NanoleafSettingsEntry/NanoleafSettingsEntry.ui" line="74"/>
|
||||
@@ -1612,7 +1612,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="14"/>
|
||||
<source>Zone Editor</source>
|
||||
<translation>Zoneredigerer</translation>
|
||||
<translation>Soneredigerer</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="20"/>
|
||||
@@ -1647,37 +1647,37 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="99"/>
|
||||
<source>Reset Zone Configuration</source>
|
||||
<translation>Nullstill konfigurasjon for område</translation>
|
||||
<translation>Nullstill konfigurasjon for soner</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="124"/>
|
||||
<source>Device-Specific Zone Configuration</source>
|
||||
<translation>Enhetspesifikk zonkonfigurasjon</translation>
|
||||
<translation>Enhetspesifikk sonekonfigurasjon</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="151"/>
|
||||
<source>Zone Configuration</source>
|
||||
<translation>Zonkonfigurasjon</translation>
|
||||
<translation>Sonekonfigurasjon</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="159"/>
|
||||
<source>Zone Type:</source>
|
||||
<translation>Zonetype:</translation>
|
||||
<translation>Sonetype:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="176"/>
|
||||
<source>Zone Matrix Map:</source>
|
||||
<translation>Zonematrisekart:</translation>
|
||||
<translation>Sonematrisekart:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="185"/>
|
||||
<source>Zone Name:</source>
|
||||
<translation>Zonenummer:</translation>
|
||||
<translation>Sonenummer:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneEditorDialog/OpenRGBZoneEditorDialog.ui" line="192"/>
|
||||
<source>Zone Size:</source>
|
||||
<translation>Størrelse på zone:</translation>
|
||||
<translation>Størrelse på sone:</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -1686,7 +1686,7 @@
|
||||
<location filename="../OpenRGBZoneInitializationDialog/OpenRGBZoneInitializationDialog.ui" line="14"/>
|
||||
<location filename="../OpenRGBZoneInitializationDialog/OpenRGBZoneInitializationDialog.cpp" line="81"/>
|
||||
<source>Zone Initialization</source>
|
||||
<translation>Zonestart</translation>
|
||||
<translation>Sonestart</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBZoneInitializationDialog/OpenRGBZoneInitializationDialog.ui" line="39"/>
|
||||
@@ -1739,7 +1739,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsHueSettingsEntry/PhilipsHueSettingsEntry.ui" line="46"/>
|
||||
<source>Auto Connect Group:</source>
|
||||
<translation>Auto connect gruppe:</translation>
|
||||
<translation>Auto-connect-gruppe:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsHueSettingsEntry/PhilipsHueSettingsEntry.ui" line="60"/>
|
||||
@@ -1749,7 +1749,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsHueSettingsEntry/PhilipsHueSettingsEntry.ui" line="74"/>
|
||||
<source>Client Key:</source>
|
||||
<translation>Klient nøkkel:</translation>
|
||||
<translation>Klientnøkkel:</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsHueSettingsEntry/PhilipsHueSettingsEntry.ui" line="81"/>
|
||||
@@ -1772,7 +1772,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsWizSettingsEntry/PhilipsWizSettingsEntry.ui" line="26"/>
|
||||
<source>Philips Wiz Device</source>
|
||||
<translation>Philips Wiz-enhet</translation>
|
||||
<translation>Philips Wiz-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/PhilipsWizSettingsEntry/PhilipsWizSettingsEntry.ui" line="32"/>
|
||||
@@ -1810,7 +1810,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/QMKORGBSettingsEntry/QMKORGBSettingsEntry.ui" line="26"/>
|
||||
<source>QMK OpenRGB Device</source>
|
||||
<translation>QMK OpenRGB-enhet</translation>
|
||||
<translation>QMK OpenRGB-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/QMKORGBSettingsEntry/QMKORGBSettingsEntry.ui" line="38"/>
|
||||
@@ -1833,7 +1833,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/QMKVialRGBSettingsEntry/QMKVialRGBSettingsEntry.ui" line="26"/>
|
||||
<source>QMK VialRGB Device</source>
|
||||
<translation>QMK VialRGB-enhet</translation>
|
||||
<translation>QMK VialRGB-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/QMKVialRGBSettingsEntry/QMKVialRGBSettingsEntry.ui" line="38"/>
|
||||
@@ -1904,7 +1904,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="226"/>
|
||||
<source>Disable Key Expansion</source>
|
||||
<translation>Deaktiver nøkkelutvidelse i enhetsvisning</translation>
|
||||
<translation>Deaktiver Key-utvidelse i enhetsvisning</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="217"/>
|
||||
@@ -1929,7 +1929,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="170"/>
|
||||
<source>Start minimized to the system tray</source>
|
||||
<translation>Start minimeret til systemtrayen</translation>
|
||||
<translation>Start minimeret til systemtrayet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="175"/>
|
||||
@@ -1944,12 +1944,12 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="191"/>
|
||||
<source>Keep OpenRGB active in the system tray when closing the main window</source>
|
||||
<translation>Hold OpenRGB aktiv i systemtrayen når hovedvinduet lukkes</translation>
|
||||
<translation>Hold OpenRGB aktiv i systemtrayet når hovedvinduet lukkes</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="195"/>
|
||||
<source>Monochrome Tray Icon</source>
|
||||
<translation>Grått icon</translation>
|
||||
<translation>Monokromt tray icon</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="178"/>
|
||||
@@ -1959,7 +1959,7 @@
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="197"/>
|
||||
<source>HID Safe Mode</source>
|
||||
<translation>HID trygge modus</translation>
|
||||
<translation>HID tryggmodus</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="199"/>
|
||||
@@ -1974,7 +1974,7 @@
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="203"/>
|
||||
<source>Amount of time, in milliseconds, to wait before detecting devices when started</source>
|
||||
<translation>Antall millisekunder som skal vente før enheter oppdages når programmet startes</translation>
|
||||
<translation>Antall millisekunder som skal ventes før enheter oppdages når programmet startes</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="205"/>
|
||||
@@ -1994,17 +1994,17 @@
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="237"/>
|
||||
<source>Log File Count Limit</source>
|
||||
<translation>Antall loggfiler grense</translation>
|
||||
<translation>Loggfil antallsgrense</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="239"/>
|
||||
<source>Maximum number of log files to keep, 0 for no limit</source>
|
||||
<translation>Maksimal antall loggfiler som skal beholdes, 0 for ubegrenset</translation>
|
||||
<translation>Maksimalt antall loggfiler som skal beholdes, 0 for ubegrenset</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="243"/>
|
||||
<source>Log Manager</source>
|
||||
<translation>Loggadministrator</translation>
|
||||
<translation>Loggmanager</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="250"/>
|
||||
@@ -2029,7 +2029,7 @@
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="264"/>
|
||||
<source>Legacy Workaround</source>
|
||||
<translation>Tilbakeholdelse for eldre systemer</translation>
|
||||
<translation>Workaround for eldre systemer</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="266"/>
|
||||
@@ -2049,7 +2049,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="196"/>
|
||||
<source>Use a monochrome icon in the system tray instead of a full color icon</source>
|
||||
<translation>Bruk en monokrom ikon i systemlåsen istedenfor et fargelagt ikon</translation>
|
||||
<translation>Bruk et monokromt ikon i systemtrayet istedenfor et farget ikon</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="202"/>
|
||||
@@ -2059,7 +2059,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="207"/>
|
||||
<source>Compact Tabs</source>
|
||||
<translation>Kompakte faneinnhold</translation>
|
||||
<translation>Kompakte faner</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="209"/>
|
||||
@@ -2069,12 +2069,12 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="212"/>
|
||||
<source>Tabs on Top</source>
|
||||
<translation>Fanebånd på toppen</translation>
|
||||
<translation>Faner på toppen</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="214"/>
|
||||
<source>Display tabs on top instead of on the left</source>
|
||||
<translation>Vis faneinnholdet øverst istedenfor på venstre side</translation>
|
||||
<translation>Vis faner øverst istedenfor på venstre side</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="221"/>
|
||||
@@ -2089,7 +2089,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="234"/>
|
||||
<source>Window Geometry</source>
|
||||
<translation>Vindu geometri</translation>
|
||||
<translation>Vindugeometri</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="242"/>
|
||||
@@ -2099,7 +2099,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="244"/>
|
||||
<source>Save window geometry on exit</source>
|
||||
<translation>Lagre vinduets geometri ved avslutt</translation>
|
||||
<translation>Lagre vindugeometri ved avslutting</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="247"/>
|
||||
@@ -2124,17 +2124,17 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="263"/>
|
||||
<source>User Interface</source>
|
||||
<translation>Bruker grensesnitt</translation>
|
||||
<translation>Brukergrensesnitt</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="275"/>
|
||||
<source>SMBus Sleep Mode (restart required)</source>
|
||||
<translation>SMBus-søvnmodus (omstart kreves)</translation>
|
||||
<translation>SMBus-Søvnmodus (omstart kreves)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="288"/>
|
||||
<source>Drivers</source>
|
||||
<translation>Journaler</translation>
|
||||
<translation>Drivere</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ResourceManager.cpp" line="212"/>
|
||||
@@ -2144,12 +2144,12 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="284"/>
|
||||
<source>AMD SMBus: Reduce CPU Usage (restart required)</source>
|
||||
<translation>AMD SMBus: reduser CPU bruk (omstart kreves)</translation>
|
||||
<translation>AMD SMBus: Reduser CPU bruk (omstart kreves)</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="173"/>
|
||||
<source>Custom Arguments</source>
|
||||
<translation>Eigene Argumente</translation>
|
||||
<translation>Egene Argumenter</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="272"/>
|
||||
@@ -2164,7 +2164,7 @@
|
||||
<message>
|
||||
<location filename="../OpenRGBDialog/OpenRGBDialog.cpp" line="200"/>
|
||||
<source>Hex Format</source>
|
||||
<translation>Hex format</translation>
|
||||
<translation>Hex Format</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../OpenRGBDynamicSettingsWidget/OpenRGBDynamicSettingsWidget.cpp" line="357"/>
|
||||
@@ -2174,7 +2174,7 @@
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="51"/>
|
||||
<source>Load Profile on Exit</source>
|
||||
<translation>Last ned profil ved avslutt</translation>
|
||||
<translation>Last profil ved avslutting</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="53"/>
|
||||
@@ -2184,7 +2184,7 @@
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="55"/>
|
||||
<source>Load Profile on Open</source>
|
||||
<translation>Last inn profil ved åpning</translation>
|
||||
<translation>Last profil ved åpning</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="57"/>
|
||||
@@ -2194,7 +2194,7 @@
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="59"/>
|
||||
<source>Load Profile on Resume</source>
|
||||
<translation>Last ned profil ved gjenoppretting</translation>
|
||||
<translation>Last profil ved våkning</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="61"/>
|
||||
@@ -2204,17 +2204,17 @@
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="63"/>
|
||||
<source>Load Profile on Service Shutdown</source>
|
||||
<translation>Last ned profil ved tjenestestopp</translation>
|
||||
<translation>Last profil ved tjenestestopp</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="65"/>
|
||||
<source>Profile to load when the OpenRGB background service shuts down</source>
|
||||
<translation>Profil som skal lastes når OpenRGB bakgrunns-tjenesten slutter</translation>
|
||||
<translation>Profil som skal lastes når OpenRGB bakgrunnstjenesten slutter</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="67"/>
|
||||
<source>Load Profile on Service Startup</source>
|
||||
<translation>Last ned profil ved tjenestestart</translation>
|
||||
<translation>Last profil ved tjenestestart</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="69"/>
|
||||
@@ -2224,7 +2224,7 @@
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="71"/>
|
||||
<source>Load Profile on Suspend</source>
|
||||
<translation>Last ned profil ved å sette på pause</translation>
|
||||
<translation>Last profil ved suspendering</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="73"/>
|
||||
@@ -2234,7 +2234,7 @@
|
||||
<message>
|
||||
<location filename="../../ProfileManager.cpp" line="75"/>
|
||||
<source>Profile Manager</source>
|
||||
<translation>Profilhåndterer</translation>
|
||||
<translation>Profilmanager</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -2250,7 +2250,7 @@
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/YeelightSettingsEntry/YeelightSettingsEntry.ui" line="26"/>
|
||||
<source>Yeelight Device</source>
|
||||
<translation>Yeelight-enhet</translation>
|
||||
<translation>Yeelight-Enhet</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="../ManualDevicesSettingsPage/YeelightSettingsEntry/YeelightSettingsEntry.ui" line="39"/>
|
||||
|
||||
Reference in New Issue
Block a user