Compare commits

...
Author SHA1 Message Date
Adam Honse 13414ec9b8 OpenRGB version 0.2 2020-05-12 16:33:41 -05:00
Adam Honse 74faee0f73 Reorder Thermaltake Riing modes to put direct at top 2020-05-12 16:04:52 -05:00
Adam Honse 3f0027aa90 Use byte index 2 of config table for channel count on addressable Aura controllers 2020-05-12 15:58:00 -05:00
Adam Honse d22aa1ed6c Only allow ASRock firmwares 1.x, 2.x, and 3.x for now 2020-05-12 15:11:11 -05:00
Adam Honse 23d51f65d0 Only update mode for zones with nonzero size 2020-05-12 15:02:02 -05:00
Adam Honse cad356efca Remove hard coded list of Polychrome firmware versions as it seems all firmwares 1.x and 2.x use ASR LED protocol and 3.x+ use Polychrome 2020-05-12 14:46:11 -05:00
Adam Honse 70e83c13cc Attempt to auto detect unknown Polychrome firmware versions 2020-05-12 13:39:14 -05:00
Martin Hartl 7ca0a1b6ab Add Aura USB controller for X570 mainboards 2020-05-12 12:25:02 -05:00
Adam Honse 9bd5536d07 Add ASR LED firmware 1.5 2020-05-12 12:06:34 -05:00
Adam Honse eaa3b9a368 Add command line option to enable i2c tools 2020-05-12 11:01:46 -05:00
Adam Honse 599c468de8 Small changes for 0.2 - report 5 channels from Aura Addressable controller until config table is figured out, increase sleep in Corsair Peripheral write to 2ms to prevent device crashing in Linux 2020-05-12 08:59:19 -05:00
Adam Honse 9f21814395 Code style changes for RGB Fusion 2 SMBus 2020-05-11 12:24:25 -05:00
Adam Honse cb8a551683 Disable RGB Fusion 2 SMBus controller until better detection scheme is implemented 2020-05-11 11:43:42 -05:00
Matt Harper 7f1156d81c Rename UpdateLEDs to DeviceUpdateLEDs 2020-05-11 11:40:34 -05:00
Matt Harper 5beee08166 Write only the absolutely necessary LEDs 2020-05-11 11:40:34 -05:00
Matt Harper 1334129078 Additional protocol options 2020-05-11 11:40:34 -05:00
Matt Harper 216b492f24 Const cleanup, fix behavioral bugs by writing all LEDs every time 2020-05-11 11:40:34 -05:00
Matt Harper 1b65bb9cc3 Rudimentary RGB Fusion 2 SMBus support 2020-05-11 11:40:34 -05:00
Adam Honse 0f4ddd164f RGB Fusion 2 SMBus initial work 2020-05-11 11:40:33 -05:00
Adam Honse e6aadc414b Handle socket errors on Windows, which does not return 0 when a socket is disconnected like Linux does 2020-05-10 16:22:29 -05:00
Adam Honse 883a78ad9d Fix client on Windows 2020-05-10 16:16:59 -05:00
Adam Honse 15d23d3009 Add client status update callback to NetworkClient 2020-05-10 13:41:01 -05:00
Adam Honse e2c2b8c1df Client will now close listener thread when disconnected and attempt to reconnect. Initialization behavior (controller requests, client string update) are performed automatically upon reconnection 2020-05-10 01:19:38 -05:00
Adam Honse 5133c30242 Update BlackWidow V2 device string 2020-05-09 18:21:46 -05:00
Matt Harper 69e1e19bf9 Bugfix - properly free ServerClients 2020-05-09 17:30:54 -05:00
Adam Honse 46f08f7423 Disable SMBus tools again 2020-05-09 15:49:47 -05:00
Adam Honse 352b9928ca Add file headers to network files and some minor code cleanup 2020-05-09 15:48:16 -05:00
Adam Honse 87854d5781 Fix crash when stopping server 2020-05-09 15:48:16 -05:00
Adam Honse 1b3f8f9eb4 Clean up server page 2020-05-09 15:48:16 -05:00
Adam Honse 6438c15dd3 Fix build on Windows 2020-05-09 15:48:16 -05:00
Adam Honse dbe29991f0 Send client string after server is connected 2020-05-09 15:48:15 -05:00
Adam Honse a5e9a3de05 Add mutex on updating callbacks 2020-05-09 15:48:15 -05:00
Adam Honse edf1b251c0 Send and receive client string 2020-05-09 15:48:15 -05:00
Adam Honse 9ff4314840 Add callback to NetworkServer to handle UI updates when client information changes 2020-05-09 15:48:15 -05:00
Adam Honse 3ad0986ae7 Add IP field to client information and display client IP in the server tab's connected client list 2020-05-09 15:48:15 -05:00
Adam Honse 6bfc9dd9db Create a structure to hold client information in the network server and fix i2c hanging on destructor when bus is not available. 2020-05-09 15:48:15 -05:00
Adam Honse 9b8a0d465e Functions to set IP and port and start client 2020-05-09 15:48:15 -05:00
Adam Honse 119741b736 Fix build on Windows 2020-05-09 15:48:15 -05:00
Adam Honse 2fe958783c Use select on accept call as well so that server closes on Linux 2020-05-09 15:48:15 -05:00
Adam Honse 1c59ef6b80 Fix build on Linux 2020-05-09 15:48:15 -05:00
Adam Honse 9e44e4ba4f Add server information to user interface and provide buttons to start and stop server, change port 2020-05-09 15:48:15 -05:00
Adam Honse b8e14ea067 Server info WIP 2020-05-09 15:48:14 -05:00
Adam Honse 525071c205 Use condition variables and mutexes to eliminate sleeps from SMBus threading 2020-05-09 15:48:14 -05:00
Adam Honse bfe03b0564 Handle all SMBus controller activity on a separate thread to avoid corrupting the SMBus data 2020-05-09 15:48:14 -05:00
Adam Honse 04b87ce2eb Use std::thread for NetworkClient threads 2020-05-09 15:48:14 -05:00
Adam Honse 81acc47cd6 Use std::thread for NetworkServer threads 2020-05-09 15:48:14 -05:00
Adam Honse 6e426b1403 Fix thread conflicts for HyperX keyboard in Direct mode 2020-05-09 15:48:14 -05:00
Adam Honse 6509e53a9b Disable I2C devices until threading issues are resolved, don't start a NetworkClient in main 2020-05-09 15:48:14 -05:00
Adam Honse 5b42b3d11d Use TCP_NODELAY on client socket 2020-05-09 15:48:14 -05:00
Adam Honse 8bd515296d Add key matrix map for Corsair K70 keyboards 2020-05-09 15:48:14 -05:00
Adam Honse 2bbf66c0ee Fix memory leaks in client 2020-05-09 15:48:14 -05:00
Adam Honse d716973642 Get network client working on Windows 2020-05-09 15:48:14 -05:00
Adam Honse 25f7a87a79 Get network server working in Windows 2020-05-09 15:48:14 -05:00
Adam Honse 0619a16be2 Add matrix map for HyperX Alloy Elite 2020-05-09 15:48:13 -05:00
Adam Honse 4a3802f344 Add matrix map for Poseidon Z RGB keyboard 2020-05-09 15:48:13 -05:00
Adam Honse 105f5642ef Add matrix map support 2020-05-09 15:48:13 -05:00
Adam Honse 54ab57cea6 Add zone types to HyperX and Poseidon Z RGB keyboard controllers 2020-05-09 15:48:13 -05:00
Adam Honse e3e6c0347e Add a thread to RGBController to asynchronously perform device updates. Only implemented for UpdateLEDs for now 2020-05-09 15:48:13 -05:00
Adam Honse 4d6706ce61 Close server listener thread when read returns zero (client connection lost) 2020-05-09 15:48:13 -05:00
Adam Honse 39c5aff864 Send color data over the network when calling color update functions 2020-05-09 15:48:13 -05:00
Adam Honse 450f438538 Send mode data block when updating mode 2020-05-09 15:48:13 -05:00
Adam Honse 0270c745ce Implement RGBController_Network packet sending for current set of RGBController commands 2020-05-09 15:48:13 -05:00
Adam Honse e2dfcd5b0f Client now requests list of all controllers from server and adds them to the master list 2020-05-09 15:48:13 -05:00
Adam Honse 68fa3c2def Create functions for sending replies 2020-05-09 15:48:13 -05:00
Adam Honse cde7469191 Create functions for sending requests 2020-05-09 15:48:13 -05:00
Adam Honse 7c1a1396ca Client requests controller count and first controller data block from server, prints response 2020-05-09 15:48:13 -05:00
Adam Honse 7f052f21aa Run client from main 2020-05-09 15:48:12 -05:00
Adam Honse dff667751b Start work on network client 2020-05-09 15:48:12 -05:00
Adam Honse 2625807c1a Add RGBController function call packet functionality 2020-05-09 15:48:12 -05:00
Adam Honse 7af283fdbf Implement requests for number of controllers and controller information block 2020-05-09 15:48:12 -05:00
Adam Honse c7ffe3b926 Network server can now receive packets properly 2020-05-09 15:48:12 -05:00
Adam Honse 46339c5f86 More work on network support, need to implement spawning of one read thread for each client socket 2020-05-09 15:48:12 -05:00
Adam Honse cf69598fd1 Start working on server request processing code 2020-05-09 15:48:12 -05:00
Adam Honse 594f66ab23 Initial network files 2020-05-09 15:48:12 -05:00
Adam Honse 01e0808e41 Add 1ms sleep after every Corsair peripheral USB message because K70 RGB locks up on Linux otherwise 2020-05-04 17:02:39 -05:00
Adam Honse 2dc443ff1e Add 0x18A3 to Aura addressable PID list (Z390-F) 2020-05-01 15:28:49 -05:00
Adam Honse 0ab0586dfa Update OpenRazer-Win32 DLLs to openrazer commit 134d7bf 2020-05-01 13:41:42 -05:00
Adam Honse 88fa6bf25a Hide SMBus tools panel, will add a settings option to show it 2020-04-29 16:36:37 -05:00
Adam Honse 9346490e4a Fix memory leak in OpenRazer controller 2020-04-28 20:08:43 -05:00
Adam Honse 7d4e5d6122 Add Redragon M715 support 2020-04-28 17:07:59 -05:00
Adam Honse d4a03b23c8 Add Redragon K550 support 2020-04-28 16:55:39 -05:00
Adam Honse 47b5c94310 Add WinUSB/Zadig info to README 2020-04-23 19:32:57 -05:00
Adam Honse 079a984f8d Add some information to the README and update the formatting a bit 2020-04-23 19:24:27 -05:00
Adam Honse b6e35c4155 Add Mamba 2012 and fix Mamba (wireless Chroma version) device string 2020-04-21 20:02:32 -05:00
Adam Honse c9d1ac5d8f Update OpenRazerWindows to support DeathAdder Chroma command format 2020-04-21 19:40:09 -05:00
Adam Honse 427c635ed8 Update to OpenRazer-Win32 API, device attribute pointers are now filled in by the driver during device probe, so we don't need to fill them in manually by device type anymore 2020-04-21 16:22:39 -05:00
Chris 0703bcd0a8 Several improvements to the controller
Corrected syntax errors
Corrected logical errors
Readability improvements
Build no longer segfaults changing zone
2020-04-21 15:51:54 -05:00
Adam Honse 984c6bb7f5 Fix naming convention 2020-04-21 15:27:46 -05:00
Adam Honse d27095dacd Fix duplicate strings in OpenRazer device list 2020-04-21 15:26:22 -05:00
Chris 9228b5c4cd Added missing RGB devices found in upstream Openrazer
Sections sorted alphabetically

Added Razer Keyboards
    anansi_device
    cynosa_chroma_device
    blackwidow_2019_device
    blackwidow_chroma_v2_device
    blackwidow_chroma_overwatch_device
    blackwidow_elite_device
    blackwidow_x_chroma_device
    huntsman_device
    huntsman_te_device

Added Razer Mice
    abyssus_elite_dva_edition_device
    abyssus_essential_device
    basilisk_device
    lancehead_te_device
    mamba_chroma_wired_device
    mamba_chroma_wireless_device
    mamba_wireless_wired_device
    naga_hex_v2_device
    naga_trintiy_device
    viper_ultimate_device

Added Mousepad
    firefly_device_hyperflux
    goliathus_device
2020-04-21 00:38:55 -05:00
Chris 7fe87703e5 Initial addition for the CoolerMaster MP750 Controller 2020-04-19 03:12:31 -05:00
Adam Honse c65edbeebc Fix UpdateLEDs for non-matrix OpenRazer devices 2020-04-19 01:22:40 -05:00
Adam Honse b6bf34279c Add disclaimer and warning about SMBus access functionality 2020-04-19 01:08:00 -05:00
Adam Honse 68e444aa3b Fix Naga Epic Chroma definition in device list 2020-04-19 00:58:02 -05:00
Adam Honse 3d12930067 Add Razer Naga Epic Chroma support (requires support in OpenRazer) 2020-04-19 00:56:42 -05:00
Adam Honse 3de7f32a3a Get Naga Chroma working 2020-04-19 00:13:06 -05:00
Adam Honse 216fe063e0 Fix apply all for Razer devices that don't have custom mode 2020-04-18 23:34:32 -05:00
Adam Honse ef6195271e Add support for OpenRazer mice with _led_effect and _led_rgb control scheme (DeathAdder Chroma) 2020-04-18 23:30:10 -05:00
Adam Honse 86eb273e46 Pull in OpenRazer improvements to OpenRazerWindows and fix some minor issues with OpenRazer controller code for both platforms 2020-04-18 20:47:34 -05:00
chris 22813c06dc Added Blackwidow X TE and Deathadder Elite + associated modes 2020-04-18 20:28:19 -05:00
Adam Honse 9840f0a8b6 Initial driver for ROG Aura Core laptop keyboards. Untested. 2020-04-18 00:24:35 -05:00
Adam Honse 69539432b5 Treat direct control as a mode in Aura Addressable controller 2020-04-16 13:53:25 -05:00
Adam Honse 4433760cab Set mode to all Aura addressable channels 2020-04-16 09:36:26 -05:00
Adam Honse ba2ce98a3e Add support for multiple addressable channels in Aura addressable controller. Direct mode only for now 2020-04-15 20:39:58 -05:00
Adam Honse 1e171fcfb0 Store and print configuration table for Aura Addressable controller 2020-04-14 19:09:27 -05:00
Adam Honse dc88b1a752 Add Aura Terminal PID to addressable controller and implement firmware string retrieval 2020-04-14 18:46:54 -05:00
Adam Honse 3f2a118a39 Add referenced projects to README 2020-04-13 12:03:43 -05:00
Adam Honse b8c80e6ba5 Fix infinite for loop in Aura Addressable controller 2020-04-11 12:43:31 -05:00
Adam Honse 405bbc5464 Remove unused variable 2020-04-11 02:34:16 -05:00
Adam Honse 5371fe1cc2 Fix infinite loop in Aura Addressable controller direct mode 2020-04-11 02:29:51 -05:00
Juri Berlanda cdce79bd07 [README] Fix typo on apt install. 2020-04-10 15:15:37 -05:00
Adam Honse 87395d0b0d Update name string for Razer Blade 15 (Mid 2019) Mercury 2020-04-10 03:27:17 -05:00
Adam Honse 7050a0dac1 Use mode specific colors for RGB Fusion 2 USB effect modes 2020-04-10 02:04:16 -05:00
Adam Honse bc01b53de5 Add Razer Tiamat 7.1 V2 to OpenRazer device list 2020-04-09 13:33:50 -05:00
Adam Honse 680c143ad7 Add the rest of the OpenRazer supported laptops to the device list 2020-04-09 12:45:13 -05:00
Adam Honse 38c3f2d94c Add Blade 15 mid-2019 (Mercury) to OpenRazer supported device list 2020-04-09 10:22:33 -05:00
Adam Honse 5344806a85 Remove submodule update steps from instructions 2020-04-09 09:34:04 -05:00
Adam Honse 21f29a1a56 Remove libe131 submodule and add necessary files to main repo. Fixes Gitlab automatic packaging issue 2020-04-09 09:29:54 -05:00
Adam Honse c5149b2521 Add links to third party projects used in OpenRGB to the README 2020-04-09 08:55:47 -05:00
Nagy Tam?s (T-bond) f9a25c9612 + Added to get current mode of zone
+ Option to get/set cycle num
 + Option to read device settings
 + Option to set/get sync settings
 * Fix GUI max led count

Signed-off-by: Nagy Tam?s (T-bond) <[email protected]>
2020-04-09 00:19:35 -05:00
Nagy Tam?s (T-bond) 4b4d3bf790 + Added read all settings data
+ Added option to configure Corsair zone settings
+ Added option to set volumes (?)

Signed-off-by: Nagy Tam?s (T-bond) <[email protected]>
2020-04-09 00:12:22 -05:00
Nagy Tam?s (T-bond) 3a11ed4e43 + Read controller ID, ROM versions, and Manufacturer + Product name. 2020-04-09 00:02:57 -05:00
Nagy Tam?s (T-bond) 238dc0f0ae + Save settings on system power off. 2020-04-08 23:25:59 -05:00
Nagy Tam?s (T-bond) 0568fc5ed2 + Added all effect to the GUI list. 2020-04-08 23:13:34 -05:00
Nagy Tam?s (T-bond) 37241ee6f2 + Started implementation of MSI Mystic Light USB controllers. 2020-04-08 23:09:21 -05:00
Martin Hartl 1f91dd227f NZXT Kraken: Add a default logo mode 2020-04-08 16:42:42 -05:00
Martin Hartl facfa05062 Add NZXT Kraken driver
Driver should work for NZXT Kraken X42/X52/X62/X72. Most of the color
modes and settings are already working. However, there are currently
some limitations in settings different ring and logo modes.
2020-04-08 16:35:41 -05:00
Adam Honse 6fd6c7f176 Initial support for addressable headers on Asus Aura motherboards. 2020-04-08 14:21:07 -05:00
Adam Honse d947cc2499 Add description to devices that were missing a description 2020-04-06 20:44:52 -05:00
Adam Honse 5db52e5dc2 Add resizing to RGB Fusion 2 USB controller addressable headers 2020-04-06 16:31:09 -05:00
Adam Honse 1249814e93 Fix segfault in Linux USB serial port auto-detection 2020-04-06 14:42:15 -05:00
Adam Honse dda8e9470f Update README 2020-04-06 11:42:43 -05:00
Adam Honse 72482d4ff9 Remove 0x66 from the Aura motherboard list as it is also in the Aura RAM list and gets double-detected if it exists 2020-04-04 20:48:16 -05:00
Adam Honse a50049e63b Add NCT6798D to Super-IO list in Windows 2020-04-04 18:41:38 -05:00
Nagy Tam?s (T-bond) 2970e56324 * Fixed Exit action on system tray icon 2020-04-04 17:08:48 -05:00
Adam Honse aa1ad8db85 Add zone resizing to CLI 2020-04-04 02:53:55 -05:00
Adam Honse 7f865cfee9 Allow up to 200 LEDs per channel on Corsair Lighting Node devices 2020-04-02 16:24:21 -05:00
Adam Honse c7b9fe90a6 Detect serial devices behind USB hubs 2020-04-01 16:57:56 -05:00
Adam Honse 0c7009b973 Update color wheel when choosing an LED from the LED selection box 2020-03-31 16:34:55 -05:00
Adam Honse d791361f22 Fix filename case to get ColorWheel building in Linux 2020-03-30 19:23:50 -05:00
Adam Honse 5719956441 Add color wheel color picker to UI 2020-03-30 17:54:25 -05:00
Adam Honse eba9fc0213 Add check to ensure we have a valid SMBus index before detecting/dumping, prevents segfaults when clicking detect on an invalid bus 2020-03-29 17:31:29 -05:00
Adam Honse 556fb634bb Clean up Redragon K556 code and add speed and color control 2020-03-29 14:54:39 -05:00
Adam Honse e39617a665 Compute checksum for Redragon K556 packets 2020-03-29 02:14:59 -05:00
Adam Honse 9f6c3819bd Increment version number post-release 2020-03-28 15:29:49 -05:00
Adam Honse 91c8ec0cb0 OpenRGB version 0.1 2020-03-28 15:06:37 -05:00
cip91sk 314283a37c add missing aura ram address 2020-03-28 14:46:02 -05:00
Adam Honse c3e5d91b6b Allow manual resizing of Hue+ channels 2020-03-28 14:37:27 -05:00
Adam Honse c769c20af1 Move static mode to top of Redragon M711 mode list 2020-03-28 14:35:14 -05:00
Adam Honse 2a43cefbe6 Add Redragon K556 modes, though grouped modes and colors aren't implemented yet 2020-03-27 23:24:16 -05:00
Adam Honse 68960b7b14 Add RGBController for Redragon K556 keyboard, only supports custom mode for now 2020-03-27 23:24:16 -05:00
Adam Honse ad85efcb14 Update Redragon code, split mouse and keyboard into their own controllers, and get mouse control working 2020-03-27 23:24:16 -05:00
Adam Honse 7c221416cc Redragon M709 and K556 development 2020-03-27 23:24:16 -05:00
Adam Honse 9ba1b2fc57 Bring in nct6775 SMBus driver improvements from updated patch to Windows 2020-03-24 18:07:23 -05:00
Adam Honse caf1e5c7f0 Update OpenRazer-win32 DLLs to openrazer commit bd864c8 2020-03-24 17:58:03 -05:00
Adam Honse 2b660a47c7 Fix wrong index being used in profile lookup that would cause segfaults if there are more controllers detected than in profile 2020-03-23 23:40:18 -05:00
Adam Honse 0c45e26c98 Add timeouts to i2c-nct6775 driver and fix kernel segfault caused by byte access with no data 2020-03-23 23:22:25 -05:00
Adam Honse fdbaf9bf63 Fix segfault in CLI 2020-03-22 22:18:30 -05:00
Adam Honse 08a1197b7e Fix arguments not parsing in CLI, add mode specific color support to CLI 2020-03-22 16:22:59 -05:00
Adam Honse 87a9ea5b14 Add some comments to the CLI code and clean up some warnings 2020-03-22 03:49:08 -05:00
Adam Honse 2b8d25559a Move help and version functions to the same place as the other arguments 2020-03-22 01:48:57 -05:00
Adam Honse 3db9189cbb Fix current device ID in CLI 2020-03-22 01:01:01 -05:00
Adam Honse a0c379e8c7 Add profile saving to command line 2020-03-22 00:26:06 -05:00
Adam Honse 0ae4964545 Clean up some of the CLI code and add option to load a profile from the command line 2020-03-22 00:04:27 -05:00
Adam Honse 69651b3f91 Load sizes for variable-size controllers in CLI mode 2020-03-20 13:50:54 -05:00
Adam Honse ce9508aa88 Allow 0x03 or 0x04 for detecting Corsair Pro DRAM 2020-03-20 13:05:49 -05:00
Adam Honse aa182936ba Clean up warnings, except in hidapi and cli files 2020-03-20 12:10:18 -05:00
Adam Honse 745bbac93b Fix i2c bus names on Linux 2020-03-20 10:20:46 -05:00
Adam Honse 5c3c15f930 Remove Synchronized Effects tab as the effects engine has been postponed until after 1.0 2020-03-20 00:39:29 -05:00
Adam Honse 4919b03bd1 Remove controller-side LED count from Corsair Lighting Node and ThermalTake Riing controllers, initialize them to zero LED count 2020-03-19 20:55:57 -05:00
Adam Honse 18c18e3999 Automatically save a sizes.ors profile when resizing a zone, then automatically load zone sizes from sizes.ors on start 2020-03-19 14:24:39 -05:00
Adam Honse 01020b50d9 Set default number of LEDs per strip in RGB Fusion 2 controller 2020-03-18 22:49:35 -05:00
Adam Honse 00f422375b Initial Corsair mouse support, tested on M65 RGB Elite. Shows as mousemat with 15 zones for now as zone mapping isn't supported yet 2020-03-13 18:55:07 -05:00
Adam Honse 25807902c9 Set each LED independently for Crucial effect modes 2020-03-13 21:41:23 +00:00
Adam Honse 0bbef425a4 Enable effects on Crucial controller, but color modes unimplemented 2020-03-13 17:20:32 +00:00
Adam Honse ec65d8a2a9 Update OpenRazer-win32 DLLs to openrazer commit 692e36b 2020-03-12 17:37:26 -05:00
Adam Honse 47df8f3414 Fix leftover un-renamed types 2020-03-12 14:53:32 -05:00
Adam Honse c560ee4b7e Rename RGBFusion2Controller to RGBFusion2USBController 2020-03-12 18:58:28 +00:00
Adam Honse 74080150e0 Rename AuraController to AuraSMBusController 2020-03-12 17:27:52 +00:00
Adam Honse ab7ddc1629 Rename HyperXController to HyperXDRAMController 2020-03-11 19:37:10 -05:00
Adam Honse 000bef969c Add more Corsair keyboards to the detection list 2020-03-11 19:19:37 -05:00
Adam Honse c8e0aec596 Use 24-bit color protocol for Corsair keyboards 2020-03-11 17:31:30 -05:00
Adam Honse ecf4427c76 Rename CorsairController to CorsairVengeanceController, CorsairProController to CorsairVengeanceProController 2020-03-11 21:15:05 +00:00
Adam Honse d299e90954 Fix 24-bit keyboard color set function 2020-03-11 12:18:24 -05:00
Adam Honse 98bb92acdb Add 24-bit color set function for keyboards 2020-03-11 15:15:43 +00:00
Adam Honse 0e77149444 Rename CorsairKeyboardController to CorsairPeripheralController 2020-03-10 21:26:36 -05:00
Adam Honse e6c21f0a72 Add firmware version to Corsair Lighting Node driver 2020-03-10 15:57:46 -05:00
Adam Honse da9f6d7c72 Add description for ASUS Aura device driver 2020-03-10 14:09:43 -05:00
Adam Honse 97975b6d36 Update description on Corsair Lighting Node driver 2020-03-10 13:59:17 -05:00
Adam Honse ad98cc173b Update description on Corsair peripheral driver 2020-03-10 11:35:16 -05:00
Adam Honse 5a33c80d65 Fix build issue in Linux in Corsair Keyboard driver 2020-03-09 20:47:07 -05:00
Adam Honse f661bf66f1 Fix button sizes a bit, it's not perfect but it's better than it was 2020-03-09 20:41:41 -05:00
Adam Honse f1e1c41d68 Add support for Corsair Polaris MM800 mousemat using CorsairKeyboardController driver 2020-03-09 20:39:55 -05:00
Adam Honse a7ed250c4e Don't initialize pointers on zones with no LEDs 2020-03-09 16:39:38 -05:00
Adam Honse 62c06202e0 Re-enable and update RGBController data block get/set functions for new API parameters. This gets profile savig and loading working again 2020-03-09 12:28:50 -05:00
Adam Honse 23ad5ca244 Fix setting individual LEDs when a specific zone is selected 2020-03-08 20:51:30 -05:00
Adam Honse 5712717ef8 Update maximum number of LEDs for Thermaltake Riing zone to 20 LEDs 2020-03-08 20:25:07 -05:00
Adam Honse da54e89839 Fix Thermaltake Riing controller 2020-03-08 17:07:57 -05:00
Adam Honse 57b8377f5a Disable built in effects before setting strip colors in RGB Fusion 2 controller 2020-03-08 17:01:09 -05:00
Adam Honse fbb718c532 Update RGB Fusion 2 controller to new RGBController API. Reworked some of the RGB Fusion 2 controller code to be more consistent with the rest of the project. 2020-03-08 12:06:21 -05:00
Adam Honse 5a469ea615 Update Corsair Keyboard controller to new RGBController API 2020-03-07 18:06:55 -06:00
Adam Honse 2099abb126 Update Patriot Viper RGB controller to new RGBController API 2020-03-07 18:01:00 -06:00
Adam Honse 4b4e939d10 Update Crucial Ballistix RGB controller to new RGBController API 2020-03-07 17:55:41 -06:00
Adam Honse e0094915fe Update ThermalTake Poseidon Z RGB controller to new RGBController API 2020-03-07 17:46:38 -06:00
Adam Honse aa6e2e611b Update HyperX Keyboard controller to new RGBController API 2020-03-07 17:37:50 -06:00
Adam Honse ce8331b467 Update Faustus controller to new RGBController API 2020-03-07 17:18:44 -06:00
Adam Honse 54ff4d57b0 Fix Hue 2 controller build on Linux 2020-03-07 17:12:31 -06:00
Adam Honse 3abb0c05ba Update Corsair Vengeance RGB Pro controller to new RGBController API 2020-03-07 17:08:04 -06:00
Adam Honse acc84f6a09 Update ASUS Aura GPU controller to new RGBController API. Also update ASUS Aura controller to read colors from hardware during initialization. 2020-03-07 16:55:02 -06:00
Adam Honse 74b0d195d9 Update Corsair Vengeance RGB controller to new RGBController API 2020-03-07 16:41:59 -06:00
Adam Honse 920e001bab Update MSI 3-Zone Keyboard controller to new RGBController API 2020-03-07 16:35:54 -06:00
Adam Honse 4c2ceed5b6 Update ASRock Polychrome controller to new RGBController API 2020-03-07 16:30:00 -06:00
Adam Honse 515c17b8dd Update MSI-RGB controller to new RGBController API 2020-03-07 16:20:35 -06:00
Adam Honse 2ffb02abde Update E1.31 controller to new RGBController API 2020-03-07 16:13:15 -06:00
Adam Honse 3237c8842a Update NZXT Hue+ and Hue 2 controllers to new RGBController API. Fix direct mode not working on Hue 2. 2020-03-07 15:56:07 -06:00
Adam Honse fde468a162 Update LED Strip controller to new RGBController API 2020-03-07 01:38:32 -06:00
Adam Honse f854441cf7 Update HyperX RGB RAM controller to new RGBController API 2020-03-07 01:28:26 -06:00
Adam Honse 408020c244 Update Gigabyte RGB Fusion 1.0 controller to new RGBController API 2020-03-07 01:10:26 -06:00
Adam Honse f806f3ad66 Update AMD Wraith Prism controller to new RGBController API 2020-03-07 01:00:58 -06:00
Adam Honse 7c1c9a7979 Update OpenRazer (Windows and Linux) controllers for new RGBController API 2020-03-07 00:38:42 -06:00
Adam Honse 283cb5a8ac Update RGB Fusion GPU controller to new RGBController API 2020-03-06 16:54:53 -06:00
Adam Honse 5f21674b8f Update Aura controller for RGBController API changes 2020-03-06 14:20:17 -06:00
Adam Honse fe6a84d6c9 Rename NodePro to LightingNode 2020-03-06 12:11:53 -06:00
Adam Honse f7cb8ca969 Delete CorsairCmdrProController files now that Corsair Pro is merged into Lighting Node driver 2020-03-05 22:26:29 -06:00
Adam Honse 64dad049f9 Set endpoint based on Corsair Lighting Node device table 2020-03-05 22:04:30 -06:00
Adam Honse 1115213d5a Consolidate Corsair Lighting Node and compatible device drivers 2020-03-05 21:12:17 -06:00
Adam Honse bc01ec0e4b Update Thermaltake Riing controller for resizable channels 2020-03-05 12:29:17 -06:00
Adam Honse 62518b5163 Update RGBController API and GUI to handle resizable zones. All controllers except for CorsairNodePro have been disabled pending rework 2020-03-04 19:29:58 -06:00
Adam Honse 736e624366 Resize button. Resizes mode specific color lists. Partial implementation of resizing zones 2020-03-04 17:53:44 -06:00
Adam Honse d7298cafd0 Fix build on Linux 2020-03-03 22:06:46 -06:00
Adam Honse 70783fb28f Add button to delete profiles and confirmation dialog 2020-03-03 21:15:33 -06:00
Adam Honse 45a5f629e5 Do a complete refresh of profile list when saving profile 2020-03-03 21:02:50 -06:00
Adam Honse ec73337929 Update OpenRazer-Win32 DLLs to fix corrupt serial and version strings, enable reading these in OpenRGB. 2020-03-03 13:22:23 -06:00
Adam Honse 148b84b7d1 Add support for ASRock Polychrome FW 3.04 (X570 Taichi) 2020-03-03 12:15:55 -06:00
Adam Honse 3cf855bd10 Search through controller list for each controller when loading profile, allows controller order to change without breaking the profile 2020-03-03 12:11:21 -06:00
Adam Honse 9deb0f8fff Move profile code from Qt UI to new ProfileManager class 2020-03-02 16:05:07 -06:00
Adam Honse 8c86686d01 Delay 200ms after changing Poseidon Z RGB mode so that direct colors are set correctly 2020-03-01 22:12:51 -06:00
Adam Honse c451487401 Change direct effects mode back to Direct mode on HyperX keyboard 2020-03-01 22:04:52 -06:00
Adam Honse 5defbc1580 Fix color mode for Thermaltake Riing direct mode 2020-03-01 22:00:24 -06:00
Adam Honse b5af840dcc Fix possible out of bounds access when initializing Aura RAM addresses 2020-03-01 21:50:08 -06:00
Adam Honse 1b170ff664 Update libusb DLLs to include a small change to fix detection of some composite HID devices such as RGB keyboards. Source for this new DLL at my libusb fork - https://github.com/CalcProgrammer1/libusb 2020-03-01 21:42:43 -06:00
Adam Honse 31a6da1b21 Build hidapi from source using libusb backend. This requires installation of WinUSB driver on Windows but fixes issues with Windows-specific HID implementation 2020-03-01 21:16:22 -06:00
Adam Honse cb6dfd83d8 Add refreshing thread for HyperX keyboard Direct mode 2020-03-01 20:57:04 -06:00
Adam Honse 50ea274205 Add timeouts to fix HyperX and Poseidon Z RGB in Linux 2020-03-01 20:56:07 -06:00
Adam Honse c7960c090a Add software version information to CLI 2020-02-29 14:01:06 -06:00
Adam Honse 85b2545409 Fill in software information and set version to 0.0 for now 2020-02-29 13:45:43 -06:00
Adam Honse e10881db3e Add empty software information tab to information UI 2020-02-28 12:31:32 -06:00
Adam Honse 977feabe6e Add profile selection to system tray icon menu 2020-02-27 13:16:10 -06:00
Adam Honse a6c9d1232a Don't apply colors unless per LED mode 2020-02-26 21:16:02 -06:00
Adam Honse 4024e6de85 Fix build on Linux 2020-02-26 19:40:25 -06:00
Adam Honse f3df584d3a Don't update devices if the profile could not be loaded 2020-02-26 19:36:00 -06:00
Adam Honse 60a0ab5c93 Populate profile list with .orp files and load profile selected in list 2020-02-26 19:36:00 -06:00
Adam Honse c908847577 Add dialog to name profile. Save all controllers to a single file. Add a file header with version number and use extension .orp for OpenRgb Profile 2020-02-26 19:36:00 -06:00
Adam Honse bd027e596e Set colors when updating mode 2020-02-26 19:36:00 -06:00
Adam Honse 51c3568f7a Profile save and load test 2020-02-26 19:36:00 -06:00
Adam Honse 4f8db7d63f Add cstring include to fix build on Linux 2020-02-25 21:07:06 -06:00
Adam Honse f844c2fb07 Add functions to get/set RGBController parameters to/from a binary data buffer. Add a dummy RGBController object to load data into. 2020-02-25 18:09:14 -06:00
Adam Honse f7041988e4 Fix off-by-one errors in Aura RAM address assignment 2020-02-25 14:20:59 -06:00
Stefan Reiter 71c650cd45 Add cli.cpp and make it build at least
Not confirmed working as of yet, but at least it builds and
--list-devices works.

Code originally taken from Sam Lewis (@sam-masaki on gitlab.com), see:
https://gitlab.com/CalcProgrammer1/OpenRGB/-/merge_requests/9
2020-02-24 00:03:07 -06:00
Stefan Reiter 3c6ac31eab Introduce device_type_to_str 2020-02-23 23:40:26 -06:00
Stefan Reiter 20a99ef7ef Append LED number to Aura devices' LEDs
Makes identifying them easier then just 'Unknown' 8 times in a row.
2020-02-23 23:40:11 -06:00
Stefan Reiter c69a98096b Remove debug print
Annoying when in CLI mode
2020-02-23 23:39:13 -06:00
Adam Honse 92afebe2c7 Fix Windows build 2020-02-23 19:09:03 -06:00
jackun 5b82eb39a8 RGB Fusion 2 (IT8297BX) support based on Gigabyte X570 Elite. 2020-02-23 18:26:48 -06:00
Adam Honse 7b120515d8 Fix include path for NvAPI 2020-02-23 15:54:23 -06:00
Adam Honse b480bbd666 Clean up NvAPI I2C code and allow multiple GPUs 2020-02-23 15:54:14 -06:00
Adam Honse 5e5ac81f53 Get detection working (tested on nouveau in Linux) 2020-02-23 15:54:06 -06:00
Adam Honse adcd59848a Add RGB Fusion GPU controller and NVAPI I1C interface 2020-02-23 15:53:54 -06:00
Adam Honse 937cbc656e Add Windows application icon 2020-02-20 00:37:31 -06:00
Jan Rettig aead384282 Aura GPU Support 2020-02-19 21:24:36 -06:00
Adam Honse b717600c37 Add name, description, and type information to MSI-RGB controller 2020-02-19 21:05:04 -06:00
Adam Honse f38be5119e MSI-RGB driver based on https://github.com/nagisa/msi-rgb 2020-02-19 20:19:12 -06:00
Adam Honse f8de686296 Add LED numbers to Linux OpenRazer controller 2020-02-19 19:42:49 -06:00
Adam Honse 0703fb8c68 Support 64-bit Windows builds 2020-02-19 10:24:56 -06:00
Adam Honse 8d0915de6e Add support for mode specific colors in HyperX keyboard breathing mode 2020-02-18 11:01:43 -06:00
Adam Honse ef33d7e2c4 Firmware 2.x seems to use ASR LED protocol, confirmed on 2.08 2020-02-16 13:43:57 -06:00
Adam Honse bba88eb1f2 Update mode color description to add mode-specific colors. 2020-02-16 12:09:11 -06:00
Adam Honse 7b35cf72f7 Add zone numbers to Chroma HDK and add LED numbers for all OpenRazer zones. 2020-02-13 12:36:57 -06:00
Adam Honse 9603489f4a Get rid of razerchromahdk driver as it was never merged and use razeraccessory instead 2020-02-13 12:36:57 -06:00
Adam Honse d4cd2a6853 Add direction control to OpenRazer Wave mode 2020-02-13 12:36:57 -06:00
Adam Honse c4d2f72df1 Clean up Linux OpenRazer code to match Windows and break out device list into a shared header file 2020-02-13 12:36:57 -06:00
Adam Honse 1a07aee7a6 Add OpenRazer-Win32 driver to support Razer devices on Windows without official software 2020-02-13 12:36:57 -06:00
Adam Honse 415d79a3ef Remove Razer Chroma SDK backend 2020-02-13 12:33:31 -06:00
Adam Honse fd59f83556 Update Crucial controller to new RGBController format 2020-02-12 14:51:07 -06:00
Adam Honse 7adcfa77fa Add function for setting Crucial Ballistix RGB colors in direct mode 2020-02-12 14:39:44 -06:00
Adam Honse b338fbca3c Initial driver for Crucial Ballistix RGB 2020-02-12 14:39:44 -06:00
Adam Honse aba3a3fd23 Add 0x39, 0x3B, 0x3C, and 0x3D to Aura DRAM search addresses list 2020-02-12 13:23:35 -06:00
Adam Honse cb680508a5 Add Polychrome firmware 2.08 to supported firmware list 2020-02-12 13:02:28 -06:00
Adam Honse 2104c975be Update RGB Fusion 2 to build with latest RGBController format 2020-02-12 12:27:15 -06:00
Adam Honse 339e1e14c2 Swap red and blue channels in RGB Fusion 2.0 packet after it was found that they were reversed 2020-02-12 12:20:50 -06:00
Adam Honse dca3b0d733 Forgot to send the apply packet 2020-02-12 12:20:30 -06:00
Adam Honse c52eb528ea RGB Fusion 2.0 driver based on summerblind's code 2020-02-12 12:20:30 -06:00
Adam Honse 3948e74711 Use /dev/port to make Super IO functions work on Linux 2020-02-11 20:25:28 -06:00
Adam Honse 4672d4a686 Move Super IO functionality to its own file to make it easier to write an MSI-RGB driver 2020-02-11 19:58:13 -06:00
Adam Honse befa9baf20 Update the ThermaltakeRiing driver to just set the active_mode variable instead of actually sending mode updates on SetCustomMode 2020-02-11 18:07:57 -06:00
Adam Honse 077cda545e Clean up the Corsair keyboard driver with some private packet sending functions 2020-02-11 18:01:31 -06:00
Adam Honse e934ce2c23 Add addresses 0x5E and 0x5F to Corsair DRAM detection 2020-02-11 16:18:39 -06:00
Adam Honse b10ff42df2 Add addresses 0x5E and 0x5F to Corsair Pro DRAM detection 2020-02-11 16:18:38 -06:00
Adam Honse afb6ff6a74 Update the rest of the RGBController drivers to just set the active_mode variable instead of actually sending mode updates on SetCustomMode 2020-02-10 00:26:18 -06:00
Adam Honse 6828335dc5 Just set active_mode rather than call SetMode for SetCustomModefunction. Implement for a few tested devices only for now. Fix some user interface issues with custom mode selection. 2020-02-10 00:17:02 -06:00
Adam Honse 966297710b Fix custom mode setting in UI 2020-02-09 19:55:26 -06:00
Adam Honse 443d558ac2 Remove compiler warning that is treated as error on some systems 2020-02-09 19:06:50 -06:00
Adam Honse 2cd0b64251 Add mode control to Thermaltake Riing controller 2020-02-09 15:26:20 -06:00
Adam Honse 7ad3c18e3f Remove unused declarations 2020-02-09 14:43:24 -06:00
Adam Honse fc11427019 Remove serial port include for USB controllers that were copied from the Hue+ driver 2020-02-09 14:37:50 -06:00
Adam Honse 2f00fb9186 Add initial driver for Thermaltake Riing controller. Fixed configuration has 9 LEDs for channels 1, 2, and 3 but will make this configurable in the future. Only direct mode supported so far 2020-02-09 14:34:26 -06:00
Adam Honse ea1f21106c Fix Linux build of CorsairKeyboardController (missing include for memset) 2020-02-06 16:37:21 -06:00
Adam Honse 47ca068628 Number the LEDs in E131 and LEDStrip controllers 2020-02-06 12:26:14 -06:00
Adam Honse f07cc134bb Add zones and LEDs to Corsair keyboard controller, but keys don't line up with zones yet 2020-02-05 21:05:55 -06:00
Adam Honse 1d98ce063c Add zones and LEDs to Poseidon Z RGB controller 2020-02-05 17:34:08 -06:00
Adam Honse 9ddb9f04ce Add zones and LEDs to HyperX Keyboard controller 2020-02-05 13:09:39 -06:00
Adam Honse 8aee3c427b Fix segfault 2020-02-04 20:22:01 -06:00
Adam Honse 6a6ad0dda6 Keyboard fixes for Linux 2020-02-04 20:20:45 -06:00
Adam Honse 12116c70ee Big Keyboard Update! HyperX Alloy Elite support, Poseidon Z RGB modes, and Corsair K70 RGB 2020-02-04 20:17:09 -06:00
Adam Honse 7d6699cf9c Use ASR LED mode for Polychrome 2.10 firmware 2020-02-02 00:34:11 -06:00
Adam Honse 48b9be3f76 Add Polychrome firmware 2.10 to list 2020-02-01 20:38:52 -06:00
Adam Honse 760c57c29c Only show LEDs for selected Zone, add an All Zones option to Zone box 2020-02-01 12:54:51 -06:00
Adam Honse c6cc88ba7b The color boxes got moved around during the UI rework. Move them back to their proper rainbow order 2020-01-31 18:32:22 -06:00
Adam Honse 779471e3e4 Detect NZXT Smart Device V2 and use the Hue 2 driver for it 2020-01-31 11:08:33 -06:00
Adam Honse adb9a6e59f Add support for Aer 2 140mm fan on Hue 2 2020-01-30 10:42:43 -06:00
Adam Honse d48bcec5ba Block write Polychrome mode value instead of byte write 2020-01-29 13:02:00 -06:00
Adam Honse 80d2282313 Add modes and additional set functions to Polychrome controller 2020-01-29 12:32:32 -06:00
k1-801 a4474602d8 Add basic support for Asus TUF laptop keyboards through Faustus 2020-01-28 09:10:34 -06:00
Marco Zanin (B--B) d28be0640e Qt: fix layout issues on KDE
Use GridLayout and allow app resize when user resize/expand the window
Also fixes some buttons size

TEST: compiled on KDE 5.17.90, after this commit all pages
      resize correctly when window is resized

Signed-off-by: Marco Zanin (B--B) <[email protected]>
2020-01-27 19:41:31 -06:00
Adam Honse 5b17833c6e Remove some detection checks for Corsair Vengeance RGB Pro detection as it was no longer detecting my modules with them 2020-01-25 17:37:32 -06:00
Adam Honse e8e9a1e7e5 Set custom mode when applying color to all devices 2020-01-25 17:37:32 -06:00
Adam Honse d7740c2d28 Move Get/Set mode functions to generic RGBController.cpp functions and add device-specific UpdateMode function to use active_mode value 2020-01-25 17:37:32 -06:00
Adam Honse f110589f91 Fix some small issues with AMD Wraith Prism driver 2020-01-25 17:37:32 -06:00
Adam Honse b3c1cdf63d Fix issues with inverted speed and random flag 2020-01-25 17:37:32 -06:00
Adam Honse 6b789be1e1 Add speed control to HyperX driver 2020-01-25 17:37:32 -06:00
Adam Honse 12f307228b Clean up speed values for Patriot Viper RGB 2020-01-25 17:37:32 -06:00
Adam Honse 848ea8b064 Shifted the wrong way... 2020-01-25 17:37:32 -06:00
Adam Honse 438c3840a7 Add speed control to RGB Fusion 1.0 driver 2020-01-25 17:37:32 -06:00
Adam Honse fef6f4cba3 Add delay to improve Corsair Pro detection, default modes to down instead of left, clean up Wraith Prism initialization 2020-01-25 17:37:32 -06:00
Adam Honse d38543a820 Finish AMD Wraith Prism mode updates including working speed table, working random color flag, and appropriate fan/logo modes for ring-specific effects 2020-01-25 17:37:32 -06:00
Adam Honse 2a76201ca4 Implement a speed table for AMD Wraith Prism to use the values taken from the official software. Interpolation was causing strange issues. 2020-01-25 17:37:32 -06:00
Adam Honse 2e84e9808c Start adding modes to AMD Wraith Prism driver. Speed and random bit implemented, but it seems to have issues. Speeds way too fast 2020-01-25 17:37:32 -06:00
Adam Honse ee492632ac Prepare AMD Wraith Prism driver for mode control 2020-01-25 17:37:32 -06:00
Adam Honse fd16bc3053 Add direction support to Corsair Vengeance RGB Pro 2020-01-25 17:37:32 -06:00
Adam Honse 64f11b42f4 Add direction support for NZXT Hue 2 2020-01-25 17:37:32 -06:00
Adam Honse 7ba610df77 Add direction support to Corsair Commander/Lighting Node Pro 2020-01-25 17:37:32 -06:00
Adam Honse a76bd7b974 Add direction support for NZXT Hue+ 2020-01-25 17:37:32 -06:00
Adam Honse 7999620db2 Fix Corsair Commander Pro/Lighting Node Pro on Linux 2020-01-25 17:37:32 -06:00
Adam Honse 585eb8a5a3 Add direction support 2020-01-25 17:37:32 -06:00
Adam Honse f1523adcdf Add the rest of the Corsair Commander/Lighting Node Pro modes 2020-01-25 17:37:32 -06:00
Adam Honse 1113c7874f Add label to Speed slider 2020-01-25 17:37:32 -06:00
Adam Honse ab03311717 Copy Corsair Commander Pro updates to Lighting Node Pro driver. Need to consolidate these eventually 2020-01-25 17:37:32 -06:00
Adam Honse d13971b7ce Add inverted speed flag to device UI to handle devices where slowest speed is a larger value than fastest speed 2020-01-25 17:37:32 -06:00
Adam Honse 5bc94fd677 Speed values are reversed on Corsair Commander Pro. Removed all references to SendKeepalive function. 2020-01-25 17:37:32 -06:00
Adam Honse 90dfa5678b Clean up Corsair Commander Pro code and get effects mode working 2020-01-25 17:37:32 -06:00
Adam Honse 48ba8435b1 Initial Corsair Commander Pro support, it's the same protocol as the Lighting Node Pro but on a different endpoint 2020-01-25 17:37:32 -06:00
Adam Honse cf2c2d6b93 Add speed control to Hue 2 2020-01-25 17:37:32 -06:00
Adam Honse 4b8668e0ef Add speed control for Hue+ and add support for Wings mode 2020-01-25 17:37:32 -06:00
Adam Honse 0bc5982970 Add random color modes for HyperX Predator RGB 2020-01-25 17:37:32 -06:00
Adam Honse 2ae74c1e7f Add slider for speed control, add min/max speed parameters to mode information, update Corsair Pro and Patriot Viper drivers to include speed control 2020-01-25 17:37:32 -06:00
Adam Honse abd4c87b1e Fix Corsair Pro mode initialization 2020-01-25 17:37:32 -06:00
Adam Honse fb3103e458 Add mode parameters to Corsair Vengeance RGB Pro controller 2020-01-25 17:37:32 -06:00
Adam Honse c70943da18 Add Random Color checkbox and combine Aura fixed-color and cycling ("random") modes to use this new checkbox 2020-01-25 17:37:32 -06:00
Adam Honse 2efd0dc81d Add additional mode parameters to RGBController API and update most of the RGBController drivers' mode specifications to match 2020-01-25 17:37:32 -06:00
Adam Honse 8b8012a431 Update README.md 2020-01-15 22:43:22 +00:00
Adam Honse 0716f55880 Remove debug printout that was left in Hue code 2020-01-12 23:10:25 -06:00
Adam Honse bcc95abe53 Add keepalive thread to Corsair Lighting Node Pro driver 2020-01-12 22:57:30 -06:00
Adam Honse bb7852a3e4 Remove list of devices from README and replace it with a link to the wiki. The wiki is more up to date. 2020-01-13 04:33:00 +00:00
Adam Honse d79c7e9c04 Initial driver for Corsair Lighting Node Pro 2020-01-12 14:04:01 -06:00
Adam Honse fa4d9ebbf6 Get hidapi stuff building on Linux 2020-01-09 19:13:19 -06:00
Adam Honse ec8cdf1e26 Bring in USB HID device support with hidapi and add support for two new HID devices - MSI/SteelSeries 3-zone laptop keyboard and Thermaltake TtEsports Poseidon Z RGB keyboard 2020-01-09 19:00:08 -06:00
Adam Honse 1d6e0cf6a4 Fix mode initialization, fix mode map for Corsair Pro 2020-01-09 13:36:06 -06:00
Adam Honse b06d56bb2d Add Aer 1 fan support to NZXT Hue 2 and Hue+ 2020-01-08 21:21:11 -06:00
Adam Honse 50c9f7b84b More color vector initialization improvements 2020-01-08 21:20:54 -06:00
Adam Honse dd6a6ca85a Increase timeout after sending Hue+ packet so it works in Linux as well as Windows 2020-01-07 23:17:13 -06:00
Adam Honse 4d5003f49d Some code cleanup - set colors vector size for improved performance and add sleep to fix Hue Plus device update 2020-01-07 21:00:02 -06:00
Adam Honse 7226a4164f Hue 2 channel is a bitfield rather than a value 2020-01-06 23:01:51 -06:00
Adam Honse c7030ad47d Rework the RGBController API to handle the colors vector outside of device specific implementations 2020-01-06 21:23:26 -06:00
Adam Honse 11770aaa3a Add Quick Colors to tray icon 2020-01-06 16:25:01 -06:00
Adam Honse f8212ca59e Add Lights Off option to tray icon menu 2020-01-06 15:30:45 -06:00
Adam Honse dbf3dd86b4 Add tray icon with options to show/hide and exit 2020-01-06 12:31:37 -06:00
Adam Honse 0fe3adc267 Add UpdateLEDs function support to HyperX controller 2020-01-05 18:29:40 -06:00
Adam Honse f45b20602b Add UpdateLEDs function support for Viper, Hue2, Hue+, Wraith Prism 2020-01-05 18:07:47 -06:00
Adam Honse f6bf044ba0 Add functions for setting Hue+ and Hue 2 effect modes 2020-01-05 17:22:43 -06:00
Adam Honse 420e4dc077 Fix bug in NZXT Hue 2 code 2020-01-05 13:49:30 -06:00
Adam Honse 3c77c1a9a8 Add support on Hue 2 for Aer 2 fans 2020-01-05 13:38:57 -06:00
Adam Honse 5074a923d1 Add functions to get serial port path from USB VID/PID for both Windows and Linux. Use this function to automatically detect the presence of an NZXT Hue+. 2020-01-05 12:52:33 -06:00
268 changed files with 34321 additions and 6706 deletions
+1
View File
@@ -0,0 +1 @@
*.pro.user*
+3 -3
View File
@@ -1,3 +1,3 @@
[submodule "dependencies/libe131"]
path = dependencies/libe131
url = https://github.com/CalcProgrammer1/libe131
[submodule "razer-drivers-win32"]
path = razer-drivers-win32
url = https://github.com/rsandoz/razer-drivers-win32
@@ -18,9 +18,19 @@ AMDWraithPrismController::AMDWraithPrismController(libusb_device_handle* dev_han
strcpy(device_name, "AMD Wraith Prism");
current_fan_mode = AMD_WRAITH_PRISM_FAN_LOGO_MODE_STATIC;
current_fan_speed = 0xFF;
current_fan_random_color = false;
current_logo_mode = AMD_WRAITH_PRISM_FAN_LOGO_MODE_STATIC;
current_logo_speed = 0xFF;
current_logo_random_color = false;
current_ring_mode = AMD_WRAITH_PRISM_EFFECT_CHANNEL_STATIC;
current_ring_speed = 0xFF;
current_ring_direction = false;
SendEnableCommand();
SetRingEffectChannel(0x00);
SendApplyCommand();
}
AMDWraithPrismController::~AMDWraithPrismController()
@@ -116,133 +126,83 @@ std::string AMDWraithPrismController::GetFirmwareVersionString()
return(ret_string);
}
void AMDWraithPrismController::SetFanMode(unsigned char mode, unsigned char speed, bool random_color)
{
current_fan_mode = mode;
current_fan_speed = speed_values_fan_logo[mode][speed];
current_fan_random_color = random_color;
}
void AMDWraithPrismController::SetFanColor(unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char usb_buf[] =
{
0x51, 0x2C, 0x01, 0x00,
0x06, 0xFF, 0x00, 0x01,
0xFF, 0xFF, 0x00, 0xFF,
0x00, 0x00, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF
};
SendEffectChannelUpdate
(
AMD_WRAITH_PRISM_EFFECT_CHANNEL_FAN_LED,
current_fan_speed,
false,
current_fan_random_color,
current_fan_mode,
max_brightness_fan_logo[current_fan_mode],
red,
green,
blue
);
}
int actual;
usb_buf[0x0A] = red;
usb_buf[0x0B] = green;
usb_buf[0x0C] = blue;
libusb_interrupt_transfer(dev, 0x04, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
void AMDWraithPrismController::SetLogoMode(unsigned char mode, unsigned char speed, bool random_color)
{
current_logo_mode = mode;
current_logo_speed = speed_values_fan_logo[mode][speed];
current_logo_random_color = random_color;
}
void AMDWraithPrismController::SetLogoColor(unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char usb_buf[] =
{
0x51, 0x2C, 0x01, 0x00,
0x05, 0xFF, 0x00, 0x01,
0xFF, 0xFF, 0x00, 0xFF,
0x00, 0x00, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF
};
SendEffectChannelUpdate
(
AMD_WRAITH_PRISM_EFFECT_CHANNEL_LOGO_LED,
current_logo_speed,
false,
current_logo_random_color,
current_logo_mode,
max_brightness_fan_logo[current_logo_mode],
red,
green,
blue
);
}
int actual;
usb_buf[0x0A] = red;
usb_buf[0x0B] = green;
usb_buf[0x0C] = blue;
libusb_interrupt_transfer(dev, 0x04, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
void AMDWraithPrismController::SetRingMode(unsigned char mode, unsigned char speed, bool direction, bool random_color)
{
current_ring_mode = mode;
current_ring_speed = speed_values_ring[mode][speed];
current_ring_direction = direction;
current_ring_random_color = random_color;
}
void AMDWraithPrismController::SetRingColor(unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char usb_buf[] =
{
0x51, 0x2C, 0x01, 0x00,
0x00, 0xFF, 0x00, 0xFF,
0xFF, 0xFF, 0x00, 0xFF,
0x00, 0x00, 0x00, 0x00,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF
};
SetRingEffectChannel(current_ring_mode);
int actual;
SendEffectChannelUpdate
(
current_ring_mode,
current_ring_speed,
current_ring_direction,
current_ring_random_color,
mode_value_ring[current_ring_mode],
max_brightness_ring[current_ring_mode],
red,
green,
blue
);
usb_buf[0x0A] = red;
usb_buf[0x0B] = green;
usb_buf[0x0C] = blue;
libusb_interrupt_transfer(dev, 0x04, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
SendApplyCommand();
}
void AMDWraithPrismController::SetRingEffectChannel(unsigned char channel)
{
unsigned char usb_buf[] =
{
0x51, 0xA0, 0x01, 0x00,
0x00, 0x03, 0x00, 0x00,
0x05, 0x06, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07,
0x07, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
};
int actual;
for(int led = 0x0A; led <= 0x18; led++)
{
usb_buf[led] = channel;
}
libusb_interrupt_transfer(dev, 0x04, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
SendChannelRemap(channel, AMD_WRAITH_PRISM_EFFECT_CHANNEL_LOGO_LED, AMD_WRAITH_PRISM_EFFECT_CHANNEL_FAN_LED);
}
void AMDWraithPrismController::SendEnableCommand()
@@ -301,7 +261,18 @@ void AMDWraithPrismController::SendApplyCommand()
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
}
void AMDWraithPrismController::SendEffectCommand()
void AMDWraithPrismController::SendEffectChannelUpdate
(
unsigned char effect_channel,
unsigned char speed,
bool direction,
bool random_color,
unsigned char mode,
unsigned char brightness,
unsigned char red,
unsigned char green,
unsigned char blue
)
{
unsigned char usb_buf[] =
{
@@ -325,6 +296,53 @@ void AMDWraithPrismController::SendEffectCommand()
int actual;
usb_buf[0x04] = effect_channel;
usb_buf[0x05] = speed;
usb_buf[0x06] = (direction ? 0x01 : 0x00) | (random_color ? 0x80 : 0x00);
usb_buf[0x07] = mode;
usb_buf[0x09] = brightness;
usb_buf[0x0A] = red;
usb_buf[0x0B] = green;
usb_buf[0x0C] = blue;
libusb_interrupt_transfer(dev, 0x04, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
}
void AMDWraithPrismController::SendChannelRemap(unsigned char ring_channel, unsigned char logo_channel, unsigned char fan_channel)
{
unsigned char usb_buf[] =
{
0x51, 0xA0, 0x01, 0x00,
0x00, 0x03, 0x00, 0x00,
0x05, 0x06, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07,
0x07, 0x07, 0x07, 0x07,
0x07, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
};
int actual;
usb_buf[0x08] = logo_channel;
usb_buf[0x09] = fan_channel;
for(int led = 0x0A; led <= 0x18; led++)
{
usb_buf[led] = ring_channel;
}
libusb_interrupt_transfer(dev, 0x04, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x83, usb_buf, 64, &actual, 0);
}
@@ -12,6 +12,100 @@
#pragma once
static const unsigned char max_brightness_fan_logo[] =
{
0x00,
0xFF,
0x7F,
0xFF
};
static const unsigned char speed_values_fan_logo[][5] =
{
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* */
{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }, /* Static */
{ 0x96, 0x8C, 0x80, 0x6E, 0x68 }, /* Color Cycle */
{ 0x3C, 0x37, 0x31, 0x2C, 0x26 }, /* Breathing */
};
static const unsigned char max_brightness_ring[] =
{
0xFF,
0xFF,
0x7F,
0x00,
0x00,
0x00,
0x00,
0xFF,
0xFF,
0xFF,
0xFF,
0xFF
};
static const unsigned char mode_value_ring[] =
{
0xFF,
0x03,
0xFF,
0x00,
0x00,
0x00,
0x00,
0x05,
0xFF,
0xC3,
0x4A,
0x05
};
static const unsigned char speed_values_ring[][5] =
{
{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }, /* Static */
{ 0x3C, 0x37, 0x31, 0x2C, 0x26 }, /* Breathing */
{ 0x96, 0x8C, 0x80, 0x6E, 0x68 }, /* Color Cycle */
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* */
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* */
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* */
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* */
{ 0x72, 0x68, 0x64, 0x62, 0x61 }, /* Rainbow */
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* Bounce */
{ 0x77, 0x74, 0x6E, 0x6B, 0x67 }, /* Chase */
{ 0x77, 0x74, 0x6E, 0x6B, 0x67 }, /* Swirl */
{ 0x00, 0x00, 0x00, 0x00, 0x00 }, /* Morse Code */
};
enum
{
AMD_WRAITH_PRISM_FAN_LOGO_MODE_STATIC = 0x01, /* Fan/Logo Static Mode */
AMD_WRAITH_PRISM_FAN_LOGO_MODE_COLOR_CYCLE = 0x02, /* Fan/Logo Color Cycle Mode */
AMD_WRAITH_PRISM_FAN_LOGO_MODE_BREATHING = 0x03, /* Fan/Logo Breathing Mode */
};
enum
{
AMD_WRAITH_PRISM_EFFECT_CHANNEL_STATIC = 0x00, /* Static effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_BREATHING = 0x01, /* Breathing effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_COLOR_CYCLE = 0x02, /* Color cycle effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_LOGO_LED = 0x05, /* Logo LED effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_FAN_LED = 0x06, /* Fan LED effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_RAINBOW = 0x07, /* Rainbow effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_BOUNCE = 0x08, /* Bounce effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_CHASE = 0x09, /* Chase effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_SWIRL = 0x0A, /* Swirl effect channel */
AMD_WRAITH_PRISM_EFFECT_CHANNEL_MORSE = 0x0B, /* Morse code effect channel */
};
enum
{
AMD_WRAITH_PRISM_SPEED_SLOWEST = 0x00, /* Slowest speed */
AMD_WRAITH_PRISM_SPEED_SLOW = 0x01, /* Slow speed */
AMD_WRAITH_PRISM_SPEED_NORMAL = 0x02, /* Normal speed */
AMD_WRAITH_PRISM_SPEED_FAST = 0x03, /* Fast speed */
AMD_WRAITH_PRISM_SPEED_FASTEST = 0x04, /* Fastest speed */
};
class AMDWraithPrismController
{
public:
@@ -25,15 +119,48 @@ public:
void SetRingEffectChannel(unsigned char channel);
void SetFanMode(unsigned char mode, unsigned char speed, bool random_color);
void SetFanColor(unsigned char red, unsigned char green, unsigned char blue);
void SetLogoColor(unsigned char red, unsigned char green, unsigned char blue);
void SetRingColor(unsigned char red, unsigned char green, unsigned char blue);
void SendEnableCommand();
void SendApplyCommand();
void SendEffectCommand();
void SetLogoMode(unsigned char mode, unsigned char speed, bool random_color);
void SetLogoColor(unsigned char red, unsigned char green, unsigned char blue);
void SetRingMode(unsigned char mode, unsigned char speed, bool direction, bool random_color);
void SetRingColor(unsigned char red, unsigned char green, unsigned char blue);
private:
char device_name[32];
libusb_device_handle* dev;
unsigned char current_fan_mode;
unsigned char current_fan_speed;
bool current_fan_random_color;
unsigned char current_logo_mode;
unsigned char current_logo_speed;
bool current_logo_random_color;
unsigned char current_ring_mode;
unsigned char current_ring_speed;
bool current_ring_direction;
bool current_ring_random_color;
void SendEnableCommand();
void SendApplyCommand();
void SendEffectChannelUpdate
(
unsigned char effect_channel,
unsigned char speed,
bool direction,
bool random_color,
unsigned char mode,
unsigned char brightness,
unsigned char red,
unsigned char green,
unsigned char blue
);
void SendChannelRemap(unsigned char ring_channel, unsigned char logo_channel, unsigned char fan_channel);
};
@@ -0,0 +1,125 @@
/*-----------------------------------------*\
| AuraCoreController.cpp |
| |
| Driver for ASUS ROG Aura Core RGB |
| lighting controller |
| |
| Adam Honse (CalcProgrammer1) 4/13/2020 |
\*-----------------------------------------*/
#include "AuraCoreController.h"
#include <cstring>
AuraCoreController::AuraCoreController(hid_device* dev_handle)
{
dev = dev_handle;
}
AuraCoreController::~AuraCoreController()
{
}
void AuraCoreController::SendBrightness
(
unsigned char brightness
)
{
unsigned char usb_buf[17];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x5A;
usb_buf[0x01] = AURA_CORE_COMMAND_BRIGHTNESS;
usb_buf[0x02] = 0xC5;
usb_buf[0x03] = 0xC4;
usb_buf[0x04] = brightness;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, usb_buf, 17);
}
void AuraCoreController::SendUpdate
(
unsigned char zone,
unsigned char mode,
unsigned char speed,
unsigned char red,
unsigned char green,
unsigned char blue
)
{
unsigned char usb_buf[17];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x5D;
usb_buf[0x01] = AURA_CORE_COMMAND_UPDATE;
usb_buf[0x02] = zone;
usb_buf[0x03] = mode;
usb_buf[0x04] = red;
usb_buf[0x05] = green;
usb_buf[0x06] = blue;
usb_buf[0x07] = speed;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, usb_buf, 17);
}
void AuraCoreController::SendSet()
{
unsigned char usb_buf[17];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x5D;
usb_buf[0x01] = AURA_CORE_COMMAND_SET;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, usb_buf, 17);
}
void AuraCoreController::SendApply()
{
unsigned char usb_buf[17];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x5D;
usb_buf[0x01] = AURA_CORE_COMMAND_APPLY;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, usb_buf, 17);
}
@@ -0,0 +1,76 @@
/*-----------------------------------------*\
| AuraCoreController.h |
| |
| Definitions and types for ASUS ROG Aura |
| Core RGB lighting controller |
| |
| Adam Honse (CalcProgrammer1) 4/13/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
AURA_CORE_MODE_STATIC = 0, /* Static color mode */
AURA_CORE_MODE_BREATHING = 1, /* Breathing effect mode */
AURA_CORE_MODE_SPECTRUM_CYCLE = 2, /* Spectrum Cycle mode */
};
enum
{
AURA_CORE_COMMAND_UPDATE = 0xB3, /* Update mode and color */
AURA_CORE_COMMAND_SET = 0xB5, /* Set command */
AURA_CORE_COMMAND_APPLY = 0xB4, /* Apply command */
AURA_CORE_COMMAND_BRIGHTNESS = 0xBA, /* Brightness command */
};
enum
{
AURA_CORE_ZONE_IDX_ALL = 0x00, /* Update all zones */
AURA_CORE_ZONE_IDX_1 = 0x01, /* Update zone 1 */
AURA_CORE_ZONE_IDX_2 = 0x02, /* Update zone 2 */
AURA_CORE_ZONE_IDX_3 = 0x03, /* Update zone 3 */
AURA_CORE_ZONE_IDX_4 = 0x04, /* Update zone 4 */
};
enum
{
AURA_CORE_SPEED_SLOW = 0xE1, /* Slowest speed */
AURA_CORE_SPEED_NORMAL = 0xEB, /* Normal speed */
AURA_CORE_SPEED_FAST = 0xF5, /* Fastest speed */
};
class AuraCoreController
{
public:
AuraCoreController(hid_device* dev_handle);
~AuraCoreController();
void SendBrightness
(
unsigned char brightness
);
void SendUpdate
(
unsigned char zone,
unsigned char mode,
unsigned char speed,
unsigned char red,
unsigned char green,
unsigned char blue
);
void SendSet();
void SendApply();
private:
hid_device* dev;
};
@@ -0,0 +1,45 @@
#include "AuraCoreController.h"
#include "RGBController.h"
#include "RGBController_AuraCore.h"
#include <vector>
#include <hidapi/hidapi.h>
#define AURA_CORE_VID 0x0B05
#define NUM_PIDS 3
static const unsigned short pid_table[] =
{
0x1854,
0x1869,
0x1866
};
/******************************************************************************************\
* *
* DetectAuraCoreControllers *
* *
* Tests the USB address to see if an Asus ROG Aura Core controller exists there *
* *
\******************************************************************************************/
void DetectAuraCoreControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device* dev;
//Look for Asus ROG Aura Core RGB controller
hid_init();
for(int pid_idx = 0; pid_idx < NUM_PIDS; pid_idx++)
{
dev = hid_open(AURA_CORE_VID, pid_table[pid_idx], 0);
if( dev )
{
AuraCoreController* controller = new AuraCoreController(dev);
RGBController_AuraCore* rgb_controller = new RGBController_AuraCore(controller);
rgb_controllers.push_back(rgb_controller);
}
}
}
@@ -0,0 +1,84 @@
/*-----------------------------------------*\
| AuraGPUController.cpp |
| |
| Driver for ASUS Aura RGB on GPUs |
| |
| Jan Rettig (Klapstuhl) 14.02.2020 |
\*-----------------------------------------*/
#include "AuraGPUController.h"
#include <cstring>
AuraGPUController::AuraGPUController(i2c_smbus_interface* bus, aura_gpu_dev_id dev)
{
this->bus = bus;
this->dev = dev;
strcpy(device_name, "ASUS Aura GPU"); // Would be nice to get the actual GPU name. Using this as a placeholder.
}
AuraGPUController::~AuraGPUController()
{
}
std::string AuraGPUController::GetDeviceName()
{
return(device_name);
}
std::string AuraGPUController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
snprintf(addr, 5, "0x%02X", dev);
return_string.append(", address ");
return_string.append(addr);
return(return_string);
}
unsigned char AuraGPUController::GetLEDRed()
{
return(AuraGPURegisterRead(AURA_GPU_REG_RED));
}
unsigned char AuraGPUController::GetLEDGreen()
{
return(AuraGPURegisterRead(AURA_GPU_REG_GREEN));
}
unsigned char AuraGPUController::GetLEDBlue()
{
return(AuraGPURegisterRead(AURA_GPU_REG_BLUE));
}
void AuraGPUController::SetLEDColorsDirect(unsigned char red, unsigned char green, unsigned char blue) // Direct Mode is just Static Mode without applying color changes
{
AuraGPURegisterWrite(AURA_GPU_REG_RED, red);
AuraGPURegisterWrite(AURA_GPU_REG_GREEN, green);
AuraGPURegisterWrite(AURA_GPU_REG_BLUE, blue);
}
void AuraGPUController::SetLEDColorsEffect(unsigned char red, unsigned char green, unsigned char blue)
{
AuraGPURegisterWrite(AURA_GPU_REG_RED, red);
AuraGPURegisterWrite(AURA_GPU_REG_GREEN, green);
AuraGPURegisterWrite(AURA_GPU_REG_BLUE, blue);
AuraGPURegisterWrite(AURA_GPU_REG_APPLY, AURA_GPU_APPLY_VAL);
}
void AuraGPUController::SetMode(unsigned char mode)
{
AuraGPURegisterWrite(AURA_GPU_REG_MODE, mode);
AuraGPURegisterWrite(AURA_GPU_REG_APPLY, AURA_GPU_APPLY_VAL);
}
unsigned char AuraGPUController::AuraGPURegisterRead(unsigned char reg)
{
return(bus->i2c_smbus_read_byte_data(dev, reg));
}
void AuraGPUController::AuraGPURegisterWrite(unsigned char reg, unsigned char val)
{
bus->i2c_smbus_write_byte_data(dev, reg, val);
}
@@ -0,0 +1,64 @@
/*-----------------------------------------*\
| AuraGPUController.h |
| |
| Definitions for ASUS Aura RGB on GPUs |
| |
| Jan Rettig (Klapstuhl) 14.02.2020 |
\*-----------------------------------------*/
#include <string>
#include "i2c_smbus.h"
#pragma once
typedef unsigned char aura_gpu_dev_id;
#define AURA_GPU_MAGIC_VAL 0x1589 /* This magic value is present in all Aura GPU controllers */
#define AURA_GPU_APPLY_VAL 0x01 /* Value for Apply Changes Register */
enum
{
AURA_GPU_REG_RED = 0x04, /* AURA GPU RED Register */
AURA_GPU_REG_GREEN = 0x05, /* AURA GPU GREEN Register */
AURA_GPU_REG_BLUE = 0x06, /* AURA GPU BLUE Register */
AURA_GPU_REG_MODE = 0x07, /* AURA GPU Mode Selection Register */
AURA_GPU_REG_SYNC = 0x0C, /* AURA GPU "Sync" Register */
AURA_GPU_REG_APPLY = 0x0E, /* AURA GPU Apply Chnages Register */
};
enum
{
AURA_GPU_MODE_OFF = 0, /* OFF mode (not a real Mode! Doesn't do anything!) */
AURA_GPU_MODE_STATIC = 1, /* Static color mode */
AURA_GPU_MODE_BREATHING = 2, /* Breathing effect mode */
AURA_GPU_MODE_FLASHING = 3, /* Flashing effect mode */
AURA_GPU_MODE_SPECTRUM_CYCLE = 4, /* Spectrum Cycle mode */
AURA_GPU_MODE_DIRECT = 5, /* Direct mode (not a real Mode! Doesn't do anything!) */
AURA_GPU_NUMBER_MODES
};
class AuraGPUController
{
public:
AuraGPUController(i2c_smbus_interface* bus, aura_gpu_dev_id);
~AuraGPUController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned char GetLEDRed();
unsigned char GetLEDGreen();
unsigned char GetLEDBlue();
void SetLEDColorsDirect(unsigned char red, unsigned char green, unsigned char blue);
void SetLEDColorsEffect(unsigned char red, unsigned char green, unsigned char blue);
void SetMode(unsigned char mode);
unsigned char AuraGPURegisterRead(unsigned char reg);
void AuraGPURegisterWrite(unsigned char reg, unsigned char val);
bool direct = false; // Temporary solution to check if we are in "Direct" mode
private:
char device_name[16];
i2c_smbus_interface * bus;
aura_gpu_dev_id dev;
};
@@ -0,0 +1,94 @@
/*-----------------------------------------*\
| AuraGPUControllerDetect.cpp |
| |
| Driver for ASUS Aura RGB on GPUs |
| |
| Jan Rettig (Klapstuhl) 14.02.2020 |
\*-----------------------------------------*/
#include "AuraGPUController.h"
#include "RGBController.h"
#include "RGBController_AuraGPU.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
/*-------------------------------------------------------------*\
| This list contains the available I2C addresses for Aura GPUs |
\*-------------------------------------------------------------*/
#define AURA_GPU_ADDRESS_COUNT 3
static const unsigned char aura_gpu_addresses[] =
{
0x29,
0x2A,
0x60
};
/******************************************************************************************\
* *
* TestForAuraGPUController *
* *
* Tests the given address to see if an Aura GPU controller exists there. *
* *
\******************************************************************************************/
bool TestForAuraGPUController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
unsigned char aura_gpu_magic_high = bus->i2c_smbus_read_byte_data(address, 0x20); // High Byte of magic (0x15)
unsigned char aura_gpu_magic_low = bus->i2c_smbus_read_byte_data(address, 0x21); // Low Byte of magic (0x89)
if((aura_gpu_magic_high << 8) + aura_gpu_magic_low == AURA_GPU_MAGIC_VAL)
{
pass = true;
}
return(pass);
} /* TestForAuraGPUController() */
/******************************************************************************************\
* *
* DetectAuraGPUControllers *
* *
* Detect Aura GPU controllers on the enumerated I2C busses. *
* *
\******************************************************************************************/
void DetectAuraGPUControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
AuraGPUController* new_aura_gpu;
RGBController_AuraGPU* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// Add Aura-enabled GPU controllers
for (unsigned int address_list_idx = 0; address_list_idx < AURA_GPU_ADDRESS_COUNT; address_list_idx++)
{
if (TestForAuraGPUController(busses[bus], aura_gpu_addresses[address_list_idx]))
{
new_aura_gpu = new AuraGPUController(busses[bus], aura_gpu_addresses[address_list_idx]);
new_controller = new RGBController_AuraGPU(new_aura_gpu);
rgb_controllers.push_back(new_controller);
}
Sleep(1);
}
}
} /* DetectAuraGPUControllers() */
@@ -1,5 +1,5 @@
/*-----------------------------------------*\
| AuraController.cpp |
| AuraSMBusController.cpp |
| |
| Driver for ASUS Aura RGB lighting |
| controller |
@@ -7,10 +7,10 @@
| Adam Honse (CalcProgrammer1) 8/19/2018 |
\*-----------------------------------------*/
#include "AuraController.h"
#include "AuraSMBusController.h"
#include <cstring>
AuraController::AuraController(i2c_smbus_interface* bus, aura_dev_id dev)
AuraSMBusController::AuraSMBusController(i2c_smbus_interface* bus, aura_dev_id dev)
{
this->bus = bus;
this->dev = dev;
@@ -77,17 +77,17 @@ AuraController::AuraController(i2c_smbus_interface* bus, aura_dev_id dev)
}
}
AuraController::~AuraController()
AuraSMBusController::~AuraSMBusController()
{
}
std::string AuraController::GetDeviceName()
std::string AuraSMBusController::GetDeviceName()
{
return(device_name);
}
std::string AuraController::GetDeviceLocation()
std::string AuraSMBusController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
@@ -97,12 +97,12 @@ std::string AuraController::GetDeviceLocation()
return(return_string);
}
unsigned char AuraController::GetChannel(unsigned int led)
unsigned char AuraSMBusController::GetChannel(unsigned int led)
{
return(config_table[channel_cfg + led]);
}
const char * AuraController::GetChannelName(unsigned int led)
const char * AuraSMBusController::GetChannelName(unsigned int led)
{
switch (config_table[channel_cfg + led])
{
@@ -152,12 +152,27 @@ const char * AuraController::GetChannelName(unsigned int led)
}
}
unsigned int AuraController::GetLEDCount()
unsigned int AuraSMBusController::GetLEDCount()
{
return(led_count);
}
void AuraController::SetAllColorsDirect(unsigned char red, unsigned char green, unsigned char blue)
unsigned char AuraSMBusController::GetLEDRed(unsigned int led)
{
return(AuraRegisterRead(direct_reg + ( 3 * led )));
}
unsigned char AuraSMBusController::GetLEDGreen(unsigned int led)
{
return(AuraRegisterRead(direct_reg + ( 3 * led ) + 2));
}
unsigned char AuraSMBusController::GetLEDBlue(unsigned int led)
{
return(AuraRegisterRead(direct_reg + ( 3 * led ) + 1));
}
void AuraSMBusController::SetAllColorsDirect(unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char* colors = new unsigned char[led_count * 3];
@@ -173,7 +188,7 @@ void AuraController::SetAllColorsDirect(unsigned char red, unsigned char green,
delete colors;
}
void AuraController::SetAllColorsEffect(unsigned char red, unsigned char green, unsigned char blue)
void AuraSMBusController::SetAllColorsEffect(unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char* colors = new unsigned char[led_count * 3];
@@ -191,20 +206,20 @@ void AuraController::SetAllColorsEffect(unsigned char red, unsigned char green,
delete[] colors;
}
void AuraController::SetDirect(unsigned char direct)
void AuraSMBusController::SetDirect(unsigned char direct)
{
AuraRegisterWrite(AURA_REG_DIRECT, direct);
AuraRegisterWrite(AURA_REG_APPLY, AURA_APPLY_VAL);
}
void AuraController::SetLEDColorDirect(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void AuraSMBusController::SetLEDColorDirect(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char colors[3] = { red, blue, green };
AuraRegisterWriteBlock(direct_reg + ( 3 * led ), colors, 3);
}
void AuraController::SetLEDColorEffect(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void AuraSMBusController::SetLEDColorEffect(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char colors[3] = { red, blue, green };
@@ -213,13 +228,13 @@ void AuraController::SetLEDColorEffect(unsigned int led, unsigned char red, unsi
AuraRegisterWrite(AURA_REG_APPLY, AURA_APPLY_VAL);
}
void AuraController::SetMode(unsigned char mode)
void AuraSMBusController::SetMode(unsigned char mode)
{
AuraRegisterWrite(AURA_REG_MODE, mode);
AuraRegisterWrite(AURA_REG_APPLY, AURA_APPLY_VAL);
}
void AuraController::AuraUpdateDeviceName()
void AuraSMBusController::AuraUpdateDeviceName()
{
for (int i = 0; i < 16; i++)
{
@@ -227,7 +242,7 @@ void AuraController::AuraUpdateDeviceName()
}
}
unsigned char AuraController::AuraRegisterRead(aura_register reg)
unsigned char AuraSMBusController::AuraRegisterRead(aura_register reg)
{
//Write Aura register
bus->i2c_smbus_write_word_data(dev, 0x00, ((reg << 8) & 0xFF00) | ((reg >> 8) & 0x00FF));
@@ -237,7 +252,7 @@ unsigned char AuraController::AuraRegisterRead(aura_register reg)
}
void AuraController::AuraRegisterWrite(aura_register reg, unsigned char val)
void AuraSMBusController::AuraRegisterWrite(aura_register reg, unsigned char val)
{
//Write Aura register
bus->i2c_smbus_write_word_data(dev, 0x00, ((reg << 8) & 0xFF00) | ((reg >> 8) & 0x00FF));
@@ -247,7 +262,7 @@ void AuraController::AuraRegisterWrite(aura_register reg, unsigned char val)
}
void AuraController::AuraRegisterWriteBlock(aura_register reg, unsigned char * data, unsigned char sz)
void AuraSMBusController::AuraRegisterWriteBlock(aura_register reg, unsigned char * data, unsigned char sz)
{
//Write Aura register
bus->i2c_smbus_write_word_data(dev, 0x00, ((reg << 8) & 0xFF00) | ((reg >> 8) & 0x00FF));
@@ -1,5 +1,5 @@
/*-----------------------------------------*\
| AuraController.h |
| AuraSMBusController.h |
| |
| Definitions and types for ASUS Aura RGB |
| lighting controller |
@@ -88,17 +88,20 @@ enum
AURA_CONFIG_CHANNEL_V2 = 0x1B, /* LED Channel V2 configuration offset */
};
class AuraController
class AuraSMBusController
{
public:
AuraController(i2c_smbus_interface* bus, aura_dev_id dev);
~AuraController();
AuraSMBusController(i2c_smbus_interface* bus, aura_dev_id dev);
~AuraSMBusController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned char GetChannel(unsigned int led);
const char* GetChannelName(unsigned int led);
unsigned int GetLEDCount();
unsigned char GetLEDRed(unsigned int led);
unsigned char GetLEDGreen(unsigned int led);
unsigned char GetLEDBlue(unsigned int led);
void SetAllColorsDirect(unsigned char red, unsigned char green, unsigned char blue);
void SetAllColorsEffect(unsigned char red, unsigned char green, unsigned char blue);
void SetDirect(unsigned char direct);
@@ -1,6 +1,6 @@
#include "AuraController.h"
#include "AuraSMBusController.h"
#include "RGBController.h"
#include "RGBController_Aura.h"
#include "RGBController_AuraSMBus.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
@@ -20,12 +20,13 @@ static void Sleep(unsigned int milliseconds)
/*----------------------------------------------------------------------*\
| This list contains the available SMBus addresses for mapping Aura RAM |
\*----------------------------------------------------------------------*/
#define AURA_RAM_ADDRESS_COUNT 17
#define AURA_RAM_ADDRESS_COUNT 22
static const unsigned char aura_ram_addresses[] =
{
0x70,
0x71,
0x72,
0x73,
0x74,
0x75,
@@ -40,29 +41,32 @@ static const unsigned char aura_ram_addresses[] =
0x7F,
0x4F,
0x66,
0x67
0x67,
0x39,
0x3B,
0x3C,
0x3D
};
/*---------------------------------------------------------------------------------*\
| This list contains the available SMBus addresses for mapping Aura motherboards |
\*---------------------------------------------------------------------------------*/
#define AURA_MOBO_ADDRESS_COUNT 4
#define AURA_MOBO_ADDRESS_COUNT 3
static const unsigned char aura_mobo_addresses[] =
{
0x40,
0x4E,
0x4F,
0x66
0x4F
};
/******************************************************************************************\
* *
* AuraRegisterWrite *
* *
* A standalone version of the AuraController::AuraRegisterWrite function for access *
* to Aura devices without instancing the AuraController class or reading the config *
* table from the device. *
* A standalone version of the AuraSMBusController::AuraRegisterWrite function for *
* access to Aura devices without instancing the AuraSMBusController class or reading *
* the config table from the device. *
* *
\******************************************************************************************/
@@ -77,7 +81,7 @@ void AuraRegisterWrite(i2c_smbus_interface* bus, aura_dev_id dev, aura_register
/******************************************************************************************\
* *
* TestForAuraController *
* TestForAuraSMBusController *
* *
* Tests the given address to see if an Aura controller exists there. First does a *
* quick write to test for a response, and if so does a simple read at 0xA0 to test *
@@ -85,7 +89,7 @@ void AuraRegisterWrite(i2c_smbus_interface* bus, aura_dev_id dev, aura_register
* *
\******************************************************************************************/
bool TestForAuraController(i2c_smbus_interface* bus, unsigned char address)
bool TestForAuraSMBusController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
@@ -108,11 +112,11 @@ bool TestForAuraController(i2c_smbus_interface* bus, unsigned char address)
return(pass);
} /* TestForAuraController() */
} /* TestForAuraSMBusController() */
/******************************************************************************************\
* *
* DetectAuraControllers *
* DetectAuraSMBusControllers *
* *
* Detect Aura controllers on the enumerated I2C busses. Searches for Aura-enabled *
* RAM at 0x77 and tries to initialize their slot addresses, then searches for them *
@@ -124,14 +128,14 @@ bool TestForAuraController(i2c_smbus_interface* bus, unsigned char address)
* *
\******************************************************************************************/
void DetectAuraControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
void DetectAuraSMBusControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
AuraController* new_aura;
RGBController_Aura* new_controller;
AuraSMBusController* new_aura;
RGBController_AuraSMBus* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
int address_list_idx = 0;
int address_list_idx = -1;
// Remap Aura-enabled RAM modules on 0x77
for (unsigned int slot = 0; slot < 8; slot++)
@@ -145,10 +149,11 @@ void DetectAuraControllers(std::vector<i2c_smbus_interface*> &busses, std::vecto
do
{
address_list_idx++;
if(address_list_idx < AURA_RAM_ADDRESS_COUNT)
{
res = busses[bus]->i2c_smbus_write_quick(aura_ram_addresses[address_list_idx], I2C_SMBUS_WRITE);
address_list_idx++;
}
else
{
@@ -156,17 +161,20 @@ void DetectAuraControllers(std::vector<i2c_smbus_interface*> &busses, std::vecto
}
} while (res >= 0);
AuraRegisterWrite(busses[bus], 0x77, AURA_REG_SLOT_INDEX, slot);
AuraRegisterWrite(busses[bus], 0x77, AURA_REG_I2C_ADDRESS, (aura_ram_addresses[address_list_idx] << 1));
if(address_list_idx < AURA_RAM_ADDRESS_COUNT)
{
AuraRegisterWrite(busses[bus], 0x77, AURA_REG_SLOT_INDEX, slot);
AuraRegisterWrite(busses[bus], 0x77, AURA_REG_I2C_ADDRESS, (aura_ram_addresses[address_list_idx] << 1));
}
}
// Add Aura-enabled controllers at their remapped addresses
for (unsigned int address_list_idx = 0; address_list_idx < AURA_RAM_ADDRESS_COUNT; address_list_idx++)
{
if (TestForAuraController(busses[bus], aura_ram_addresses[address_list_idx]))
if (TestForAuraSMBusController(busses[bus], aura_ram_addresses[address_list_idx]))
{
new_aura = new AuraController(busses[bus], aura_ram_addresses[address_list_idx]);
new_controller = new RGBController_Aura(new_aura);
new_aura = new AuraSMBusController(busses[bus], aura_ram_addresses[address_list_idx]);
new_controller = new RGBController_AuraSMBus(new_aura);
rgb_controllers.push_back(new_controller);
}
@@ -176,10 +184,10 @@ void DetectAuraControllers(std::vector<i2c_smbus_interface*> &busses, std::vecto
// Add Aura-enabled motherboard controllers
for (unsigned int address_list_idx = 0; address_list_idx < AURA_MOBO_ADDRESS_COUNT; address_list_idx++)
{
if (TestForAuraController(busses[bus], aura_mobo_addresses[address_list_idx]))
if (TestForAuraSMBusController(busses[bus], aura_mobo_addresses[address_list_idx]))
{
new_aura = new AuraController(busses[bus], aura_mobo_addresses[address_list_idx]);
new_controller = new RGBController_Aura(new_aura);
new_aura = new AuraSMBusController(busses[bus], aura_mobo_addresses[address_list_idx]);
new_controller = new RGBController_AuraSMBus(new_aura);
rgb_controllers.push_back(new_controller);
}
@@ -187,4 +195,4 @@ void DetectAuraControllers(std::vector<i2c_smbus_interface*> &busses, std::vecto
}
}
} /* DetectAuraControllers() */
} /* DetectAuraSMBusControllers() */
@@ -0,0 +1,173 @@
/*-----------------------------------------*\
| AuraAddressableController.cpp |
| |
| Driver for ASUS Aura RGB Addressable |
| lighting controller |
| |
| Adam Honse (CalcProgrammer1) 1/18/2020 |
\*-----------------------------------------*/
#include "AuraAddressableController.h"
#include <cstring>
AuraAddressableController::AuraAddressableController(hid_device* dev_handle) : AuraUSBController(dev_handle)
{
channel_count = config_table[2];
}
AuraAddressableController::~AuraAddressableController()
{
}
void AuraAddressableController::SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors)
{
unsigned char led_data[60];
unsigned int leds_sent = 0;
while(leds_sent < num_colors)
{
unsigned int leds_to_send = 20;
if((num_colors - leds_sent) < leds_to_send)
{
leds_to_send = num_colors - leds_sent;
}
for(int led_idx = 0; led_idx < leds_to_send; led_idx++)
{
led_data[(led_idx * 3) + 0] = RGBGetRValue(colors[led_idx + leds_sent]);
led_data[(led_idx * 3) + 1] = RGBGetGValue(colors[led_idx + leds_sent]);
led_data[(led_idx * 3) + 2] = RGBGetBValue(colors[led_idx + leds_sent]);
}
SendDirect
(
channel,
leds_sent,
leds_to_send,
led_data
);
leds_sent += leds_to_send;
}
SendDirectApply(channel);
}
void AuraAddressableController::SetMode
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
)
{
SendEffect
(
channel,
mode,
red,
grn,
blu
);
}
void AuraAddressableController::SendEffect
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_ADDRESSABLE_CONTROL_MODE_EFFECT;
usb_buf[0x02] = channel;
usb_buf[0x03] = 0x00;
usb_buf[0x04] = mode;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
usb_buf[0x05] = red;
usb_buf[0x06] = grn;
usb_buf[0x07] = blu;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
}
void AuraAddressableController::SendDirect
(
unsigned char device,
unsigned char start_led,
unsigned char led_count,
unsigned char* led_data
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_ADDRESSABLE_CONTROL_MODE_DIRECT;
usb_buf[0x02] = device;
usb_buf[0x03] = start_led;
usb_buf[0x04] = led_count;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x05], led_data, led_count * 3);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
}
void AuraAddressableController::SendDirectApply
(
unsigned char channel
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_ADDRESSABLE_CONTROL_MODE_DIRECT;
usb_buf[0x02] = 0x80 | channel;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
}
@@ -0,0 +1,69 @@
/*-----------------------------------------*\
| AuraAddressableController.h |
| |
| Definitions and types for ASUS Aura |
| Addressable RGB lighting controller |
| |
| Adam Honse (CalcProgrammer1) 1/18/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include "AuraUSBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
AURA_ADDRESSABLE_CONTROL_MODE_EFFECT = 0x3B, /* Effect control mode */
AURA_ADDRESSABLE_CONTROL_MODE_DIRECT = 0x40, /* Direct control mode */
};
class AuraAddressableController : public AuraUSBController
{
public:
AuraAddressableController(hid_device* dev_handle);
~AuraAddressableController();
void SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
);
void SetMode
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
);
private:
void SendEffect
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
);
void SendDirect
(
unsigned char device,
unsigned char start_led,
unsigned char led_count,
unsigned char* led_data
);
void SendDirectApply
(
unsigned char channel
);
};
@@ -0,0 +1,176 @@
/*-----------------------------------------*\
| AuraMainboardController.cpp |
| |
| Driver for ASUS Aura RGB USB mainboard |
| lighting controller |
| |
| Martin Hartl (inlart) 4/25/2020 |
\*-----------------------------------------*/
#include "AuraMainboardController.h"
#include <cstring>
AuraMainboardController::AuraMainboardController(hid_device* dev_handle) : AuraUSBController(dev_handle), mode(AURA_MODE_DIRECT)
{
channel_count = 5;
}
AuraMainboardController::~AuraMainboardController()
{
}
void AuraMainboardController::SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors)
{
unsigned char led_data[60];
unsigned int leds_sent = 0;
SendEffect(channel, mode);
while(leds_sent < num_colors)
{
unsigned int leds_to_send = 20;
if((num_colors - leds_sent) < leds_to_send)
{
leds_to_send = num_colors - leds_sent;
}
for(int led_idx = 0; led_idx < leds_to_send; led_idx++)
{
led_data[(led_idx * 3) + 0] = RGBGetRValue(colors[led_idx + leds_sent]);
led_data[(led_idx * 3) + 1] = RGBGetGValue(colors[led_idx + leds_sent]);
led_data[(led_idx * 3) + 2] = RGBGetBValue(colors[led_idx + leds_sent]);
}
SendDirect
(
channel,
leds_sent,
leds_to_send,
led_data
);
leds_sent += leds_to_send;
}
SendCommit();
}
void AuraMainboardController::SetMode
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
)
{
this->mode = mode;
unsigned char led_data[3];
led_data[0] = red;
led_data[1] = grn;
led_data[2] = blu;
SendEffect
(
channel,
mode
);
SendDirect
(
channel,
0,
1,
led_data
);
SendCommit();
}
void AuraMainboardController::SendEffect
(
unsigned char channel,
unsigned char mode
)
{
unsigned char usb_buf[65];
if(mode == AURA_MODE_DIRECT) {
mode = AURA_MODE_STATIC;
}
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_MAINBOARD_CONTROL_MODE_EFFECT;
usb_buf[0x02] = 0x00;
usb_buf[0x03] = 0x00;
usb_buf[0x04] = channel;
usb_buf[0x05] = mode;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
}
void AuraMainboardController::SendDirect
(
unsigned char device,
unsigned char start_led,
unsigned char led_count,
unsigned char* led_data
)
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_MAINBOARD_CONTROL_MODE_DIRECT;
usb_buf[0x02] = start_led;
usb_buf[0x03] = 0xff;
usb_buf[0x04] = 0x00;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x05], led_data, led_count * 3);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
}
void AuraMainboardController::SendCommit()
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up message packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_MAINBOARD_CONTROL_MODE_COMMIT;
usb_buf[0x02] = 0x55;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
}
@@ -0,0 +1,65 @@
/*-----------------------------------------*\
| AuraMainboardController.h |
| |
| Definitions and types for ASUS Aura |
| USB Mainboard RGB lighting controller |
| |
| Martin Hartl (inlart) 4/25/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include "AuraUSBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
AURA_MAINBOARD_CONTROL_MODE_EFFECT = 0x35, /* Effect control mode */
AURA_MAINBOARD_CONTROL_MODE_DIRECT = 0x36, /* Direct control mode */
AURA_MAINBOARD_CONTROL_MODE_COMMIT = 0x3F, /* Direct control mode */
};
class AuraMainboardController : public AuraUSBController
{
public:
AuraMainboardController(hid_device* dev_handle);
~AuraMainboardController();
void SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
);
void SetMode
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
);
private:
unsigned int mode;
void SendEffect
(
unsigned char channel,
unsigned char mode
);
void SendDirect
(
unsigned char device,
unsigned char start_led,
unsigned char led_count,
unsigned char* led_data
);
void SendCommit();
};
@@ -0,0 +1,104 @@
/*-----------------------------------------*\
| AuraUSBController.cpp |
| |
| Driver for ASUS Aura RGB USB |
| lighting controller |
| |
| Martin Hartl (inlart) 4/25/2020 |
\*-----------------------------------------*/
#include "AuraUSBController.h"
#include <cstring>
AuraUSBController::AuraUSBController(hid_device* dev_handle)
{
dev = dev_handle;
GetFirmwareVersion();
GetConfigTable();
}
AuraUSBController::~AuraUSBController()
{
}
unsigned int AuraUSBController::GetChannelCount()
{
return( channel_count );
}
std::string AuraUSBController::GetDeviceName()
{
return(device_name);
}
void AuraUSBController::GetConfigTable()
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up config table request packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_REQUEST_CONFIG_TABLE;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 65);
/*-----------------------------------------------------*\
| Copy the firmware string if the reply ID is correct |
\*-----------------------------------------------------*/
if(usb_buf[1] == 0x30)
{
memcpy(config_table, &usb_buf[4], 60);
for(int i = 0; i < 60; i+=6)
{
printf("%02X %02X %02X %02X %02X %02X\r\n", config_table[i + 0],
config_table[i + 1],
config_table[i + 2],
config_table[i + 3],
config_table[i + 4],
config_table[i + 5]);
}
}
}
void AuraUSBController::GetFirmwareVersion()
{
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up firmware version request packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xEC;
usb_buf[0x01] = AURA_REQUEST_FIRMWARE_VERSION;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, usb_buf, 65);
hid_read(dev, usb_buf, 65);
/*-----------------------------------------------------*\
| Copy the firmware string if the reply ID is correct |
\*-----------------------------------------------------*/
if(usb_buf[1] == 0x02)
{
memcpy(device_name, &usb_buf[2], 16);
}
}
@@ -0,0 +1,81 @@
/*-----------------------------------------*\
| AuraUSBController.h |
| |
| Definitions and types for ASUS Aura |
| USB RGB lighting controller |
| |
| Martin Hartl (inlart) 4/25/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
AURA_MODE_OFF = 0, /* OFF mode */
AURA_MODE_STATIC = 1, /* Static color mode */
AURA_MODE_BREATHING = 2, /* Breathing effect mode */
AURA_MODE_FLASHING = 3, /* Flashing effect mode */
AURA_MODE_SPECTRUM_CYCLE = 4, /* Spectrum Cycle mode */
AURA_MODE_RAINBOW = 5, /* Rainbow effect mode */
AURA_MODE_SPECTRUM_CYCLE_BREATHING = 6, /* Rainbow Breathing effect mode */
AURA_MODE_CHASE_FADE = 7, /* Chase with Fade effect mode */
AURA_MODE_SPECTRUM_CYCLE_CHASE_FADE = 8, /* Chase with Fade, Rainbow effect mode */
AURA_MODE_CHASE = 9, /* Chase effect mode */
AURA_MODE_SPECTRUM_CYCLE_CHASE = 10, /* Chase with Rainbow effect mode */
AURA_MODE_SPECTRUM_CYCLE_WAVE = 11, /* Wave effect mode */
AURA_MODE_CHASE_RAINBOW_PULSE = 12, /* Chase with Rainbow Pulse effect mode*/
AURA_MODE_RANDOM_FLICKER = 13, /* Random flicker effect mode */
AURA_MODE_MUSIC = 14, /* Music effect mode */
AURA_MODE_DIRECT = 0xFF, /* Direct control mode */
};
enum
{
AURA_REQUEST_FIRMWARE_VERSION = 0x82, /* Request firmware string */
AURA_REQUEST_CONFIG_TABLE = 0xB0, /* Request configuration table */
};
class AuraUSBController
{
public:
AuraUSBController(hid_device* dev_handle);
virtual ~AuraUSBController();
unsigned int GetChannelCount();
std::string GetDeviceName();
virtual void SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
) = 0;
virtual void SetMode
(
unsigned char channel,
unsigned char mode,
unsigned char red,
unsigned char grn,
unsigned char blu
) = 0;
protected:
hid_device* dev;
unsigned int channel_count;
unsigned char config_table[60];
private:
char device_name[16];
unsigned int led_count;
void GetConfigTable();
void GetFirmwareVersion();
};
@@ -0,0 +1,68 @@
#include "AuraAddressableController.h"
#include "AuraMainboardController.h"
#include "RGBController.h"
#include "RGBController_AuraUSB.h"
#include <vector>
#include <hidapi/hidapi.h>
#define AURA_USB_VID 0x0B05
#define NUM_ADDRESSABLE_PIDS 4
static const unsigned short addressable_pid_table[] =
{
0x1867,
0x1872,
0x1889,
0x18A3
};
#define NUM_MAINBOARD_PIDS 1
static const unsigned short mainboard_pid_table[] =
{
0x18f3
};
/******************************************************************************************\
* *
* DetectAuraUSBControllers *
* *
* Tests the USB address to see if an Asus Aura USB RGB header controller *
* exists there. *
* *
\******************************************************************************************/
void DetectAuraUSBControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device* dev;
//Look for Asus Aura addressable RGB header controller
hid_init();
for(int pid_idx = 0; pid_idx < NUM_ADDRESSABLE_PIDS; pid_idx++)
{
dev = hid_open(AURA_USB_VID, addressable_pid_table[pid_idx], 0);
if( dev )
{
AuraAddressableController* controller = new AuraAddressableController(dev);
RGBController_AuraUSB* rgb_controller = new RGBController_AuraUSB(controller);
rgb_controllers.push_back(rgb_controller);
}
}
for(int pid_idx = 0; pid_idx < NUM_MAINBOARD_PIDS; pid_idx++)
{
dev = hid_open(AURA_USB_VID, mainboard_pid_table[pid_idx], 0);
if( dev )
{
AuraMainboardController* controller = new AuraMainboardController(dev);
RGBController_AuraUSB* rgb_controller = new RGBController_AuraUSB(controller);
rgb_controllers.push_back(rgb_controller);
}
}
}
@@ -0,0 +1,100 @@
/*-------------------------------------------------------------------*\
| CMMP750Controller.cpp |
| |
| Driver for Coolermaster MP750 mousepad |
| |
| Chris M (Dr_No) 16th Apr 2020 |
| |
\*-------------------------------------------------------------------*/
#include "CMMP750Controller.h"
#include <cstring>
#include <stdio.h>
#include <stdlib.h>
CMMP750Controller::CMMP750Controller(libusb_device_handle* dev_handle, unsigned int _inAddr, unsigned int _outAddr, int _interface)
{
dev = dev_handle;
inAddr = _inAddr;
outAddr = _outAddr;
interface = _interface;
libusb_device* device = libusb_get_device(dev);
int bus = libusb_get_bus_number(device);
int bus_addr = libusb_get_device_address(device);
int port = libusb_get_port_number(device);
location = "Bus: " + std::to_string(bus) + " Addr: " + std::to_string(bus_addr) + " Port: " + std::to_string(port);
strcpy(device_name, "Cooler Master MP750");
current_mode = MP750_MODE_STATIC;
current_speed = MP750_SPEED_NORMAL;
}
CMMP750Controller::~CMMP750Controller()
{
libusb_release_interface(dev, interface);
libusb_attach_kernel_driver(dev, interface);
}
char* CMMP750Controller::GetDeviceName()
{
return device_name;
}
char* CMMP750Controller::GetSerial()
{
return serial;
}
std::string CMMP750Controller::GetLocation()
{
return location;
}
void CMMP750Controller::SetMode(unsigned char mode, unsigned char speed)
{
current_mode = mode;
current_speed = speed;
SendUpdate();
}
void CMMP750Controller::SetColor(unsigned char red, unsigned char green, unsigned char blue)
{
current_red = red;
current_green = green;
current_blue = blue;
SendUpdate();
}
void CMMP750Controller::SendUpdate()
{
int actual = 0;
unsigned char buffer[0x40] = { 0x00 };
int buffer_size = (sizeof(buffer) / sizeof(buffer[0]));
for(int i = 0; i < CM_COLOUR_MODE_DATA_SIZE; i++)
{
buffer[i] = colour_mode_data[current_mode][i];
}
if(current_mode > MP750_MODE_BREATHING)
{
//If the mode is random colours set SPEED at BYTE2
buffer[CM_RED_BYTE] = speed_mode_data[current_mode][current_speed];
}
else
{
//Otherwise SPEED is BYTE5
buffer[CM_RED_BYTE] = current_red;
buffer[CM_GREEN_BYTE] = current_green;
buffer[CM_BLUE_BYTE] = current_blue;
buffer[CM_SPEED_BYTE] = speed_mode_data[current_mode][current_speed];
}
//Nothing will be done with the "actual" transfer length
libusb_interrupt_transfer(dev, outAddr, buffer, buffer_size, nullptr, CM_INTERRUPT_TIMEOUT);
}
@@ -0,0 +1,105 @@
/*-------------------------------------------------------------------*\
| CMMP750Controller.h |
| |
| Driver for Coolermaster MP750 mousepad |
| |
| Chris M (Dr_No) 16th Apr 2020 |
| |
| Simple RGB device with 5 modes |
| BYTE0 = Mode (0x01 thru 0x05 |
| BYTE1 = ?? Must be set to 0x04 for colour modes otherwise ignored |
| BYTE2 = Colour Modes: RED else Cycle SPEED |
| BYTE3 = Colour Modes: GREEN else ignored |
| BYTE4 = Colour Modes: BLUE else ignored |
| BYTE5 = Colour Modes: SPEED else ignored |
\*-------------------------------------------------------------------*/
#include <string>
#include <array>
#include <libusb-1.0/libusb.h>
#pragma once
#define CM_COLOUR_MODE_DATA_SIZE (sizeof(colour_mode_data) / sizeof(colour_mode_data[0]))
#define CM_INTERRUPT_TIMEOUT 250
enum
{
CM_MODE_BYTE = 0,
CM_RED_BYTE = 2,
CM_GREEN_BYTE = 3,
CM_BLUE_BYTE = 4,
CM_SPEED_BYTE = 5
};
enum
{
MP750_MODE_STATIC = 0x00, //Static Mode
MP750_MODE_BLINK = 0x01, //Blinking Mode
MP750_MODE_BREATHING = 0x02, //Breathing Mode
MP750_MODE_COLOR_CYCLE = 0x03, //Color Cycle Mode
MP750_MODE_BREATH_CYCLE = 0x04 //Breathing Cycle Mode
};
static unsigned char colour_mode_data[][6] =
{
{ 0x01, 0x04, 0xFF, 0x00, 0xFF, 0x00 }, /* Static */
{ 0x02, 0x04, 0xFF, 0x00, 0xFF, 0x80 }, /* Blinking */
{ 0x03, 0x04, 0xFF, 0x00, 0xFF, 0x80 }, /* Breathing */
{ 0x04, 0x04, 0x80, 0x00, 0x00, 0x00 }, /* Colour Cycle */
{ 0x05, 0x04, 0x80, 0x00, 0x00, 0x00 } /* Colour Breath */
};
static unsigned char speed_mode_data[][9] =
{
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },/* Static */
{ 0x00, 0x20, 0x40, 0x60, 0x80, 0xA0, 0xC0, 0xE0, 0xFF },/* Blinking */
{ 0x00, 0x20, 0x40, 0x60, 0x80, 0xA0, 0xC0, 0xE0, 0xFF },/* Breathing */
{ 0x00, 0x20, 0x40, 0x60, 0x80, 0xA0, 0xC0, 0xE0, 0xFF },/* Colour Cycle */
{ 0x00, 0x20, 0x40, 0x60, 0x80, 0xA0, 0xC0, 0xE0, 0xFF } /* Colour Breath */
};
enum
{
MP750_SPEED_SLOWEST = 0x00, /* Slowest speed */
MP750_SPEED_SLOWER = 0x01, /* Slower speed */
MP750_SPEED_SLOW = 0x02, /* Slow speed */
MP750_SPEED_SLOWISH = 0x03, /* Slowish speed */
MP750_SPEED_NORMAL = 0x04, /* Normal speed */
MP750_SPEED_FASTISH = 0x05, /* Fastish speed */
MP750_SPEED_FAST = 0x06, /* Fast speed */
MP750_SPEED_FASTER = 0x07, /* Faster speed */
MP750_SPEED_FASTEST = 0x08, /* Fastest speed */
};
class CMMP750Controller
{
public:
CMMP750Controller(libusb_device_handle *dev_handle, unsigned int _inAddr, unsigned int _outAddr, int _interface);
~CMMP750Controller();
char* GetDeviceName();
char* GetSerial();
std::string GetLocation();
void SetMode(unsigned char mode, unsigned char speed);
void SetColor(unsigned char red, unsigned char green, unsigned char blue);
private:
char device_name[32];
char serial[32];
std::string location;
libusb_device_handle* dev;
unsigned char inAddr;
unsigned char outAddr;
int interface;
unsigned char current_mode;
unsigned char current_speed;
unsigned char current_red;
unsigned char current_green;
unsigned char current_blue;
void SendUpdate();
};
@@ -0,0 +1,57 @@
#include "CMMP750Controller.h"
#include "RGBController.h"
#include "RGBController_CMMP750Controller.h"
#include <vector>
#include <libusb-1.0/libusb.h>
#define COOLERMASTER_VID 0x2516
#define COOLERMASTER_NUM_DEVICES (sizeof(cm_pids) / sizeof(cm_pids[ 0 ]))
enum
{
CM_PID = 0,
CM_INADDR = 1,
CM_OUTADDR = 2,
CM_INTERFACE = 3
};
static const unsigned int cm_pids[][4] =
{ //PID, inAddr, outAddr, interface
{ 0x0109, 0x82, 0x03, 0x00 } //Coolermaster MP750
};
/******************************************************************************************\
* *
* DetectCoolerMasterControllers *
* *
* Tests the USB address to see if any CoolerMaster controllers exists there. *
* *
\******************************************************************************************/
void DetectCoolerMasterControllers(std::vector<RGBController*>& rgb_controllers)
{
libusb_context * context;
libusb_init(&context);
for(int cm_pid_idx = 0; cm_pid_idx < COOLERMASTER_NUM_DEVICES; cm_pid_idx++)
{
//Look for the passed in cm_pids
libusb_device_handle * dev = libusb_open_device_with_vid_pid(context, COOLERMASTER_VID, cm_pids[cm_pid_idx][CM_PID]);
if(dev)
{
int status = libusb_detach_kernel_driver(dev, cm_pids[cm_pid_idx][CM_INTERFACE]);
status = libusb_claim_interface(dev, cm_pids[cm_pid_idx][CM_INTERFACE]);
if(status == 0)
{
// Success: Device has been claimed
CMMP750Controller* controller = new CMMP750Controller(dev, cm_pids[cm_pid_idx][CM_INADDR], cm_pids[cm_pid_idx][CM_OUTADDR], cm_pids[cm_pid_idx][CM_INTERFACE]);
RGBController_CMMP750Controller* rgb_controller = new RGBController_CMMP750Controller(controller);
rgb_controllers.push_back(rgb_controller);
}
}
}
}
@@ -0,0 +1,463 @@
/*---------------------------------------------------------*\
| Processing Code for Corsair Lighting Node Pro |
| |
| Adam Honse ([email protected]), 1/12/2020 |
\*---------------------------------------------------------*/
#include "CorsairLightingNodeController.h"
#include <fstream>
#include <iostream>
#include <string>
#include <cstring>
//Include thread libraries for Windows or Linux
#ifdef WIN32
#include <process.h>
#else
#include "pthread.h"
#include "unistd.h"
#endif
//Thread functions have different types in Windows and Linux
#ifdef WIN32
#define THREAD static void
#define THREADRETURN
#else
#define THREAD static void*
#define THREADRETURN return(NULL);
#endif
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
THREAD keepalive_thread(void *param)
{
CorsairLightingNodeController* corsair = static_cast<CorsairLightingNodeController*>(param);
corsair->KeepaliveThread();
THREADRETURN
}
CorsairLightingNodeController::CorsairLightingNodeController(libusb_device_handle* dev_handle, unsigned int dev_endpoint)
{
dev = dev_handle;
endpoint = dev_endpoint;
SendFirmwareRequest();
/*-----------------------------------------------------*\
| The Corsair Lighting Node Pro requires a packet within|
| 20 seconds of sending the lighting change in order |
| to not revert back into rainbow mode. Start a thread |
| to continuously send a keepalive packet every 5s |
\*-----------------------------------------------------*/
#ifdef WIN32
_beginthread(keepalive_thread, 0, this);
#else
pthread_t thread;
pthread_create(&thread, NULL, &keepalive_thread, this);
#endif
}
CorsairLightingNodeController::~CorsairLightingNodeController()
{
}
void CorsairLightingNodeController::KeepaliveThread()
{
while(1)
{
SendCommit();
Sleep(5000);
}
}
std::string CorsairLightingNodeController::GetFirmwareString()
{
return(firmware_version);
}
void CorsairLightingNodeController::SetChannelEffect(unsigned char channel,
unsigned char num_leds,
unsigned char mode,
unsigned char speed,
unsigned char direction,
bool random,
unsigned char red1,
unsigned char grn1,
unsigned char blu1,
unsigned char red2,
unsigned char grn2,
unsigned char blu2,
unsigned char red3,
unsigned char grn3,
unsigned char blu3
)
{
/*-----------------------------------------------------*\
| Send Reset packet |
\*-----------------------------------------------------*/
SendReset(channel);
/*-----------------------------------------------------*\
| Send Begin packet |
\*-----------------------------------------------------*/
SendBegin(channel);
/*-----------------------------------------------------*\
| Set Port State packet |
\*-----------------------------------------------------*/
SendPortState(channel, CORSAIR_LIGHTING_NODE_PORT_STATE_HARDWARE);
/*-----------------------------------------------------*\
| Set Effect Configuration packet |
\*-----------------------------------------------------*/
SendEffectConfig
(
channel,
0,
num_leds,
mode,
speed,
direction,
random,
red1,
grn1,
blu1,
red2,
grn2,
blu2,
red3,
grn3,
blu3,
0,
0,
0
);
/*-----------------------------------------------------*\
| Send Commit packet |
\*-----------------------------------------------------*/
SendCommit();
}
void CorsairLightingNodeController::SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors)
{
unsigned char red_color_data[50];
unsigned char grn_color_data[50];
unsigned char blu_color_data[50];
unsigned char pkt_offset = 0;
unsigned char pkt_size = 0;
unsigned int colors_remaining = num_colors;
/*-----------------------------------------------------*\
| Send Port State packet |
\*-----------------------------------------------------*/
SendPortState(channel, CORSAIR_LIGHTING_NODE_PORT_STATE_SOFTWARE);
/*-----------------------------------------------------*\
| Loop through colors and send 50 at a time |
\*-----------------------------------------------------*/
while(colors_remaining > 0)
{
if(colors_remaining < 50)
{
pkt_size = colors_remaining;
}
else
{
pkt_size = 50;
}
for(int color_idx = 0; color_idx < pkt_size; color_idx++)
{
red_color_data[color_idx] = RGBGetRValue(colors[pkt_offset + color_idx]);
grn_color_data[color_idx] = RGBGetGValue(colors[pkt_offset + color_idx]);
blu_color_data[color_idx] = RGBGetBValue(colors[pkt_offset + color_idx]);
}
SendDirect(channel, pkt_offset, pkt_size, CORSAIR_LIGHTING_NODE_DIRECT_CHANNEL_RED, red_color_data);
SendDirect(channel, pkt_offset, pkt_size, CORSAIR_LIGHTING_NODE_DIRECT_CHANNEL_GREEN, grn_color_data);
SendDirect(channel, pkt_offset, pkt_size, CORSAIR_LIGHTING_NODE_DIRECT_CHANNEL_BLUE, blu_color_data);
colors_remaining -= pkt_size;
pkt_offset += pkt_size;
}
/*-----------------------------------------------------*\
| Send Commit packet |
\*-----------------------------------------------------*/
SendCommit();
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void CorsairLightingNodeController::SendFirmwareRequest()
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Firmware Version Request packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_FIRMWARE;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x80 + endpoint, usb_buf, 64, &actual, 0);
if(actual > 0)
{
firmware_version = std::to_string(usb_buf[0x01]) + "." + std::to_string(usb_buf[0x02]) + "." + std::to_string(usb_buf[0x03]);
}
}
void CorsairLightingNodeController::SendDirect
(
unsigned char channel,
unsigned char start,
unsigned char count,
unsigned char color_channel,
unsigned char* color_data
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Direct packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_DIRECT;
usb_buf[0x01] = channel;
usb_buf[0x02] = start;
usb_buf[0x03] = count;
usb_buf[0x04] = color_channel;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x05], color_data, count);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
}
void CorsairLightingNodeController::SendCommit()
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Commit packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_COMMIT;
usb_buf[0x01] = 0xFF;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
}
void CorsairLightingNodeController::SendBegin
(
unsigned char channel
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Begin packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_BEGIN;
usb_buf[0x01] = channel;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
}
void CorsairLightingNodeController::SendEffectConfig
(
unsigned char channel,
unsigned char count,
unsigned char led_type,
unsigned char mode,
unsigned char speed,
unsigned char direction,
unsigned char change_style,
unsigned char color_0_red,
unsigned char color_0_green,
unsigned char color_0_blue,
unsigned char color_1_red,
unsigned char color_1_green,
unsigned char color_1_blue,
unsigned char color_2_red,
unsigned char color_2_green,
unsigned char color_2_blue,
unsigned short temperature_0,
unsigned short temperature_1,
unsigned short temperature_2
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Effect Config packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_EFFECT_CONFIG;
usb_buf[0x01] = channel;
usb_buf[0x02] = count * 10;
usb_buf[0x03] = led_type;
/*-----------------------------------------------------*\
| Set up mode parameters |
\*-----------------------------------------------------*/
usb_buf[0x04] = mode;
usb_buf[0x05] = speed;
usb_buf[0x06] = direction;
usb_buf[0x07] = change_style;
usb_buf[0x08] = 0;
/*-----------------------------------------------------*\
| Set up mode colors |
\*-----------------------------------------------------*/
usb_buf[0x09] = color_0_red;
usb_buf[0x10] = color_0_green;
usb_buf[0x11] = color_0_blue;
usb_buf[0x12] = color_1_red;
usb_buf[0x13] = color_1_green;
usb_buf[0x14] = color_1_blue;
usb_buf[0x15] = color_2_red;
usb_buf[0x16] = color_2_green;
usb_buf[0x17] = color_2_blue;
/*-----------------------------------------------------*\
| Set up temperatures |
\*-----------------------------------------------------*/
usb_buf[0x12] = (temperature_0 >> 8);
usb_buf[0x13] = (temperature_0 & 0xFF);
usb_buf[0x14] = (temperature_1 >> 8);
usb_buf[0x15] = (temperature_1 & 0xFF);
usb_buf[0x16] = (temperature_2 >> 8);
usb_buf[0x17] = (temperature_2 & 0xFF);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
}
void CorsairLightingNodeController::SendTemperature()
{
}
void CorsairLightingNodeController::SendReset
(
unsigned char channel
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Reset packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_RESET;
usb_buf[0x01] = channel;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
}
void CorsairLightingNodeController::SendPortState
(
unsigned char channel,
unsigned char state
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Port State packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_LIGHTING_NODE_PACKET_ID_PORT_STATE;
usb_buf[0x01] = channel;
usb_buf[0x02] = state;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, endpoint, usb_buf, 64, &actual, 0);
}
void CorsairLightingNodeController::SendBrightness()
{
}
void CorsairLightingNodeController::SendLEDCount()
{
}
void CorsairLightingNodeController::SendProtocol()
{
}
@@ -0,0 +1,173 @@
/*---------------------------------------------------------*\
| Definitions for Corsair Lighting Node Pro |
| |
| Adam Honse ([email protected]), 1/12/2020 |
\*---------------------------------------------------------*/
#include "RGBController.h"
#include <vector>
#include <libusb-1.0/libusb.h>
#pragma once
enum
{
CORSAIR_LIGHTING_NODE_PACKET_ID_FIRMWARE = 0x02, /* Get firmware version */
CORSAIR_LIGHTING_NODE_PACKET_ID_DIRECT = 0x32, /* Direct mode LED update packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_COMMIT = 0x33, /* Commit changes packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_BEGIN = 0x34, /* Begin effect packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_EFFECT_CONFIG = 0x35, /* Effect mode configuration packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_TEMPERATURE = 0x36, /* Update temperature value packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_RESET = 0x37, /* Reset channel packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_PORT_STATE = 0x38, /* Set port state packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_BRIGHTNESS = 0x39, /* Set brightness packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_LED_COUNT = 0x3A, /* Set LED count packet */
CORSAIR_LIGHTING_NODE_PACKET_ID_PROTOCOL = 0x3B, /* Set protocol packet */
};
enum
{
CORSAIR_LIGHTING_NODE_DIRECT_CHANNEL_RED = 0x00, /* Red channel for direct update */
CORSAIR_LIGHTING_NODE_DIRECT_CHANNEL_GREEN = 0x01, /* Green channel for direct update */
CORSAIR_LIGHTING_NODE_DIRECT_CHANNEL_BLUE = 0x02, /* Blue channel for direct update */
};
enum
{
CORSAIR_LIGHTING_NODE_PORT_STATE_HARDWARE = 0x01, /* Effect hardware control of channel */
CORSAIR_LIGHTING_NODE_PORT_STATE_SOFTWARE = 0x02, /* Direct software control of channel */
};
enum
{
CORSAIR_LIGHTING_NODE_LED_TYPE_LED_STRIP = 0x0A, /* Corsair LED Strip Type */
CORSAIR_LIGHTING_NODE_LED_TYPE_HD_FAN = 0x0C, /* Corsair HD-series Fan Type */
CORSAIR_LIGHTING_NODE_LED_TYPE_SP_FAN = 0x01, /* Corsair SP-series Fan Type */
CORSAIR_LIGHTING_NODE_LED_TYPE_ML_FAN = 0x02, /* Corsair ML-series Fan Type */
};
enum
{
CORSAIR_LIGHTING_NODE_CHANNEL_1 = 0x00, /* Channel 1 */
CORSAIR_LIGHTING_NODE_CHANNEL_2 = 0x01, /* Channel 2 */
CORSAIR_LIGHTING_NODE_NUM_CHANNELS = 0x02, /* Number of channels */
};
enum
{
CORSAIR_LIGHTING_NODE_SPEED_FAST = 0x00, /* Fast speed */
CORSAIR_LIGHTING_NODE_SPEED_MEDIUM = 0x01, /* Medium speed */
CORSAIR_LIGHTING_NODE_SPEED_SLOW = 0x02, /* Slow speed */
};
enum
{
CORSAIR_LIGHTING_NODE_MODE_RAINBOW_WAVE = 0x00, /* Rainbow Wave mode */
CORSAIR_LIGHTING_NODE_MODE_COLOR_SHIFT = 0x01, /* Color Shift mode */
CORSAIR_LIGHTING_NODE_MODE_COLOR_PULSE = 0x02, /* Color Pulse mode */
CORSAIR_LIGHTING_NODE_MODE_COLOR_WAVE = 0x03, /* Color Wave mode */
CORSAIR_LIGHTING_NODE_MODE_STATIC = 0x04, /* Static mode */
CORSAIR_LIGHTING_NODE_MODE_TEMPERATURE = 0x05, /* Temperature mode */
CORSAIR_LIGHTING_NODE_MODE_VISOR = 0x06, /* Visor mode */
CORSAIR_LIGHTING_NODE_MODE_MARQUEE = 0x07, /* Marquee mode */
CORSAIR_LIGHTING_NODE_MODE_BLINK = 0x08, /* Blink mode */
CORSAIR_LIGHTING_NODE_MODE_SEQUENTIAL = 0x09, /* Sequential mode */
CORSAIR_LIGHTING_NODE_MODE_RAINBOW = 0x0A, /* Rainbow mode */
};
class CorsairLightingNodeController
{
public:
CorsairLightingNodeController(libusb_device_handle* dev_handle, unsigned int dev_endpoint);
~CorsairLightingNodeController();
std::string GetFirmwareString();
unsigned int GetStripsOnChannel(unsigned int channel);
void SetChannelEffect(unsigned char channel,
unsigned char num_leds,
unsigned char mode,
unsigned char speed,
unsigned char direction,
bool random,
unsigned char red1,
unsigned char grn1,
unsigned char blu1,
unsigned char red2,
unsigned char grn2,
unsigned char blu2,
unsigned char red3,
unsigned char grn3,
unsigned char blu3
);
void SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors);
void KeepaliveThread();
private:
libusb_device_handle* dev;
unsigned int endpoint;
std::string firmware_version;
void SendFirmwareRequest();
void SendDirect
(
unsigned char channel,
unsigned char start,
unsigned char count,
unsigned char color_channel,
unsigned char* color_data
);
void SendCommit();
void SendBegin
(
unsigned char channel
);
void SendEffectConfig
(
unsigned char channel,
unsigned char count,
unsigned char led_type,
unsigned char mode,
unsigned char speed,
unsigned char direction,
unsigned char change_style,
unsigned char color_0_red,
unsigned char color_0_green,
unsigned char color_0_blue,
unsigned char color_1_red,
unsigned char color_1_green,
unsigned char color_1_blue,
unsigned char color_2_red,
unsigned char color_2_green,
unsigned char color_2_blue,
unsigned short temperature_0,
unsigned short temperature_1,
unsigned short temperature_2
);
void SendTemperature();
void SendReset
(
unsigned char channel
);
void SendPortState
(
unsigned char channel,
unsigned char state
);
void SendBrightness();
void SendLEDCount();
void SendProtocol();
};
@@ -0,0 +1,67 @@
#include "CorsairLightingNodeController.h"
#include "RGBController.h"
#include "RGBController_CorsairLightingNode.h"
#include <vector>
#include <libusb-1.0/libusb.h>
#define CORSAIR_VID 0x1B1C
#define CORSAIR_LIGHTING_NODE_CORE_PID 0x0C1A
#define CORSAIR_LIGHTING_NODE_PRO_PID 0x0C0B
#define CORSAIR_COMMANDER_PRO_PID 0x0C10
#define CORSAIR_LS100_PID 0x0C1E
#define CORSAIR_1000D_OBSIDIAN_PID 0x1D00
#define CORSAIR_SPEC_OMEGA_RGB_PID 0x1D04
typedef struct
{
unsigned short usb_vid;
unsigned short usb_pid;
unsigned char usb_endpoint;
unsigned char channel_count;
const char * name;
} corsair_node_device;
static const corsair_node_device device_list[6] =
{
{ CORSAIR_VID, CORSAIR_LIGHTING_NODE_CORE_PID, 1, 1, "Corsair Lighting Node Core" },
{ CORSAIR_VID, CORSAIR_LIGHTING_NODE_PRO_PID, 1, 2, "Corsair Lighting Node Pro" },
{ CORSAIR_VID, CORSAIR_COMMANDER_PRO_PID, 2, 2, "Corsair Commander Pro" },
{ CORSAIR_VID, CORSAIR_LS100_PID, 1, 1, "Corsair LS100 Lighting Kit" },
{ CORSAIR_VID, CORSAIR_1000D_OBSIDIAN_PID, 2, 2, "Corsair 1000D Obsidian" },
{ CORSAIR_VID, CORSAIR_SPEC_OMEGA_RGB_PID, 1, 2, "Corsair SPEC OMEGA RGB" }
};
/******************************************************************************************\
* *
* DetectCorsairLightingNodeControllers *
* *
* Detect devices supported by the Corsair Lighting Node Pro driver *
* * *
\******************************************************************************************/
void DetectCorsairLightingNodeControllers(std::vector<RGBController*> &rgb_controllers)
{
libusb_context * ctx;
libusb_init(&ctx);
for(int device_idx = 0; device_idx < 6; device_idx++)
{
//Look for Corsair Lighting Node Device
libusb_device_handle * dev = libusb_open_device_with_vid_pid(ctx, device_list[device_idx].usb_vid, device_list[device_idx].usb_pid);
if( dev )
{
libusb_detach_kernel_driver(dev, 0);
libusb_claim_interface(dev, 0);
CorsairLightingNodeController* controller = new CorsairLightingNodeController(dev, device_list[device_idx].usb_endpoint);
RGBController_CorsairLightingNode* rgb_controller = new RGBController_CorsairLightingNode(controller);
rgb_controller->name = device_list[device_idx].name;
rgb_controllers.push_back(rgb_controller);
}
}
} /* DetectCorsairLightingNodeControllers() */
@@ -0,0 +1,500 @@
/*-----------------------------------------*\
| CorsairPeripheralController.cpp |
| |
| Driver for Corsair RGB keyboard, mouse, |
| and mousemat lighting controller |
| |
| Adam Honse (CalcProgrammer1) 1/9/2020 |
\*-----------------------------------------*/
#include "CorsairPeripheralController.h"
#include <cstring>
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
static unsigned int keys[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0C, 0x0D, 0x0E, 0x0F, 0x11, 0x12,
0x14, 0x15, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x24, 0x25, 0x26,
0x27, 0x28, 0x2A, 0x2B, 0x2C, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x42, 0x43, 0x44, 0x45, 0x48, 73, 74, 75, 76, 78,
79, 80, 81, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 96, 97,
98, 99, 100, 101, 102, 103, 104, 105, 108, 109, 110, 111, 112, 113, 115,
116, 117, 120, 121, 122, 123, 124, 126, 127, 128, 129, 132, 133, 134, 135,
136, 137, 139, 140, 141};
static void send_usb_msg(hid_device* dev, char * data_pkt)
{
char usb_pkt[65];
usb_pkt[0] = 0x00;
for(int i = 1; i < 65; i++)
{
usb_pkt[i] = data_pkt[i-1];
}
int bytes = hid_send_feature_report(dev, (unsigned char *)usb_pkt, 65);
bytes++;
Sleep(2);
}
CorsairPeripheralController::CorsairPeripheralController(hid_device* dev_handle)
{
dev = dev_handle;
ReadFirmwareInfo();
SpecialFunctionControl();
LightingControl();
}
CorsairPeripheralController::~CorsairPeripheralController()
{
}
device_type CorsairPeripheralController::GetDeviceType()
{
return type;
}
std::string CorsairPeripheralController::GetFirmwareString()
{
return firmware_version;
}
void CorsairPeripheralController::SetLEDs(std::vector<RGBColor>colors)
{
switch(type)
{
case DEVICE_TYPE_KEYBOARD:
SetLEDsKeyboardFull(colors);
break;
case DEVICE_TYPE_MOUSE:
SetLEDsMouse(colors);
break;
case DEVICE_TYPE_MOUSEMAT:
SetLEDsMousemat(colors);
break;
}
}
void CorsairPeripheralController::SetLEDsKeyboardFull(std::vector<RGBColor> colors)
{
unsigned char red_val[144];
unsigned char grn_val[144];
unsigned char blu_val[144];
/*-----------------------------------------------------*\
| Zero out buffers |
\*-----------------------------------------------------*/
memset(red_val, 0x00, sizeof( red_val ));
memset(grn_val, 0x00, sizeof( grn_val ));
memset(blu_val, 0x00, sizeof( blu_val ));
/*-----------------------------------------------------*\
| Copy red, green, and blue components into buffers |
\*-----------------------------------------------------*/
for(std::size_t color_idx = 0; color_idx < colors.size(); color_idx++)
{
RGBColor color = colors[color_idx];
red_val[keys[color_idx]] = RGBGetRValue(color);
grn_val[keys[color_idx]] = RGBGetGValue(color);
blu_val[keys[color_idx]] = RGBGetBValue(color);
}
/*-----------------------------------------------------*\
| Send red bytes |
\*-----------------------------------------------------*/
StreamPacket(1, 60, &red_val[0]);
StreamPacket(2, 60, &red_val[60]);
StreamPacket(3, 24, &red_val[120]);
SubmitKeyboardFullColors(1, 3, 1);
/*-----------------------------------------------------*\
| Send green bytes |
\*-----------------------------------------------------*/
StreamPacket(1, 60, &grn_val[0]);
StreamPacket(2, 60, &grn_val[60]);
StreamPacket(3, 24, &grn_val[120]);
SubmitKeyboardFullColors(2, 3, 1);
/*-----------------------------------------------------*\
| Send blue bytes |
\*-----------------------------------------------------*/
StreamPacket(1, 60, &blu_val[0]);
StreamPacket(2, 60, &blu_val[60]);
StreamPacket(3, 24, &blu_val[120]);
SubmitKeyboardFullColors(3, 3, 2);
}
void CorsairPeripheralController::SetLEDsMouse(std::vector<RGBColor> colors)
{
SubmitMouseColors(colors.size(), &colors[0]);
}
void CorsairPeripheralController::SetLEDsMousemat(std::vector<RGBColor> colors)
{
SubmitMousematColors(colors.size(), &colors[0]);
}
void CorsairPeripheralController::SetLEDsKeyboardLimited(std::vector<RGBColor> colors)
{
unsigned char data_pkt[216];
unsigned char red_val[144];
unsigned char grn_val[144];
unsigned char blu_val[144];
/*-----------------------------------------------------*\
| Zero out buffers |
\*-----------------------------------------------------*/
memset(data_pkt, 0x00, sizeof( data_pkt ));
memset(red_val, 0x00, sizeof( red_val ));
memset(grn_val, 0x00, sizeof( grn_val ));
memset(blu_val, 0x00, sizeof( blu_val ));
/*-----------------------------------------------------*\
| Scale color values to 9-bit |
\*-----------------------------------------------------*/
for(std::size_t color_idx = 0; color_idx < colors.size(); color_idx++)
{
RGBColor color = colors[color_idx];
unsigned char red = RGBGetRValue(color);
unsigned char grn = RGBGetGValue(color);
unsigned char blu = RGBGetBValue(color);
if( red > 7 ) red = 7;
if( grn > 7 ) grn = 7;
if( blu > 7 ) blu = 7;
red = 7 - red;
grn = 7 - grn;
blu = 7 - blu;
red_val[keys[color_idx]] = red;
grn_val[keys[color_idx]] = grn;
blu_val[keys[color_idx]] = blu;
}
/*-----------------------------------------------------*\
| Pack the color values, 2 values per byte |
\*-----------------------------------------------------*/
for(int red_idx = 0; red_idx < 72; red_idx++)
{
data_pkt[red_idx] = red_val[(red_idx * 2) + 1] << 4 | red_val[red_idx * 2];
}
for(int grn_idx = 0; grn_idx < 72; grn_idx++)
{
data_pkt[grn_idx + 72] = grn_val[(grn_idx * 2) + 1] << 4 | grn_val[grn_idx * 2];
}
for(int blu_idx = 0; blu_idx < 72; blu_idx++)
{
data_pkt[blu_idx + 144] = blu_val[(blu_idx * 2) + 1] << 4 | blu_val[blu_idx * 2];
}
/*-----------------------------------------------------*\
| Send the packets |
\*-----------------------------------------------------*/
StreamPacket(1, 60, &data_pkt[0]);
StreamPacket(2, 60, &data_pkt[60]);
StreamPacket(3, 60, &data_pkt[120]);
StreamPacket(4, 36, &data_pkt[180]);
SubmitKeyboardLimitedColors(216);
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void CorsairPeripheralController::LightingControl()
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Lighting Control packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_WRITE;
usb_buf[0x01] = CORSAIR_PROPERTY_LIGHTING_CONTROL;
usb_buf[0x02] = CORSAIR_LIGHTING_CONTROL_SOFTWARE;
/*-----------------------------------------------------*\
| Lighting control byte needs to be 3 for keyboards, 1 |
| for mice and mousepads |
\*-----------------------------------------------------*/
switch(type)
{
default:
case DEVICE_TYPE_KEYBOARD:
usb_buf[0x04] = 0x03;
break;
case DEVICE_TYPE_MOUSE:
usb_buf[0x04] = 0x01;
break;
case DEVICE_TYPE_MOUSEMAT:
usb_buf[0x04] = 0x04;
break;
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
void CorsairPeripheralController::SpecialFunctionControl()
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Lighting Control packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_WRITE;
usb_buf[0x01] = CORSAIR_PROPERTY_SPECIAL_FUNCTION;
usb_buf[0x02] = CORSAIR_LIGHTING_CONTROL_SOFTWARE;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
void CorsairPeripheralController::ReadFirmwareInfo()
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Read Firmware Info packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_READ;
usb_buf[0x01] = CORSAIR_PROPERTY_FIRMWARE_INFO;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
hid_get_feature_report(dev, (unsigned char*)usb_buf, 64);
/*-----------------------------------------------------*\
| Get device type |
| 0xC0 Device is a keyboard |
| 0xC1 Device is a mouse |
| 0xC2 Device is a mousepad |
\*-----------------------------------------------------*/
switch((unsigned char)usb_buf[0x14])
{
case 0xC0:
type = DEVICE_TYPE_KEYBOARD;
break;
case 0xC1:
type = DEVICE_TYPE_MOUSE;
break;
case 0xC2:
type = DEVICE_TYPE_MOUSEMAT;
break;
default:
type = DEVICE_TYPE_UNKNOWN;
break;
}
/*-----------------------------------------------------*\
| Format firmware version string if device type is valid|
\*-----------------------------------------------------*/
if(type != DEVICE_TYPE_UNKNOWN)
{
firmware_version = std::to_string(usb_buf[0x09]) + "." + std::to_string(usb_buf[0x08]);
}
}
void CorsairPeripheralController::StreamPacket
(
unsigned char packet_id,
unsigned char data_sz,
unsigned char* data_ptr
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Stream packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_STREAM;
usb_buf[0x01] = packet_id;
usb_buf[0x02] = data_sz;
/*-----------------------------------------------------*\
| Copy in data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x04], data_ptr, data_sz);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
void CorsairPeripheralController::SubmitKeyboardFullColors
(
unsigned char color_channel,
unsigned char packet_count,
unsigned char finish_val
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Submit Keyboard 24-Bit Colors packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_WRITE;
usb_buf[0x01] = CORSAIR_PROPERTY_SUBMIT_KEYBOARD_COLOR_24;
usb_buf[0x02] = color_channel;
usb_buf[0x03] = packet_count;
usb_buf[0x04] = finish_val;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
void CorsairPeripheralController::SubmitKeyboardLimitedColors
(
unsigned char byte_count
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Submit Keyboard 9-Bit Colors packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_WRITE;
usb_buf[0x01] = CORSAIR_PROPERTY_SUBMIT_KEYBOARD_COLOR_9;
usb_buf[0x04] = byte_count;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
void CorsairPeripheralController::SubmitMouseColors
(
unsigned char num_zones,
RGBColor * color_data
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Submit Mouse Colors packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_WRITE;
usb_buf[0x01] = CORSAIR_PROPERTY_SUBMIT_MOUSE_COLOR;
usb_buf[0x02] = num_zones;
usb_buf[0x03] = 0x00;
/*-----------------------------------------------------*\
| Copy in colors in <ZONE> <RED> <GREEN> <BLUE> order |
\*-----------------------------------------------------*/
for(unsigned int zone_idx = 0; zone_idx < num_zones; zone_idx++)
{
usb_buf[(zone_idx * 4) + 4] = zone_idx;
usb_buf[(zone_idx * 4) + 5] = RGBGetRValue(color_data[zone_idx]);
usb_buf[(zone_idx * 4) + 6] = RGBGetGValue(color_data[zone_idx]);
usb_buf[(zone_idx * 4) + 7] = RGBGetBValue(color_data[zone_idx]);
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
void CorsairPeripheralController::SubmitMousematColors
(
unsigned char num_zones,
RGBColor * color_data
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Submit Mouse Colors packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = CORSAIR_COMMAND_WRITE;
usb_buf[0x01] = CORSAIR_PROPERTY_SUBMIT_MOUSE_COLOR;
usb_buf[0x02] = num_zones;
usb_buf[0x03] = 0x00;
/*-----------------------------------------------------*\
| Copy in colors in <ZONE> <RED> <GREEN> <BLUE> order |
\*-----------------------------------------------------*/
for(unsigned int zone_idx = 0; zone_idx < num_zones; zone_idx++)
{
//usb_buf[(zone_idx * 4) + 4] = zone_idx;
usb_buf[(zone_idx * 3) + 4] = RGBGetRValue(color_data[zone_idx]);
usb_buf[(zone_idx * 3) + 5] = RGBGetGValue(color_data[zone_idx]);
usb_buf[(zone_idx * 3) + 6] = RGBGetBValue(color_data[zone_idx]);
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf);
}
@@ -0,0 +1,106 @@
/*-----------------------------------------*\
| CorsairPeripheralController.h |
| |
| Definitions and types for Corsair RGB |
| keyboard, mouse, and mousemat lighting |
| controller |
| |
| Adam Honse (CalcProgrammer1) 1/9/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
CORSAIR_COMMAND_WRITE = 0x07,
CORSAIR_COMMAND_READ = 0x0E,
CORSAIR_COMMAND_STREAM = 0x7F
};
enum
{
CORSAIR_PROPERTY_FIRMWARE_INFO = 0x01,
CORSAIR_PROPERTY_RESET = 0x02,
CORSAIR_PROPERTY_SPECIAL_FUNCTION = 0x04,
CORSAIR_PROPERTY_LIGHTING_CONTROL = 0x05,
CORSAIR_PROPERTY_HARDWARE_PROFILE = 0x13,
CORSAIR_PROPERTY_SUBMIT_MOUSE_COLOR = 0x22,
CORSAIR_PROPERTY_SUBMIT_KEYBOARD_COLOR_9 = 0x27,
CORSAIR_PROPERTY_SUBMIT_KEYBOARD_COLOR_24 = 0x28,
};
enum
{
CORSAIR_LIGHTING_CONTROL_HARDWARE = 0x01,
CORSAIR_LIGHTING_CONTROL_SOFTWARE = 0x02
};
enum
{
CORSAIR_COLOR_CHANNEL_RED = 0x01,
CORSAIR_COLOR_CHANNEL_GREEN = 0x02,
CORSAIR_COLOR_CHANNEL_BLUE = 0x03
};
class CorsairPeripheralController
{
public:
CorsairPeripheralController(hid_device* dev_handle);
~CorsairPeripheralController();
device_type GetDeviceType();
std::string GetFirmwareString();
void SetLEDs(std::vector<RGBColor> colors);
void SetLEDsKeyboardFull(std::vector<RGBColor> colors);
void SetLEDsKeyboardLimited(std::vector<RGBColor> colors);
void SetLEDsMouse(std::vector<RGBColor> colors);
void SetLEDsMousemat(std::vector<RGBColor> colors);
private:
hid_device* dev;
std::string firmware_version;
device_type type;
void LightingControl();
void SpecialFunctionControl();
void ReadFirmwareInfo();
void StreamPacket
(
unsigned char packet_id,
unsigned char data_sz,
unsigned char* data_ptr
);
void SubmitKeyboardFullColors
(
unsigned char color_channel,
unsigned char packet_count,
unsigned char finish_val
);
void SubmitKeyboardLimitedColors
(
unsigned char byte_count
);
void SubmitMouseColors
(
unsigned char num_zones,
RGBColor * color_data
);
void SubmitMousematColors
(
unsigned char num_zones,
RGBColor * color_data
);
};
@@ -0,0 +1,137 @@
#include "CorsairPeripheralController.h"
#include "RGBController.h"
#include "RGBController_CorsairPeripheral.h"
#include <vector>
#include <hidapi/hidapi.h>
/*-----------------------------------------------------*\
| Corsair vendor ID |
\*-----------------------------------------------------*/
#define CORSAIR_VID 0x1B1C
/*-----------------------------------------------------*\
| Keyboard product IDs |
| List taken from ckb-next |
| Non-RGB keyboards were omitted from this list |
\*-----------------------------------------------------*/
#define CORSAIR_K55_RGB_PID 0x1B3D
#define CORSAIR_K65_RGB_PID 0x1B17
#define CORSAIR_K65_LUX_RGB_PID 0x1B37
#define CORSAIR_K65_RGB_RAPIDFIRE_PID 0x1B39
#define CORSAIR_K68_RGB 0x1B4F
#define CORSAIR_K70_RGB_PID 0x1B13
#define CORSAIR_K70_LUX_RGB_PID 0x1B33
#define CORSAIR_K70_RGB_RAPIDFIRE_PID 0x1B38
#define CORSAIR_K70_RGB_MK2_PID 0x1B38
#define CORSAIR_K70_RGB_MK2_SE_PID 0x1B6B
#define CORSAIR_K70_RGB_MK2_LP_PID 0x1B55
#define CORSAIR_K95_RGB_PID 0x1B11
#define CORSAIR_K95_PLATINUM_PID 0x1B2D
#define CORSAIR_STRAFE_PID 0x1B20
#define CORSAIR_STRAFE_MK2_PID 0x1B48
/*-----------------------------------------------------*\
| Mouse product IDs |
| List taken from ckb-next |
\*-----------------------------------------------------*/
#define CORSAIR_M65_PRO_PID 0x1B2E
#define CORSAIR_M65_RGB_ELITE_PID 0x1B5A
/*-----------------------------------------------------*\
| Mousepad product IDs |
| List taken from ckb-next |
\*-----------------------------------------------------*/
#define CORSAIR_MM800_RGB_POLARIS_PID 0x1B3B
typedef struct
{
unsigned short usb_vid;
unsigned short usb_pid;
unsigned char usb_interface;
const char * name;
} corsair_node_device;
#define CORSAIR_NUM_DEVICES (sizeof(device_list) / sizeof(device_list[ 0 ]))
static const corsair_node_device device_list[] =
{
/*-----------------------------------------------------------------------------------------------------*\
| Keyboards |
\*-----------------------------------------------------------------------------------------------------*/
{ CORSAIR_VID, CORSAIR_K68_RGB, 1, "Corsair K68 RGB" },
{ CORSAIR_VID, CORSAIR_K70_RGB_PID, 1, "Corsair K70 RGB" },
{ CORSAIR_VID, CORSAIR_K70_LUX_RGB_PID, 1, "Corsair K70 LUX RGB" },
{ CORSAIR_VID, CORSAIR_K70_RGB_RAPIDFIRE_PID, 1, "Corsair K70 RGB RAPIDFIRE" },
{ CORSAIR_VID, CORSAIR_K70_RGB_MK2_PID, 1, "Corsair K70 RGB MK.2" },
{ CORSAIR_VID, CORSAIR_K70_RGB_MK2_SE_PID, 1, "Corsair K70 RGB MK.2 SE" },
{ CORSAIR_VID, CORSAIR_K70_RGB_MK2_LP_PID, 1, "Corsair K70 RGB MK.2 Low Profile" },
{ CORSAIR_VID, CORSAIR_K95_RGB_PID, 1, "Corsair K95 RGB" },
{ CORSAIR_VID, CORSAIR_K95_PLATINUM_PID, 1, "Corsair K95 RGB PLATINUM" },
/*-----------------------------------------------------------------------------------------------------*\
| Mice |
\*-----------------------------------------------------------------------------------------------------*/
{ CORSAIR_VID, CORSAIR_M65_PRO_PID, 1, "Corsair M65 PRO" },
{ CORSAIR_VID, CORSAIR_M65_RGB_ELITE_PID, 1, "Corsair M65 RGB Elite" },
/*-----------------------------------------------------------------------------------------------------*\
| Mousemats |
\*-----------------------------------------------------------------------------------------------------*/
{ CORSAIR_VID, CORSAIR_MM800_RGB_POLARIS_PID, 0, "Corsair MM800 RGB Polaris" }
};
/******************************************************************************************\
* *
* DetectCorsairPeripheralControllers *
* *
* Tests the USB address to see if a Corsair RGB Keyboard controller exists there. *
* *
\******************************************************************************************/
void DetectCorsairPeripheralControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device_info* info;
hid_device* dev;
hid_init();
for(std::size_t device_idx = 0; device_idx < CORSAIR_NUM_DEVICES; device_idx++)
{
dev = NULL;
info = hid_enumerate(device_list[device_idx].usb_vid, device_list[device_idx].usb_pid);
//Look for Corsair RGB Peripheral
while(info)
{
if((info->vendor_id == device_list[device_idx].usb_vid)
&&(info->product_id == device_list[device_idx].usb_pid)
&&(info->interface_number == device_list[device_idx].usb_interface))
{
dev = hid_open_path(info->path);
break;
}
else
{
info = info->next;
}
}
if( dev )
{
CorsairPeripheralController* controller = new CorsairPeripheralController(dev);
if(controller->GetDeviceType() != DEVICE_TYPE_UNKNOWN)
{
RGBController_CorsairPeripheral* rgb_controller = new RGBController_CorsairPeripheral(controller);
rgb_controller->name = device_list[device_idx].name;
rgb_controllers.push_back(rgb_controller);
}
}
}
}
@@ -1,127 +0,0 @@
#include "CorsairProController.h"
#include "RGBController.h"
#include "RGBController_CorsairPro.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
/******************************************************************************************\
* *
* TestForCorsairProController *
* *
* Tests the given address to see if a Corsair Pro controller exists there. *
* *
\******************************************************************************************/
bool TestForCorsairProController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
int res = bus->i2c_smbus_write_quick(address, I2C_SMBUS_WRITE);
if (res >= 0)
{
pass = true;
res = bus->i2c_smbus_read_byte_data(address, 0x24);
if (res != 0x02)
{
pass = false;
}
res = bus->i2c_smbus_read_byte_data(address, 0x25);
if (res != 0x02)
{
pass = false;
}
res = bus->i2c_smbus_read_byte_data(address, 0x43);
if (res != 0x1C)
{
pass = false;
}
res = bus->i2c_smbus_read_byte_data(address, 0x44);
if (res != 0x03)
{
pass = false;
}
}
return(pass);
} /* TestForCorsairProController() */
/******************************************************************************************\
* *
* DetectCorsairProControllers *
* *
* Detect Corsair Pro controllers on the enumerated I2C busses. *
* *
* bus - pointer to i2c_smbus_interface where Aura device is connected *
* dev - I2C address of Aura device *
* *
\******************************************************************************************/
void DetectCorsairProControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
CorsairProController* new_corsair_pro;
RGBController_CorsairPro* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// Check for Corsair controller at 0x58
if (TestForCorsairProController(busses[bus], 0x58))
{
new_corsair_pro = new CorsairProController(busses[bus], 0x58);
new_controller = new RGBController_CorsairPro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x59
if (TestForCorsairProController(busses[bus], 0x59))
{
new_corsair_pro = new CorsairProController(busses[bus], 0x59);
new_controller = new RGBController_CorsairPro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5A
if (TestForCorsairProController(busses[bus], 0x5A))
{
new_corsair_pro = new CorsairProController(busses[bus], 0x5A);
new_controller = new RGBController_CorsairPro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5B
if (TestForCorsairProController(busses[bus], 0x5B))
{
new_corsair_pro = new CorsairProController(busses[bus], 0x5B);
new_controller = new RGBController_CorsairPro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5C
if (TestForCorsairProController(busses[bus], 0x5C))
{
new_corsair_pro = new CorsairProController(busses[bus], 0x5C);
new_controller = new RGBController_CorsairPro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5D
if (TestForCorsairProController(busses[bus], 0x5D))
{
new_corsair_pro = new CorsairProController(busses[bus], 0x5D);
new_controller = new RGBController_CorsairPro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
}
} /* DetectCorsairProControllers() */
@@ -1,5 +1,5 @@
/*-----------------------------------------*\
| CorsairController.h |
| CorsairVengeanceController.h |
| |
| Driver for Corsair Vengeance RGB RAM |
| lighting controller |
@@ -7,10 +7,10 @@
| Adam Honse (CalcProgrammer1) 3/8/2019 |
\*-----------------------------------------*/
#include "CorsairController.h"
#include "CorsairVengeanceController.h"
#include <cstring>
CorsairController::CorsairController(i2c_smbus_interface* bus, corsair_dev_id dev)
CorsairVengeanceController::CorsairVengeanceController(i2c_smbus_interface* bus, corsair_dev_id dev)
{
this->bus = bus;
this->dev = dev;
@@ -19,17 +19,17 @@ CorsairController::CorsairController(i2c_smbus_interface* bus, corsair_dev_id de
led_count = 1;
}
CorsairController::~CorsairController()
CorsairVengeanceController::~CorsairVengeanceController()
{
}
std::string CorsairController::GetDeviceName()
std::string CorsairVengeanceController::GetDeviceName()
{
return(device_name);
}
std::string CorsairController::GetDeviceLocation()
std::string CorsairVengeanceController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
@@ -39,12 +39,12 @@ std::string CorsairController::GetDeviceLocation()
return(return_string);
}
unsigned int CorsairController::GetLEDCount()
unsigned int CorsairVengeanceController::GetLEDCount()
{
return(led_count);
}
void CorsairController::SetAllColors(unsigned char red, unsigned char green, unsigned char blue)
void CorsairVengeanceController::SetLEDColor(unsigned char red, unsigned char green, unsigned char blue)
{
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_FADE_TIME, 0x00);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_RED_VAL, red);
@@ -53,16 +53,7 @@ void CorsairController::SetAllColors(unsigned char red, unsigned char green, uns
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_MODE, CORSAIR_VENGEANCE_RGB_MODE_SINGLE);
}
void CorsairController::SetLEDColor(unsigned int /*led*/, unsigned char red, unsigned char green, unsigned char blue)
{
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_FADE_TIME, 0x00);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_RED_VAL, red);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_GREEN_VAL, green);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_BLUE_VAL, blue);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_MODE, CORSAIR_VENGEANCE_RGB_MODE_SINGLE);
}
void CorsairController::SetMode(unsigned char /*mode*/)
void CorsairVengeanceController::SetMode(unsigned char /*mode*/)
{
bus->i2c_smbus_write_byte_data(dev, CORSAIR_VENGEANCE_RGB_CMD_MODE, CORSAIR_VENGEANCE_RGB_MODE_SINGLE);
}
@@ -1,5 +1,5 @@
/*-----------------------------------------*\
| CorsairController.h |
| CorsairVengeanceController.h |
| |
| Definitions and types for Corsair |
| Vengeance RGB RAM lighting controller |
@@ -33,19 +33,18 @@ enum
CORSAIR_NUMBER_MODES /* Number of Corsair modes */
};
class CorsairController
class CorsairVengeanceController
{
public:
CorsairController(i2c_smbus_interface* bus, corsair_dev_id dev);
~CorsairController();
CorsairVengeanceController(i2c_smbus_interface* bus, corsair_dev_id dev);
~CorsairVengeanceController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned int GetLEDCount();
void SetMode(unsigned char mode);
void SetAllColors(unsigned char red, unsigned char green, unsigned char blue);
void SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue);
void SetLEDColor(unsigned char red, unsigned char green, unsigned char blue);
private:
char device_name[32];
@@ -1,6 +1,6 @@
#include "CorsairController.h"
#include "CorsairVengeanceController.h"
#include "RGBController.h"
#include "RGBController_Corsair.h"
#include "RGBController_CorsairVengeance.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
@@ -8,13 +8,13 @@
/******************************************************************************************\
* *
* TestForCorsairController *
* TestForCorsairVengeanceController *
* *
* Tests the given address to see if a Corsair controller exists there. *
* *
\******************************************************************************************/
bool TestForCorsairController(i2c_smbus_interface* bus, unsigned char address)
bool TestForCorsairVengeanceController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
@@ -37,11 +37,11 @@ bool TestForCorsairController(i2c_smbus_interface* bus, unsigned char address)
return(pass);
} /* TestForCorsairController() */
} /* TestForCorsairVengeanceController() */
/******************************************************************************************\
* *
* DetectCorsairControllers *
* DetectCorsairVengeanceControllers *
* *
* Detect Corsair controllers on the enumerated I2C busses. *
* *
@@ -50,60 +50,76 @@ bool TestForCorsairController(i2c_smbus_interface* bus, unsigned char address)
* *
\******************************************************************************************/
void DetectCorsairControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
void DetectCorsairVengeanceControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
CorsairController* new_corsair;
RGBController_Corsair* new_controller;
CorsairVengeanceController* new_corsair;
RGBController_CorsairVengeance* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// Check for Corsair controller at 0x58
if (TestForCorsairController(busses[bus], 0x58))
if (TestForCorsairVengeanceController(busses[bus], 0x58))
{
new_corsair = new CorsairController(busses[bus], 0x58);
new_controller = new RGBController_Corsair(new_corsair);
new_corsair = new CorsairVengeanceController(busses[bus], 0x58);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x59
if (TestForCorsairController(busses[bus], 0x59))
if (TestForCorsairVengeanceController(busses[bus], 0x59))
{
new_corsair = new CorsairController(busses[bus], 0x59);
new_controller = new RGBController_Corsair(new_corsair);
new_corsair = new CorsairVengeanceController(busses[bus], 0x59);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5A
if (TestForCorsairController(busses[bus], 0x5A))
if (TestForCorsairVengeanceController(busses[bus], 0x5A))
{
new_corsair = new CorsairController(busses[bus], 0x5A);
new_controller = new RGBController_Corsair(new_corsair);
new_corsair = new CorsairVengeanceController(busses[bus], 0x5A);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5B
if (TestForCorsairController(busses[bus], 0x5B))
if (TestForCorsairVengeanceController(busses[bus], 0x5B))
{
new_corsair = new CorsairController(busses[bus], 0x5B);
new_controller = new RGBController_Corsair(new_corsair);
new_corsair = new CorsairVengeanceController(busses[bus], 0x5B);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5C
if (TestForCorsairController(busses[bus], 0x5C))
if (TestForCorsairVengeanceController(busses[bus], 0x5C))
{
new_corsair = new CorsairController(busses[bus], 0x5C);
new_controller = new RGBController_Corsair(new_corsair);
new_corsair = new CorsairVengeanceController(busses[bus], 0x5C);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5D
if (TestForCorsairController(busses[bus], 0x5D))
if (TestForCorsairVengeanceController(busses[bus], 0x5D))
{
new_corsair = new CorsairController(busses[bus], 0x5D);
new_controller = new RGBController_Corsair(new_corsair);
new_corsair = new CorsairVengeanceController(busses[bus], 0x5D);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5E
if (TestForCorsairVengeanceController(busses[bus], 0x5E))
{
new_corsair = new CorsairVengeanceController(busses[bus], 0x5E);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5F
if (TestForCorsairVengeanceController(busses[bus], 0x5F))
{
new_corsair = new CorsairVengeanceController(busses[bus], 0x5F);
new_controller = new RGBController_CorsairVengeance(new_corsair);
rgb_controllers.push_back(new_controller);
}
}
} /* DetectCorsairControllers() */
} /* DetectCorsairVengeanceControllers() */
@@ -1,5 +1,5 @@
/*-----------------------------------------*\
| CorsairProController.cpp |
| CorsairVengeanceProController.cpp |
| |
| Definitions and types for Corsair |
| Vengeance Pro RGB RAM lighting controller|
@@ -7,7 +7,7 @@
| Adam Honse (CalcProgrammer1) 6/30/2019 |
\*-----------------------------------------*/
#include "CorsairProController.h"
#include "CorsairVengeanceProController.h"
#include <cstring>
#ifdef WIN32
@@ -21,7 +21,7 @@ static void Sleep(unsigned int milliseconds)
}
#endif
CorsairProController::CorsairProController(i2c_smbus_interface* bus, corsair_dev_id dev)
CorsairVengeanceProController::CorsairVengeanceProController(i2c_smbus_interface* bus, corsair_dev_id dev)
{
this->bus = bus;
this->dev = dev;
@@ -29,6 +29,8 @@ CorsairProController::CorsairProController(i2c_smbus_interface* bus, corsair_dev
strcpy(device_name, "Corsair Vengeance Pro RGB");
led_count = CORSAIR_PRO_LED_COUNT;
effect_mode = CORSAIR_PRO_MODE_STATIC;
for (unsigned int i = 0; i < led_count; i++)
{
led_red[i] = 0;
@@ -37,17 +39,17 @@ CorsairProController::CorsairProController(i2c_smbus_interface* bus, corsair_dev
}
}
CorsairProController::~CorsairProController()
CorsairVengeanceProController::~CorsairVengeanceProController()
{
}
std::string CorsairProController::GetDeviceName()
std::string CorsairVengeanceProController::GetDeviceName()
{
return(device_name);
}
std::string CorsairProController::GetDeviceLocation()
std::string CorsairVengeanceProController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
@@ -57,12 +59,17 @@ std::string CorsairProController::GetDeviceLocation()
return(return_string);
}
unsigned int CorsairProController::GetLEDCount()
unsigned int CorsairVengeanceProController::GetLEDCount()
{
return(led_count);
}
void CorsairProController::SetAllColors(unsigned char red, unsigned char green, unsigned char blue)
unsigned char CorsairVengeanceProController::GetEffect()
{
return(effect_mode);
}
void CorsairVengeanceProController::SetAllColors(unsigned char red, unsigned char green, unsigned char blue)
{
for (unsigned int i = 0; i < led_count; i++)
{
@@ -72,14 +79,14 @@ void CorsairProController::SetAllColors(unsigned char red, unsigned char green,
}
}
void CorsairProController::SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void CorsairVengeanceProController::SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
led_red[led] = red;
led_green[led] = green;
led_blue[led] = blue;
}
void CorsairProController::ApplyColors()
void CorsairVengeanceProController::ApplyColors()
{
bus->i2c_smbus_write_byte_data(dev, 0x26, 0x02);
Sleep(1);
@@ -97,24 +104,47 @@ void CorsairProController::ApplyColors()
bus->i2c_smbus_write_byte_data(dev, 0x82, 0x02);
}
void CorsairProController::SetEffect(unsigned char mode)
void CorsairVengeanceProController::SetEffect(unsigned char mode,
unsigned char speed,
unsigned char direction,
bool random,
unsigned char red1,
unsigned char grn1,
unsigned char blu1,
unsigned char red2,
unsigned char grn2,
unsigned char blu2
)
{
effect_mode = mode;
bus->i2c_smbus_write_byte_data(dev, 0x26, 0x01);
Sleep(1);
bus->i2c_smbus_write_byte_data(dev, 0x21, 0x00);
Sleep(1);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, mode); //Mode
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, CORSAIR_PRO_SPEED_MEDIUM); //Speed
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, CORSAIR_PRO_EFFECT_RANDOM_COLORS); //Custom color
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, CORSAIR_PRO_DIRECTION_UP); //Direction
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00); // Custom color 1 red
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00); // Custom color 1 green
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00); // Custom color 1 blue
unsigned char random_byte;
if(random)
{
random_byte = CORSAIR_PRO_EFFECT_RANDOM_COLORS;
}
else
{
random_byte = CORSAIR_PRO_EFFECT_CUSTOM_COLORS;
}
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, effect_mode); //Mode
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, speed); //Speed
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, random_byte); //Custom color
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, direction); //Direction
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, red1); // Custom color 1 red
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, grn1); // Custom color 1 green
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, blu1); // Custom color 1 blue
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0xFF);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00); // Custom color 2 red
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00); // Custom color 2 green
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00); // Custom color 2 blue
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, red2); // Custom color 2 red
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, grn2); // Custom color 2 green
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, blu2); // Custom color 2 blue
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0xFF);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00);
bus->i2c_smbus_write_byte_data(dev, CORSAIR_PRO_REG_COMMAND, 0x00);
@@ -129,12 +159,7 @@ void CorsairProController::SetEffect(unsigned char mode)
WaitReady();
}
void CorsairProController::SetCustom()
{
SetEffect(CORSAIR_PRO_MODE_STATIC);
}
bool CorsairProController::WaitReady()
bool CorsairVengeanceProController::WaitReady()
{
int i = 0;
while (bus->i2c_smbus_read_byte_data(dev, 0x41) != 0x00)
@@ -1,5 +1,5 @@
/*-----------------------------------------*\
| CorsairProController.h |
| CorsairVengeanceProController.h |
| |
| Definitions and types for Corsair |
| Vengeance Pro RGB RAM lighting controller|
@@ -60,17 +60,27 @@ enum
CORSAIR_PRO_DIRECTION_HORIZONTAL = 0x03, /* Horizontal direction */
};
class CorsairProController
class CorsairVengeanceProController
{
public:
CorsairProController(i2c_smbus_interface* bus, corsair_dev_id dev);
~CorsairProController();
CorsairVengeanceProController(i2c_smbus_interface* bus, corsair_dev_id dev);
~CorsairVengeanceProController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned int GetLEDCount();
void SetEffect(unsigned char mode);
void SetCustom();
unsigned char GetEffect();
void SetEffect(unsigned char mode,
unsigned char speed,
unsigned char direction,
bool random,
unsigned char red1,
unsigned char grn1,
unsigned char blu1,
unsigned char red2,
unsigned char grn2,
unsigned char blu2
);
void SetAllColors(unsigned char red, unsigned char green, unsigned char blue);
void SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue);
@@ -80,7 +90,7 @@ public:
private:
char device_name[32];
unsigned int led_count;
unsigned char effect_mode;
unsigned char led_red[CORSAIR_PRO_LED_COUNT];
unsigned char led_green[CORSAIR_PRO_LED_COUNT];
unsigned char led_blue[CORSAIR_PRO_LED_COUNT];
@@ -0,0 +1,142 @@
#include "CorsairVengeanceProController.h"
#include "RGBController.h"
#include "RGBController_CorsairVengeancePro.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
/******************************************************************************************\
* *
* TestForCorsairVengeanceProController *
* *
* Tests the given address to see if a Corsair Pro controller exists there. *
* *
\******************************************************************************************/
bool TestForCorsairVengeanceProController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
int res = bus->i2c_smbus_write_quick(address, I2C_SMBUS_WRITE);
if (res >= 0)
{
pass = true;
res = bus->i2c_smbus_read_byte_data(address, 0x43);
if (res != 0x1C)
{
pass = false;
}
res = bus->i2c_smbus_read_byte_data(address, 0x44);
if (!((res == 0x03) || (res == 0x04)))
{
pass = false;
}
}
Sleep(10);
return(pass);
} /* TestForCorsairVengeanceProController() */
/******************************************************************************************\
* *
* DetectCorsairVengeanceProControllers *
* *
* Detect Corsair Vengeance Pro controllers on the enumerated I2C busses. *
* *
* bus - pointer to i2c_smbus_interface where Aura device is connected *
* dev - I2C address of Aura device *
* *
\******************************************************************************************/
void DetectCorsairVengeanceProControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
CorsairVengeanceProController* new_corsair_pro;
RGBController_CorsairVengeancePro* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// Check for Corsair controller at 0x58
if (TestForCorsairVengeanceProController(busses[bus], 0x58))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x58);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x59
if (TestForCorsairVengeanceProController(busses[bus], 0x59))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x59);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5A
if (TestForCorsairVengeanceProController(busses[bus], 0x5A))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x5A);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5B
if (TestForCorsairVengeanceProController(busses[bus], 0x5B))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x5B);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5C
if (TestForCorsairVengeanceProController(busses[bus], 0x5C))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x5C);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5D
if (TestForCorsairVengeanceProController(busses[bus], 0x5D))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x5D);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5E
if (TestForCorsairVengeanceProController(busses[bus], 0x5E))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x5E);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
// Check for Corsair controller at 0x5F
if (TestForCorsairVengeanceProController(busses[bus], 0x5F))
{
new_corsair_pro = new CorsairVengeanceProController(busses[bus], 0x5F);
new_controller = new RGBController_CorsairVengeancePro(new_corsair_pro);
rgb_controllers.push_back(new_controller);
}
}
} /* DetectCorsairVengeanceProControllers() */
@@ -0,0 +1,150 @@
/*-----------------------------------------*\
| CrucialController.cpp |
| |
| Driver for Crucial Ballistix RGB lighting|
| controller |
| |
| Adam Honse (CalcProgrammer1) 1/19/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include "CrucialController.h"
#include <cstring>
CrucialController::CrucialController(i2c_smbus_interface* bus, crucial_dev_id dev)
{
this->bus = bus;
this->dev = dev;
}
CrucialController::~CrucialController()
{
}
std::string CrucialController::GetDeviceName()
{
return(device_name);
}
std::string CrucialController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
snprintf(addr, 5, "0x%02X", dev);
return_string.append(", address ");
return_string.append(addr);
return(return_string);
}
unsigned int CrucialController::GetLEDCount()
{
return(led_count);
}
void CrucialController::SetMode(unsigned char mode)
{
SendEffectMode(mode, 0x10);
}
void CrucialController::SetAllColorsDirect(RGBColor* colors)
{
SendDirectColors(colors);
}
void CrucialController::SetAllColorsEffect(RGBColor* colors)
{
for(int led_idx = 0; led_idx < 8; led_idx++)
{
unsigned char red = RGBGetRValue(colors[led_idx]);
unsigned char grn = RGBGetGValue(colors[led_idx]);
unsigned char blu = RGBGetBValue(colors[led_idx]);
SendEffectColor(led_idx, red, grn, blu);
}
}
void CrucialController::SendBrightness(unsigned char brightness)
{
CrucialRegisterWrite(0x82EE, 0xFF);
CrucialRegisterWrite(0x82EF, brightness);
CrucialRegisterWrite(0x82F0, 0x83);
}
void CrucialController::SendEffectMode(unsigned char mode, unsigned char speed)
{
CrucialRegisterWrite(0x820F, mode);
CrucialRegisterWrite(0x82EE, 0x00);
CrucialRegisterWrite(0x82EF, speed);
CrucialRegisterWrite(0x82F0, 0x84);
}
void CrucialController::SendDirectColors(RGBColor* color_buf)
{
//Red Channels
CrucialRegisterWrite(0x8300, RGBGetRValue(color_buf[0]));
CrucialRegisterWrite(0x8301, RGBGetRValue(color_buf[1]));
CrucialRegisterWrite(0x8302, RGBGetRValue(color_buf[2]));
CrucialRegisterWrite(0x8303, RGBGetRValue(color_buf[3]));
CrucialRegisterWrite(0x8304, RGBGetRValue(color_buf[4]));
CrucialRegisterWrite(0x8305, RGBGetRValue(color_buf[5]));
CrucialRegisterWrite(0x8306, RGBGetRValue(color_buf[6]));
CrucialRegisterWrite(0x8307, RGBGetRValue(color_buf[7]));
//Green Channels
CrucialRegisterWrite(0x8340, RGBGetGValue(color_buf[0]));
CrucialRegisterWrite(0x8341, RGBGetGValue(color_buf[1]));
CrucialRegisterWrite(0x8342, RGBGetGValue(color_buf[2]));
CrucialRegisterWrite(0x8343, RGBGetGValue(color_buf[3]));
CrucialRegisterWrite(0x8344, RGBGetGValue(color_buf[4]));
CrucialRegisterWrite(0x8345, RGBGetGValue(color_buf[5]));
CrucialRegisterWrite(0x8346, RGBGetGValue(color_buf[6]));
CrucialRegisterWrite(0x8347, RGBGetGValue(color_buf[7]));
//Blue Channels
CrucialRegisterWrite(0x8380, RGBGetBValue(color_buf[0]));
CrucialRegisterWrite(0x8381, RGBGetBValue(color_buf[1]));
CrucialRegisterWrite(0x8382, RGBGetBValue(color_buf[2]));
CrucialRegisterWrite(0x8383, RGBGetBValue(color_buf[3]));
CrucialRegisterWrite(0x8384, RGBGetBValue(color_buf[4]));
CrucialRegisterWrite(0x8385, RGBGetBValue(color_buf[5]));
CrucialRegisterWrite(0x8386, RGBGetBValue(color_buf[6]));
CrucialRegisterWrite(0x8387, RGBGetBValue(color_buf[7]));
}
unsigned char CrucialController::CrucialRegisterRead(crucial_register reg)
{
//Write Crucial register
bus->i2c_smbus_write_word_data(dev, 0x00, ((reg << 8) & 0xFF00) | ((reg >> 8) & 0x00FF));
//Read Crucial value
return(bus->i2c_smbus_read_byte_data(dev, 0x81));
}
void CrucialController::CrucialRegisterWrite(crucial_register reg, unsigned char val)
{
//Write Crucial register
bus->i2c_smbus_write_word_data(dev, 0x00, ((reg << 8) & 0xFF00) | ((reg >> 8) & 0x00FF));
//Write Crucial value
bus->i2c_smbus_write_byte_data(dev, 0x01, val);
}
void CrucialController::SendEffectColor
(
unsigned int led_idx,
unsigned int red,
unsigned int green,
unsigned int blue
)
{
CrucialRegisterWrite(0x82E9, (1 << led_idx));
CrucialRegisterWrite(0x82EA, 0x00);
CrucialRegisterWrite(0x82EB, 0x00);
CrucialRegisterWrite(0x82EC, 0x00);
CrucialRegisterWrite(0x82ED, red);
CrucialRegisterWrite(0x82EE, green);
CrucialRegisterWrite(0x82EF, blue);
CrucialRegisterWrite(0x82F0, 0x01);
}
@@ -0,0 +1,70 @@
/*-----------------------------------------*\
| CrucialController.h |
| |
| Definitions and types for Crucial |
| Ballistix RGB lighting controller |
| |
| Adam Honse (CalcProgrammer1) 1/19/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include "i2c_smbus.h"
#pragma once
typedef unsigned char crucial_dev_id;
typedef unsigned short crucial_register;
enum
{
CRUCIAL_MODE_SHIFT = 0x1F, /* Shift effect mode */
CRUCIAL_MODE_GRADIENT_SHIFT = 0x2F, /* Gradient shift mode */
CRUCIAL_MODE_FILL = 0x3F, /* Fill effect mode */
CRUCIAL_MODE_STACK = 0x4F, /* Stack effect mode */
CRUCIAL_MODE_DOUBLE_STACK = 0x5F, /* Double stack effect mode */
CRUCIAL_MODE_BREATHING = 0x6F, /* Breathing effect mode */
CRUCIAL_MODE_MOTION_POINT = 0x7F, /* Motion point effect mode */
CRUCIAL_MODE_INSIDE_OUT = 0x8F, /* Inside out effect mode */
CRUCIAL_MODE_COLOR_STEP = 0x9F, /* Color step effect mode */
CRUCIAL_MODE_WATER_WAVE = 0xAF, /* Water wave effect mode */
CRUCIAL_MODE_FLASHING = 0xBF, /* Flashing effect mode */
CRUCIAL_MODE_STATIC = 0xCF, /* Static effect mode */
};
class CrucialController
{
public:
CrucialController(i2c_smbus_interface* bus, crucial_dev_id dev);
~CrucialController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned int GetLEDCount();
void SetAllColorsDirect(RGBColor* colors);
void SetAllColorsEffect(RGBColor* colors);
void SetMode(unsigned char mode);
unsigned char CrucialRegisterRead(crucial_register reg);
void CrucialRegisterWrite(crucial_register reg, unsigned char val);
private:
char device_name[16];
unsigned char config_table[64];
unsigned int led_count;
unsigned char channel_cfg;
i2c_smbus_interface * bus;
crucial_dev_id dev;
void SendEffectColor
(
unsigned int led_idx,
unsigned int red,
unsigned int green,
unsigned int blue
);
void SendDirectColors(RGBColor* color_buf);
void SendBrightness(unsigned char brightness);
void SendEffectMode(unsigned char mode, unsigned char speed);
};
@@ -0,0 +1,88 @@
#include "CrucialController.h"
#include "RGBController.h"
#include "RGBController_Crucial.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
/*----------------------------------------------------------------------*\
| This list contains the available SMBus addresses for Crucial RAM |
\*----------------------------------------------------------------------*/
#define CRUCIAL_ADDRESS_COUNT 4
static const unsigned char crucial_addresses[] =
{
0x20,
0x21,
0x22,
0x23
};
/******************************************************************************************\
* *
* TestForCrucialController *
* *
* Tests the given address to see if an Crucial controller exists there. First does a*
* quick write to test for a response, and if so does a simple read at 0xA0 to test *
* for incrementing values 0...F which was observed at this location during data dump *
* *
\******************************************************************************************/
bool TestForCrucialController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
int res = bus->i2c_smbus_write_quick(address, I2C_SMBUS_WRITE);
if (res >= 0)
{
pass = true;
for (int i = 0xA0; i < 0xB0; i++)
{
res = bus->i2c_smbus_read_byte_data(address, i);
if (res != (i - 0xA0))
{
pass = false;
}
}
}
return(pass);
} /* TestForCrucialController() */
/******************************************************************************************\
* *
* DetectCrucialControllers *
* *
* Detect Crucial controllers on the enumerated I2C busses. *
* *
* bus - pointer to i2c_smbus_interface where Aura device is connected *
* dev - I2C address of Aura device *
* *
\******************************************************************************************/
void DetectCrucialControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
CrucialController* new_crucial;
RGBController_Crucial* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// Add Crucial controllers
for (unsigned int address_list_idx = 0; address_list_idx < CRUCIAL_ADDRESS_COUNT; address_list_idx++)
{
if (TestForCrucialController(busses[bus], crucial_addresses[address_list_idx]))
{
new_crucial = new CrucialController(busses[bus], crucial_addresses[address_list_idx]);
new_controller = new RGBController_Crucial(new_crucial);
rgb_controllers.push_back(new_controller);
}
}
}
} /* DetectCrucialControllers() */
+190 -84
View File
@@ -9,6 +9,7 @@
#include <fstream>
#include <iostream>
#include <string>
#include <cstring>
Hue2Controller::Hue2Controller(libusb_device_handle* dev_handle)
{
@@ -19,6 +20,7 @@ Hue2Controller::Hue2Controller(libusb_device_handle* dev_handle)
Hue2Controller::~Hue2Controller()
{
}
unsigned int Hue2Controller::GetStripsOnChannel(unsigned int /*channel*/)
@@ -60,10 +62,23 @@ unsigned int Hue2Controller::GetStripsOnChannel(unsigned int /*channel*/)
case 0x01: //Hue 1 strip
num_leds_on_channel += 10;
break;
case 0x02: //Aer 1 fan
num_leds_on_channel += 8;
break;
case 0x04: //Hue 2 strip
num_leds_on_channel += 10;
break;
case 0x0B: //Aer 2 fan (120mm)
num_leds_on_channel += 8;
break;
case 0x0C: //Aer 2 fan (140mm)
num_leds_on_channel += 8;
break;
default:
break;
}
@@ -73,108 +88,199 @@ unsigned int Hue2Controller::GetStripsOnChannel(unsigned int /*channel*/)
return(ret_val);
}
void Hue2Controller::SetChannelLEDs(unsigned int channel, std::vector<RGBColor> colors)
void Hue2Controller::SetChannelEffect
(
unsigned char channel,
unsigned char mode,
unsigned char speed,
bool direction,
RGBColor * colors,
unsigned int num_colors
)
{
unsigned char usb_buf[] =
{
0x22, 0x10, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
unsigned char usb_apply[] =
{
0x22, 0xA0, 0x01, 0x00,
0x01, 0x00, 0x00, 0x28,
0x00, 0x00, 0x80, 0x00,
0x32, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
};
int actual;
std::size_t pkt_max = 20;
unsigned char color_data[24];
/*-----------------------------------------------------*\
| Set channel in USB packets |
| Fill in color data (up to 8 colors) |
\*-----------------------------------------------------*/
usb_buf[0x02] = channel;
usb_apply[0x02] = channel;
/*-----------------------------------------------------*\
| Send first packet for first 20 LEDs |
\*-----------------------------------------------------*/
if(pkt_max > colors.size())
{
pkt_max = colors.size();
}
for (std::size_t idx = 0; idx < pkt_max; idx++)
for (std::size_t idx = 0; idx < num_colors; idx++)
{
int pixel_idx = idx * 3;
RGBColor color = colors[idx];
usb_buf[pixel_idx + 4] = RGBGetGValue(color);
usb_buf[pixel_idx + 5] = RGBGetRValue(color);
usb_buf[pixel_idx + 6] = RGBGetBValue(color);
color_data[pixel_idx + 0x00] = RGBGetGValue(color);
color_data[pixel_idx + 0x01] = RGBGetRValue(color);
color_data[pixel_idx + 0x02] = RGBGetBValue(color);
}
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
/*-----------------------------------------------------*\
| Send second packet for second 20 LEDs if necessary |
| Send effect packet |
\*-----------------------------------------------------*/
for(int idx = 4; idx < 64; idx++)
{
usb_buf[idx] = 0;
}
usb_buf[0x01] = 0x11;
pkt_max = 20;
SendEffect(channel, mode, speed, direction, num_colors, &color_data[0]);
}
if (colors.size() > 20)
void Hue2Controller::SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
)
{
unsigned char color_data[120];
/*-----------------------------------------------------*\
| Fill in color data (up to 40 colors) |
\*-----------------------------------------------------*/
for (std::size_t idx = 0; idx < num_colors; idx++)
{
pkt_max = colors.size() - 20;
int pixel_idx = idx * 3;
RGBColor color = colors[idx];
color_data[pixel_idx + 0x00] = RGBGetGValue(color);
color_data[pixel_idx + 0x01] = RGBGetRValue(color);
color_data[pixel_idx + 0x02] = RGBGetBValue(color);
}
if(pkt_max > 0)
{
for (std::size_t idx = 0; idx < pkt_max; idx++)
{
int pixel_idx = idx * 3;
RGBColor color = colors[idx + 20];
usb_buf[pixel_idx + 4] = RGBGetGValue(color);
usb_buf[pixel_idx + 5] = RGBGetRValue(color);
usb_buf[pixel_idx + 6] = RGBGetBValue(color);
}
/*-----------------------------------------------------*\
| Send first group of color data |
\*-----------------------------------------------------*/
SendDirect(channel, 0, 20, &color_data[0]);
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
/*-----------------------------------------------------*\
| Send second group of color data if necessary |
\*-----------------------------------------------------*/
if(num_colors > 20)
{
SendDirect(channel, 1, 20, &color_data[60]);
}
/*-----------------------------------------------------*\
| Send apply packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, 0x01, usb_apply, 64, &actual, 0);
SendApply(channel);
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void Hue2Controller::SendApply
(
unsigned char channel
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Apply packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x22;
usb_buf[0x01] = 0xA0;
usb_buf[0x02] = (unsigned char)(1 << channel);
usb_buf[0x04] = 0x01;
usb_buf[0x07] = 0x28;
usb_buf[0x0A] = 0x80;
usb_buf[0x0C] = 0x32;
usb_buf[0x0F] = 0x01;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x81, usb_buf, 64, &actual, 0);
}
void Hue2Controller::SendDirect
(
unsigned char channel,
unsigned char group,
unsigned char color_count,
unsigned char* color_data
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Direct packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x22;
usb_buf[0x01] = 0x10 | group;
usb_buf[0x02] = (unsigned char)(1 << channel);
usb_buf[0x03] = 0x00;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x04], color_data, color_count * 3);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x81, usb_buf, 64, &actual, 0);
}
void Hue2Controller::SendEffect
(
unsigned char channel,
unsigned char mode,
unsigned char speed,
bool direction,
unsigned char color_count,
unsigned char* color_data
)
{
int actual;
unsigned char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Effect packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x28;
usb_buf[0x01] = 0x03;
usb_buf[0x02] = (unsigned char)(1 << channel);
usb_buf[0x03] = 0x28;
/*-----------------------------------------------------*\
| Set mode in USB packet |
\*-----------------------------------------------------*/
usb_buf[0x04] = mode;
/*-----------------------------------------------------*\
| Set speed in USB packet |
\*-----------------------------------------------------*/
usb_buf[0x05] = speed;
/*-----------------------------------------------------*\
| Set direction in USB packet |
\*-----------------------------------------------------*/
usb_buf[0x06] = direction ? 0x01 : 0x00;
/*-----------------------------------------------------*\
| Set color count in USB packet |
\*-----------------------------------------------------*/
usb_buf[0x08] = color_count;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x0A], color_data, color_count * 3);
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x81, usb_buf, 64, &actual, 0);
}
+54 -4
View File
@@ -28,6 +28,15 @@ enum
HUE_2_CHANNEL_4_IDX = 0x01, /* Channel 4 array index */
};
enum
{
HUE_2_SPEED_SLOWEST = 0x00, /* Slowest speed */
HUE_2_SPEED_SLOW = 0x01, /* Slow speed */
HUE_2_SPEED_NORMAL = 0x02, /* Normal speed */
HUE_2_SPEED_FAST = 0x03, /* Fast speed */
HUE_2_SPEED_FASTEST = 0x04, /* Fastest speed */
};
enum
{
HUE_2_MODE_FIXED = 0x00, /* Fixed colors mode */
@@ -46,13 +55,54 @@ class Hue2Controller
public:
Hue2Controller(libusb_device_handle* dev_handle);
~Hue2Controller();
char* GetLEDString();
unsigned int GetStripsOnChannel(unsigned int channel);
void SetChannelLEDs(unsigned int channel, std::vector<RGBColor> colors);
unsigned int GetStripsOnChannel
(
unsigned int channel
);
void SetChannelEffect
(
unsigned char channel,
unsigned char mode,
unsigned char speed,
bool direction,
RGBColor * colors,
unsigned int num_colors
);
void SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
);
unsigned int channel_leds[HUE_2_NUM_CHANNELS];
private:
libusb_device_handle* dev;
void SendApply
(
unsigned char channel
);
void SendDirect
(
unsigned char channel,
unsigned char group,
unsigned char color_count,
unsigned char* color_data
);
void SendEffect
(
unsigned char channel,
unsigned char mode,
unsigned char speed,
bool direction,
unsigned char color_count,
unsigned char* color_data
);
};
@@ -6,6 +6,7 @@
#define NZXT_HUE_2_VID 0x1E71
#define NZXT_HUE_2_PID 0x2001
#define NZXT_SMART_DEVICE_V2_PID 0x2006
/******************************************************************************************\
* *
@@ -21,14 +22,29 @@ void DetectHue2Controllers(std::vector<RGBController*> &rgb_controllers)
libusb_init(&ctx);
//Look for NZXT Hue 2
libusb_device_handle * dev = libusb_open_device_with_vid_pid(ctx, NZXT_HUE_2_VID, NZXT_HUE_2_PID);
libusb_device_handle * hue_2_dev = libusb_open_device_with_vid_pid(ctx, NZXT_HUE_2_VID, NZXT_HUE_2_PID);
if( dev )
if( hue_2_dev )
{
libusb_detach_kernel_driver(dev, 0);
libusb_claim_interface(dev, 0);
libusb_detach_kernel_driver(hue_2_dev, 0);
libusb_claim_interface(hue_2_dev, 0);
Hue2Controller* controller = new Hue2Controller(dev);
Hue2Controller* controller = new Hue2Controller(hue_2_dev);
RGBController_Hue2* rgb_controller = new RGBController_Hue2(controller);
rgb_controllers.push_back(rgb_controller);
}
//Look for NZXT Smart Device V2
libusb_device_handle * smart_dev_2_dev = libusb_open_device_with_vid_pid(ctx, NZXT_HUE_2_VID, NZXT_SMART_DEVICE_V2_PID);
if( smart_dev_2_dev )
{
libusb_detach_kernel_driver(smart_dev_2_dev, 0);
libusb_claim_interface(smart_dev_2_dev, 0);
Hue2Controller* controller = new Hue2Controller(smart_dev_2_dev);
RGBController_Hue2* rgb_controller = new RGBController_Hue2(controller);
@@ -9,7 +9,7 @@
#include <fstream>
#include <iostream>
#include <string>
#include <cstring>
#ifdef WIN32
#include <Windows.h>
@@ -31,84 +31,218 @@ HuePlusController::~HuePlusController()
{
}
void HuePlusController::Initialize(char* port_name)
void HuePlusController::Initialize(char* port)
{
strcpy(led_string, port_name);
strcpy(port_name, port);
serialport = new serial_port(port_name, HUE_PLUS_BAUD);
channel_leds[HUE_PLUS_CHANNEL_1_IDX] = GetStripsOnChannel(HUE_PLUS_CHANNEL_1) * 10;
channel_leds[HUE_PLUS_CHANNEL_2_IDX] = GetStripsOnChannel(HUE_PLUS_CHANNEL_2) * 10;
channel_leds[HUE_PLUS_CHANNEL_1_IDX] = GetLEDsOnChannel(HUE_PLUS_CHANNEL_1);
channel_leds[HUE_PLUS_CHANNEL_2_IDX] = GetLEDsOnChannel(HUE_PLUS_CHANNEL_2);
}
char* HuePlusController::GetLEDString()
char* HuePlusController::GetLocation()
{
return(led_string);
return(port_name);
}
unsigned int HuePlusController::GetStripsOnChannel(unsigned int channel)
unsigned int HuePlusController::GetLEDsOnChannel(unsigned int channel)
{
unsigned char serial_buf[] =
{
0x8D, 0x00, 0x00, 0x00, 0x00
};
unsigned int ret_val = 0;
if (serialport != NULL)
/*-----------------------------------------------------*\
| Set channel in serial packet |
\*-----------------------------------------------------*/
serial_buf[0x01] = channel;
serialport->serial_flush_rx();
serialport->serial_write((char *)serial_buf, 2);
serialport->serial_flush_tx();
Sleep(50);
int bytes_read = serialport->serial_read((char *)serial_buf, 5);
if(bytes_read == 5)
{
unsigned char *serial_buf;
serial_buf = new unsigned char[5];
serial_buf[0] = 0x8D;
serial_buf[1] = channel;
serialport->serial_flush_rx();
serialport->serial_write((char *)serial_buf, 2);
serialport->serial_flush_tx();
Sleep(50);
int bytes_read = serialport->serial_read((char *)serial_buf, 5);
if(bytes_read == 5)
if(serial_buf[3] == 0x01)
{
ret_val = serial_buf[4];
ret_val = serial_buf[4] * 8;
}
else
{
ret_val += serial_buf[4] * 10;
}
delete[] serial_buf;
}
return(ret_val);
}
void HuePlusController::SetChannelLEDs(unsigned int channel, std::vector<RGBColor> colors)
void HuePlusController::SetChannelEffect
(
unsigned char channel,
unsigned char mode,
unsigned char speed,
bool direction,
RGBColor * colors,
unsigned int num_colors
)
{
if (serialport != NULL)
unsigned char color_data[120];
/*-----------------------------------------------------*\
| If mode requires no colors, send packet |
\*-----------------------------------------------------*/
if(num_colors == 0)
{
unsigned char *serial_buf;
serial_buf = new unsigned char[HUE_PLUS_PACKET_SIZE];
serial_buf[0] = 0x4B;
serial_buf[1] = channel;
serial_buf[2] = HUE_PLUS_MODE_FIXED;
serial_buf[3] = 0x00;
serial_buf[4] = 0x00;
for (int i = 5; i < HUE_PLUS_PACKET_SIZE; i++)
/*-----------------------------------------------------*\
| Send mode without color data |
\*-----------------------------------------------------*/
SendPacket(channel, mode, direction, 0, speed, 0, NULL);
}
/*-----------------------------------------------------*\
| If mode requires indexed colors, send color index |
| packets for each mode color |
\*-----------------------------------------------------*/
else if(num_colors <= 8)
{
for(std::size_t color_idx = 0; color_idx < num_colors; color_idx++)
{
serial_buf[i] = 0x00;
/*-----------------------------------------------------*\
| Fill in color data (40 entries per color) |
\*-----------------------------------------------------*/
for (std::size_t idx = 0; idx < 40; idx++)
{
int pixel_idx = idx * 3;
RGBColor color = colors[color_idx];
color_data[pixel_idx + 0x00] = RGBGetGValue(color);
color_data[pixel_idx + 0x01] = RGBGetRValue(color);
color_data[pixel_idx + 0x02] = RGBGetBValue(color);
}
/*-----------------------------------------------------*\
| Send mode and color data |
\*-----------------------------------------------------*/
SendPacket(channel, mode, direction, color_idx, speed, 40, &color_data[0]);
}
}
/*-----------------------------------------------------*\
| If mode requires per-LED colors, fill colors array |
\*-----------------------------------------------------*/
else
{
/*-----------------------------------------------------*\
| Fill in color data (up to 40 colors) |
\*-----------------------------------------------------*/
for (std::size_t idx = 0; idx < num_colors; idx++)
{
int pixel_idx = idx * 3;
RGBColor color = colors[idx];
color_data[pixel_idx + 0x00] = RGBGetGValue(color);
color_data[pixel_idx + 0x01] = RGBGetRValue(color);
color_data[pixel_idx + 0x02] = RGBGetBValue(color);
}
for (unsigned int idx = 0; idx < (colors.size() * 3); idx += 3)
{
int pixel_idx = idx / 3;
RGBColor color = colors[pixel_idx];
serial_buf[idx + 5] = RGBGetGValue(color);
serial_buf[idx + 6] = RGBGetRValue(color);
serial_buf[idx + 7] = RGBGetBValue(color);
}
/*-----------------------------------------------------*\
| Send mode and color data |
\*-----------------------------------------------------*/
SendPacket(channel, mode, direction, 0, speed, num_colors, &color_data[0]);
}
}
serialport->serial_write((char *)serial_buf, HUE_PLUS_PACKET_SIZE);
serialport->serial_flush_tx();
void HuePlusController::SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
)
{
unsigned char color_data[120];
delete[] serial_buf;
/*-----------------------------------------------------*\
| Fill in color data (up to 40 colors) |
\*-----------------------------------------------------*/
for (std::size_t idx = 0; idx < num_colors; idx++)
{
int pixel_idx = idx * 3;
RGBColor color = colors[idx];
color_data[pixel_idx + 0x00] = RGBGetGValue(color);
color_data[pixel_idx + 0x01] = RGBGetRValue(color);
color_data[pixel_idx + 0x02] = RGBGetBValue(color);
}
/*-----------------------------------------------------*\
| Send color data |
\*-----------------------------------------------------*/
SendPacket(channel, HUE_PLUS_MODE_FIXED, false, 0, 0, num_colors, &color_data[0]);
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void HuePlusController::SendPacket
(
unsigned char channel,
unsigned char mode,
bool direction,
unsigned char color_idx,
unsigned char speed,
unsigned char color_count,
unsigned char* color_data
)
{
unsigned char serial_buf[125];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(serial_buf, 0x00, sizeof(serial_buf));
/*-----------------------------------------------------*\
| Set up Direct packet |
\*-----------------------------------------------------*/
serial_buf[0x00] = 0x4B;
/*-----------------------------------------------------*\
| Set channel in serial packet |
\*-----------------------------------------------------*/
serial_buf[0x01] = channel + 1;
/*-----------------------------------------------------*\
| Set mode in serial packet |
\*-----------------------------------------------------*/
serial_buf[0x02] = mode;
/*-----------------------------------------------------*\
| Set options bitfield in serial packet |
\*-----------------------------------------------------*/
serial_buf[0x03] = 0;
serial_buf[0x03] |= direction ? ( 1 << 4 ) : 0;
/*-----------------------------------------------------*\
| Set color index and speed in serial packet |
\*-----------------------------------------------------*/
serial_buf[0x04] = ( color_idx << 5 ) | speed;
/*-----------------------------------------------------*\
| Copy in color data bytes |
\*-----------------------------------------------------*/
memcpy(&serial_buf[0x05], color_data, color_count * 3);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
serialport->serial_write((char *)serial_buf, HUE_PLUS_PACKET_SIZE);
serialport->serial_flush_tx();
/*-----------------------------------------------------*\
| Delay to allow Hue+ device to ready for next packet |
\*-----------------------------------------------------*/
Sleep(20);
}
@@ -41,10 +41,27 @@ enum
enum
{
HUE_PLUS_MODE_FIXED = 0x00, /* Fixed colors mode */
HUE_PLUS_MODE_FADING = 0x01, /* Fading mode */
HUE_PLUS_MODE_SPECTRUM = 0x02, /* Spectrum cycle mode */
HUE_PLUS_NUM_MODES /* Number of Hue Plus modes */
HUE_PLUS_SPEED_SLOWEST = 0x00, /* Slowest speed */
HUE_PLUS_SPEED_SLOW = 0x01, /* Slow speed */
HUE_PLUS_SPEED_NORMAL = 0x02, /* Normal speed */
HUE_PLUS_SPEED_FAST = 0x03, /* Fast speed */
HUE_PLUS_SPEED_FASTEST = 0x04, /* Fastest speed */
};
enum
{
HUE_PLUS_MODE_FIXED = 0x00, /* Fixed colors mode */
HUE_PLUS_MODE_FADING = 0x01, /* Fading mode */
HUE_PLUS_MODE_SPECTRUM = 0x02, /* Spectrum cycle mode */
HUE_PLUS_MODE_MARQUEE = 0x03, /* Marquee mode */
HUE_PLUS_MODE_COVER_MARQUEE = 0x04, /* Cover marquee mode */
HUE_PLUS_MODE_ALTERNATING = 0x05, /* Alternating mode */
HUE_PLUS_MODE_PULSING = 0x06, /* Pulsing mode */
HUE_PLUS_MODE_BREATHING = 0x07, /* Breathing mode */
HUE_PLUS_MODE_ALERT = 0x08, /* Alert mode */
HUE_PLUS_MODE_CANDLELIGHT = 0x09, /* Candlelight mode */
HUE_PLUS_MODE_WINGS = 0x0C, /* Wings mode */
HUE_PLUS_MODE_WAVE = 0x0D, /* Wave mode */
};
class HuePlusController
@@ -53,17 +70,43 @@ public:
HuePlusController();
~HuePlusController();
void Initialize(char* port_name);
char* GetLEDString();
unsigned int GetStripsOnChannel(unsigned int channel);
void SetChannelLEDs(unsigned int channel, std::vector<RGBColor> colors);
void Initialize(char* port);
char* GetLocation();
unsigned int GetLEDsOnChannel(unsigned int channel);
void SetChannelEffect
(
unsigned char channel,
unsigned char mode,
unsigned char speed,
bool direction,
RGBColor * colors,
unsigned int num_colors
);
void SetChannelLEDs
(
unsigned char channel,
RGBColor * colors,
unsigned int num_colors
);
unsigned int channel_leds[HUE_PLUS_NUM_CHANNELS];
private:
char led_string[1024];
char port_name[128];
serial_port *serialport;
char port_name[128];
serial_port *serialport;
void SendPacket
(
unsigned char channel,
unsigned char mode,
bool direction,
unsigned char color_idx,
unsigned char speed,
unsigned char color_count,
unsigned char* color_data
);
};
#endif
@@ -1,27 +1,18 @@
#include "HuePlusController.h"
#include "RGBController.h"
#include "RGBController_HuePlus.h"
#include "find_usb_serial_port.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <string.h>
#include <fstream>
#include <iostream>
#include <string>
#ifndef WIN32
#include <unistd.h>
#include <dirent.h>
#endif
#define NZXT_HUE_PLUS_VID 0x04D8
#define NZXT_HUE_PLUS_PID 0x00DF
/******************************************************************************************\
* *
* DetectHuePlusControllers *
* *
* Detect devices supported by the HuePlus driver *
* * *
* *
\******************************************************************************************/
void DetectHuePlusControllers(std::vector<RGBController*> &rgb_controllers)
@@ -29,60 +20,13 @@ void DetectHuePlusControllers(std::vector<RGBController*> &rgb_controllers)
HuePlusController* new_hueplus;
RGBController_HuePlus* new_controller;
//Get file path in executable directory
std::ifstream infile;
char filename[2048];
char arg1[64];
#ifdef WIN32
GetModuleFileName(NULL, filename, 2048);
strcpy(filename, std::string(filename).substr(0, std::string(filename).find_last_of("\\/")).c_str());
#else
snprintf(arg1, 64, "/proc/%d/exe", getpid());
readlink(arg1, filename, 1024);
strcpy(filename, std::string(filename).substr(0, std::string(filename).find_last_of("\\/")).c_str());
#endif
strcat(filename, "/settings.txt");
//Open settings file
infile.open(filename);
if (infile.good())
std::string portname = find_usb_serial_port(NZXT_HUE_PLUS_VID, NZXT_HUE_PLUS_PID);
if( portname != "" )
{
for (std::string line; std::getline(infile, line); )
{
if (line == "")
{
continue;
}
if ((line[0] != ';') && (line[0] != '#') && (line[0] != '/'))
{
char * argument;
char * value;
new_hueplus = new HuePlusController();
new_hueplus->Initialize((char *)portname.c_str());
value = (char *)line.c_str();
argument = strtok_s(value, "=", &value);
//Strip off new line characters if present
argument = strtok(argument, "\r\n");
value = strtok(value, "\r\n");
if(argument)
{
if (strcmp(argument, "hueplus") == 0)
{
new_hueplus = new HuePlusController();
new_hueplus->Initialize(value);
new_controller = new RGBController_HuePlus(new_hueplus);
rgb_controllers.push_back(new_controller);
}
}
}
}
new_controller = new RGBController_HuePlus(new_hueplus);
rgb_controllers.push_back(new_controller);
}
} /* DetectHuePlusControllers() */
@@ -1,16 +1,16 @@
/*-----------------------------------------*\
| HyperXController.cpp |
| HyperXDRAMController.cpp |
| |
| Definitions and types for HyperX Predator|
| RGB RAM lighting controller |
| and Fury RGB RAM lighting controller |
| |
| Adam Honse (CalcProgrammer1) 6/29/2019 |
\*-----------------------------------------*/
#include "HyperXController.h"
#include "HyperXDRAMController.h"
#include <cstring>
HyperXController::HyperXController(i2c_smbus_interface* bus, hyperx_dev_id dev, unsigned char slots)
HyperXDRAMController::HyperXDRAMController(i2c_smbus_interface* bus, hyperx_dev_id dev, unsigned char slots)
{
this->bus = bus;
this->dev = dev;
@@ -31,17 +31,17 @@ HyperXController::HyperXController(i2c_smbus_interface* bus, hyperx_dev_id dev,
mode = HYPERX_MODE_DIRECT;
}
HyperXController::~HyperXController()
HyperXDRAMController::~HyperXDRAMController()
{
}
std::string HyperXController::GetDeviceName()
std::string HyperXDRAMController::GetDeviceName()
{
return(device_name);
}
std::string HyperXController::GetDeviceLocation()
std::string HyperXDRAMController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
@@ -51,12 +51,12 @@ std::string HyperXController::GetDeviceLocation()
return(return_string);
}
unsigned int HyperXController::GetLEDCount()
unsigned int HyperXDRAMController::GetLEDCount()
{
return(led_count);
}
unsigned int HyperXController::GetSlotCount()
unsigned int HyperXDRAMController::GetSlotCount()
{
unsigned int slot_count = 0;
@@ -71,12 +71,12 @@ unsigned int HyperXController::GetSlotCount()
return(slot_count);
}
unsigned int HyperXController::GetMode()
unsigned int HyperXDRAMController::GetMode()
{
return(mode);
}
void HyperXController::SetEffectColor(unsigned char red, unsigned char green, unsigned char blue)
void HyperXDRAMController::SetEffectColor(unsigned char red, unsigned char green, unsigned char blue)
{
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_APPLY, 0x01);
@@ -89,7 +89,7 @@ void HyperXController::SetEffectColor(unsigned char red, unsigned char green, un
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_APPLY, 0x03);
}
void HyperXController::SetAllColors(unsigned char red, unsigned char green, unsigned char blue)
void HyperXDRAMController::SetAllColors(unsigned char red, unsigned char green, unsigned char blue)
{
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_APPLY, 0x01);
@@ -109,7 +109,7 @@ void HyperXController::SetAllColors(unsigned char red, unsigned char green, unsi
if(mode == HYPERX_MODE_DIRECT)
{
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE3, HYPERX_MODE3_DIRECT);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE_INDEPENDENT, HYPERX_MODE3_DIRECT);
}
for(int led = 0; led < 5; led++)
@@ -126,7 +126,7 @@ void HyperXController::SetAllColors(unsigned char red, unsigned char green, unsi
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_APPLY, 0x03);
}
void HyperXController::SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void HyperXDRAMController::SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
/*-----------------------------------------------------*\
| led_slot - the unmapped slot ID for the given LED |
@@ -175,7 +175,7 @@ void HyperXController::SetLEDColor(unsigned int led, unsigned char red, unsigned
}
void HyperXController::SetLEDColor(unsigned int slot, unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void HyperXDRAMController::SetLEDColor(unsigned int slot, unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char base = slot_base[slot];
unsigned char red_base = base + 0x00;
@@ -194,48 +194,91 @@ void HyperXController::SetLEDColor(unsigned int slot, unsigned int led, unsigned
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_APPLY, 0x03);
}
void HyperXController::SetMode(unsigned char new_mode)
void HyperXDRAMController::SetMode(unsigned char new_mode, bool random, unsigned short new_speed)
{
mode = new_mode;
mode = new_mode;
speed = new_speed;
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_APPLY, 0x01);
/*-----------------------------------------------------*\
| Determine which mode register to use. |
| If set to random color mode, use Mode1. |
| If set to fixed color mode, use Mode2. |
\*-----------------------------------------------------*/
unsigned char mode_reg;
if(random)
{
mode_reg = HYPERX_REG_MODE_RANDOM;
}
else
{
mode_reg = HYPERX_REG_MODE_CUSTOM;
}
switch (mode)
{
case HYPERX_MODE_DIRECT:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE3, HYPERX_MODE3_DIRECT);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE_INDEPENDENT, HYPERX_MODE3_DIRECT);
break;
case HYPERX_MODE_STATIC:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE2, HYPERX_MODE2_STATIC);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE_CUSTOM, HYPERX_MODE2_STATIC);
break;
case HYPERX_MODE_RAINBOW:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE1, HYPERX_MODE1_RAINBOW);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE_RANDOM, HYPERX_MODE1_RAINBOW);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_TIMER_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_TIMER_LSB, speed & 0xFF);
break;
case HYPERX_MODE_COMET:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE2, HYPERX_MODE2_COMET);
bus->i2c_smbus_write_byte_data(dev, mode_reg, HYPERX_MODE2_COMET);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_TIMER_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_TIMER_LSB, speed & 0xFF);
break;
case HYPERX_MODE_HEARTBEAT:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE2, HYPERX_MODE2_HEARTBEAT);
bus->i2c_smbus_write_byte_data(dev, mode_reg, HYPERX_MODE2_HEARTBEAT);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_OFF_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_OFF_TIME_LSB, speed & 0xFF);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_ON_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_ON_TIME_LSB, speed & 0xFF);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_DELAY_TIME_MSB, 0x03);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_DELAY_TIME_LSB, 0xE8);
break;
case HYPERX_MODE_CYCLE:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE1, HYPERX_MODE1_CYCLE);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE_RANDOM, HYPERX_MODE1_CYCLE);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_ON_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_ON_TIME_LSB, speed & 0xFF);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_CHANGE_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_CHANGE_TIME_LSB, speed & 0xFF);
break;
case HYPERX_MODE_BREATHING:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE2, HYPERX_MODE2_BREATHING);
bus->i2c_smbus_write_byte_data(dev, mode_reg, HYPERX_MODE2_BREATHING);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_FADE_IN_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_FADE_IN_TIME_LSB, speed & 0xFF);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_FADE_OUT_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_FADE_OUT_TIME_LSB, speed & 0xFF);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_OFF_TIME_MSB, 0x00);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_OFF_TIME_LSB, 0x00);
break;
case HYPERX_MODE_BOUNCE:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE2, HYPERX_MODE2_BOUNCE);
bus->i2c_smbus_write_byte_data(dev, mode_reg, HYPERX_MODE2_BOUNCE);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_TIMER_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_TIMER_LSB, speed & 0xFF);
break;
case HYPERX_MODE_BLINK:
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_MODE2, HYPERX_MODE2_BLINK);
bus->i2c_smbus_write_byte_data(dev, mode_reg, HYPERX_MODE2_BLINK);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_OFF_TIME_MSB, speed >> 8);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_OFF_TIME_LSB, speed & 0xFF);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_ON_TIME_MSB, 0x07);
bus->i2c_smbus_write_byte_data(dev, HYPERX_REG_ON_TIME_LSB, 0xD4);
break;
}
@@ -1,8 +1,8 @@
/*-----------------------------------------*\
| HyperXController.h |
| HyperXDRAMController.h |
| |
| Definitions and types for HyperX Predator|
| RGB RAM lighting controller |
| and Fury RGB RAM lighting controller |
| |
| Adam Honse (CalcProgrammer1) 6/29/2019 |
\*-----------------------------------------*/
@@ -101,11 +101,25 @@ enum
HYPERX_REG_SLOT3_LED3_BRIGHTNESS = 0xBA, /* Brightness for LED 3, Slot 3 (0-100) */
HYPERX_REG_SLOT3_LED4_BRIGHTNESS = 0xBD, /* Brightness for LED 4, Slot 3 (0-100) */
HYPERX_REG_TIMER_MSB = 0xD1, /* Timer MSB */
HYPERX_REG_TIMER_LSB = 0xD2, /* Timer LSB */
HYPERX_REG_ON_TIME_MSB = 0xD3, /* Effect on time MSB */
HYPERX_REG_ON_TIME_LSB = 0xD4, /* Effect on time LSB */
HYPERX_REG_CHANGE_TIME_MSB = 0xD5, /* Change time MSB */
HYPERX_REG_CHANGE_TIME_LSB = 0xD6, /* Change time LSB */
HYPERX_REG_FADE_IN_TIME_MSB = 0xD7, /* Fade in time MSB */
HYPERX_REG_FADE_IN_TIME_LSB = 0xD8, /* Fade in time LSB */
HYPERX_REG_FADE_OUT_TIME_MSB = 0xD9, /* Fade out time MSB */
HYPERX_REG_FADE_OUT_TIME_LSB = 0xDA, /* Fade out time LSB */
HYPERX_REG_OFF_TIME_MSB = 0xDB, /* Effect off time MSB */
HYPERX_REG_OFF_TIME_LSB = 0xDC, /* Effect off time LSB */
HYPERX_REG_EFFECT_BRIGHTNESS = 0xDD, /* Brightness for effects (0-100) */
HYPERX_REG_APPLY = 0xE1, /* Apply changes register */
HYPERX_REG_MODE1 = 0xE3, /* Mode control register 1 */
HYPERX_REG_MODE2 = 0xE4, /* Mode control register 2 */
HYPERX_REG_MODE3 = 0xE5, /* Mode control register 3 */
HYPERX_REG_MODE_RANDOM = 0xE3, /* Mode control register, random colors */
HYPERX_REG_MODE_CUSTOM = 0xE4, /* Mode control register, custom colors */
HYPERX_REG_MODE_INDEPENDENT = 0xE5, /* Mode control register, independent */
HYPERX_REG_DELAY_TIME_MSB = 0xEA, /* Delay time MSB */
HYPERX_REG_DELAY_TIME_LSB = 0xEB, /* Delay time LSB */
HYPERX_REG_EFFECT_RED = 0xEC, /* Red color register for effects */
HYPERX_REG_EFFECT_GREEN = 0xED, /* Green color register for effects */
HYPERX_REG_EFFECT_BLUE = 0xEE, /* Blue color register for effects */
@@ -146,6 +160,31 @@ enum
HYPERX_NUMBER_MODES /* Number of HyperX modes */
};
enum
{
HYPERX_SPEED_BOUNCE_SLOW = 0x07D0, /* Slowest speed for bounce mode */
HYPERX_SPEED_BOUNCE_NORMAL = 0x07D0, /* Normal speed for bounce mode */
HYPERX_SPEED_BOUNCE_FAST = 0x0064, /* Fastest speed for bounce mode */
HYPERX_SPEED_BREATHING_SLOW = 0x07D0, /* Slowest speed for breathing mode */
HYPERX_SPEED_BREATHING_NORMAL = 0x07D0, /* Normal speed for breathing mode */
HYPERX_SPEED_BREATHING_FAST = 0x0064, /* Fastest speed for breathing mode */
HYPERX_SPEED_CYCLE_SLOW = 0x05DC, /* Slowest speed for cycle mode */
HYPERX_SPEED_CYCLE_NORMAL = 0x05DC, /* Normal speed for cycle mode */
HYPERX_SPEED_CYCLE_FAST = 0x00FA, /* Fastest speed for cycle mode */
HYPERX_SPEED_RAINBOW_SLOW = 0x07D0, /* Slowest speed for rainbow mode */
HYPERX_SPEED_RAINBOW_NORMAL = 0x07D0, /* Normal speed for rainbow mode */
HYPERX_SPEED_RAINBOW_FAST = 0x0064, /* Fastest speed for rainbow mode */
HYPERX_SPEED_BLINK_SLOW = 0x07D0, /* Slowest speed for blink mode */
HYPERX_SPEED_BLINK_NORMAL = 0x07D0, /* Normal speed for blink mode */
HYPERX_SPEED_BLINK_FAST = 0x01F4, /* Fastest speed for blink mode */
HYPERX_SPEED_HEARTBEAT_SLOW = 0x07D0, /* Slowest speed for heartbeat mode */
HYPERX_SPEED_HEARTBEAT_NORMAL = 0x07D0, /* Normal speed for heartbeat mode */
HYPERX_SPEED_HEARTBEAT_FAST = 0x01F4, /* Fastest speed for heartbeat mode */
HYPERX_SPEED_COMET_SLOW = 0x07D0, /* Slowest speed for comet mode */
HYPERX_SPEED_COMET_NORMAL = 0x07D0, /* Normal speed for comet mode */
HYPERX_SPEED_COMET_FAST = 0x0064, /* Fastest speed for comet mode */
};
static const unsigned char slot_base[4] =
{
HYPERX_REG_SLOT0_LED0_RED, /* SPD 0x50 maps to slot 0 */
@@ -154,18 +193,18 @@ static const unsigned char slot_base[4] =
HYPERX_REG_SLOT3_LED0_RED /* SPD 0x53 maps to slot 3 */
};
class HyperXController
class HyperXDRAMController
{
public:
HyperXController(i2c_smbus_interface* bus, hyperx_dev_id dev, unsigned char slots);
~HyperXController();
HyperXDRAMController(i2c_smbus_interface* bus, hyperx_dev_id dev, unsigned char slots);
~HyperXDRAMController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned int GetLEDCount();
unsigned int GetSlotCount();
unsigned int GetMode();
void SetMode(unsigned char new_mode);
void SetMode(unsigned char new_mode, bool random, unsigned short new_speed);
void SetAllColors(unsigned char red, unsigned char green, unsigned char blue);
void SetEffectColor(unsigned char red, unsigned char green, unsigned char blue);
@@ -179,4 +218,5 @@ private:
i2c_smbus_interface* bus;
hyperx_dev_id dev;
unsigned int mode;
unsigned short speed;
};
@@ -1,6 +1,6 @@
#include "HyperXController.h"
#include "HyperXDRAMController.h"
#include "RGBController.h"
#include "RGBController_HyperX.h"
#include "RGBController_HyperXDRAM.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
@@ -19,13 +19,13 @@ static void Sleep(unsigned int milliseconds)
/******************************************************************************************\
* *
* TestForHyperXController *
* TestForHyperXDRAMController *
* *
* Tests the given address to see if a HyperX controller exists there. *
* Tests the given address to see if a HyperX controller exists there. *
* *
\******************************************************************************************/
bool TestForHyperXController(i2c_smbus_interface* bus, unsigned char address)
bool TestForHyperXDRAMController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
@@ -48,31 +48,31 @@ bool TestForHyperXController(i2c_smbus_interface* bus, unsigned char address)
return(pass);
} /* TestForHyperXController() */
} /* TestForHyperXDRAMController() */
/******************************************************************************************\
* *
* DetectHyperXControllers *
* DetectHyperXDRAMControllers *
* *
* Detect HyperX controllers on the enumerated I2C busses. *
* Detect HyperX DRAM controllers on the enumerated I2C busses. *
* *
* bus - pointer to i2c_smbus_interface where Aura device is connected *
* dev - I2C address of Aura device *
* *
\******************************************************************************************/
void DetectHyperXControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
void DetectHyperXDRAMControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers)
{
HyperXController* new_hyperx;
RGBController_HyperX* new_controller;
HyperXDRAMController* new_hyperx;
RGBController_HyperXDRAM* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
unsigned char slots_valid = 0x00;
// Check for HyperX controller at 0x27
if (TestForHyperXController(busses[bus], 0x27))
if (TestForHyperXDRAMController(busses[bus], 0x27))
{
busses[bus]->i2c_smbus_write_byte_data(0x37, 0x00, 0xFF);
@@ -94,11 +94,11 @@ void DetectHyperXControllers(std::vector<i2c_smbus_interface*> &busses, std::vec
if(slots_valid != 0)
{
new_hyperx = new HyperXController(busses[bus], 0x27, slots_valid);
new_controller = new RGBController_HyperX(new_hyperx);
new_hyperx = new HyperXDRAMController(busses[bus], 0x27, slots_valid);
new_controller = new RGBController_HyperXDRAM(new_hyperx);
rgb_controllers.push_back(new_controller);
}
}
}
} /* DetectHyperXControllers() */
} /* DetectHyperXDRAMControllers() */
@@ -0,0 +1,489 @@
/*-----------------------------------------*\
| HyperXKeyboardController.cpp |
| |
| Driver for HyperX RGB Keyboard lighting |
| controller |
| |
| Adam Honse (CalcProgrammer1) 1/30/2020 |
\*-----------------------------------------*/
#include "HyperXKeyboardController.h"
#include <cstring>
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
static unsigned int keys[] = {0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14,
0x15, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1D, 0x1E, 0x20, 0x21, 0x22, 0x23, 0x24,
0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32,
0x33, 0x34, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3E, 0x3F, 0x41, 0x44, 0x45,
0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x51, 0x54, 0x55, 0x58, 0x59,
0x5A, 0x5B, 0x5C, 0x5E, 0x5F, 0x61, 0x64, 0x65, 0x68, 0x69, 0x6A, 0x6B, 0x6C,
0x6E, 0x6F, 0x74, 0x75, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, 0x81,
0x84, 0x85, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x91, 0x94, 0x95 };
static unsigned int extended_red[] = {0x08, 0x48, 0x88, 0x09, 0x89, 0x0A, 0x8A, 0x0B, 0x8B, 0x0C, 0x8C, 0x0D, 0x8D, 0x0E, 0x8F, 0x8E, 0x0F, 0x4F, 0x92, 0x13, 0x93, 0x12 };
static unsigned int extended_grn[] = {0x29, 0x28, 0x78, 0x19, 0x79, 0x1A, 0x7A, 0x1B, 0x7B, 0x1C, 0x7C, 0x1D, 0x7D, 0x1E, 0x6E, 0x7E, 0x1F, 0x6F, 0x82, 0x23, 0x83, 0x22 };
static unsigned int extended_blu[] = {0x39, 0x38, 0x68, 0x3A, 0x69, 0x2A, 0x6A, 0x2B, 0x6B, 0x2C, 0x6C, 0x2D, 0x6D, 0x2E, 0x5E, 0x5D, 0x2F, 0x5F, 0x72, 0x33, 0x73, 0x32 };
HyperXKeyboardController::HyperXKeyboardController(hid_device* dev_handle)
{
dev = dev_handle;
}
HyperXKeyboardController::~HyperXKeyboardController()
{
}
void HyperXKeyboardController::SetMode
(
unsigned char mode,
unsigned char direction,
unsigned char speed,
std::vector<RGBColor> colors
)
{
unsigned char color_mode;
unsigned char mode_colors[9];
active_mode = mode;
active_direction = direction;
active_speed = speed;
memset(mode_colors, 0x00, sizeof(mode_colors));
switch(colors.size())
{
default:
case 0:
color_mode = HYPERX_COLOR_MODE_SPECTRUM;
break;
case 1:
color_mode = HYPERX_COLOR_MODE_SINGLE;
mode_colors[0] = RGBGetRValue(colors[0]);
mode_colors[1] = RGBGetGValue(colors[0]);
mode_colors[2] = RGBGetBValue(colors[0]);
break;
case 2:
color_mode = HYPERX_COLOR_MODE_DUAL;
mode_colors[3] = RGBGetRValue(colors[0]);
mode_colors[4] = RGBGetGValue(colors[0]);
mode_colors[5] = RGBGetBValue(colors[0]);
mode_colors[6] = RGBGetRValue(colors[1]);
mode_colors[7] = RGBGetGValue(colors[1]);
mode_colors[8] = RGBGetBValue(colors[1]);
break;
}
SendEffect
(
0x01,
active_mode,
active_direction,
HYPERX_REACTIVE_MODE_NONE,
active_speed,
color_mode,
mode_colors[0],
mode_colors[1],
mode_colors[2],
mode_colors[3],
mode_colors[4],
mode_colors[5],
mode_colors[6],
mode_colors[7],
mode_colors[8]
);
Sleep(100);
}
void HyperXKeyboardController::SetLEDsDirect(std::vector<RGBColor> colors)
{
unsigned char red_color_data[104];
unsigned char grn_color_data[104];
unsigned char blu_color_data[104];
unsigned char ext_color_data[150];
for(std::size_t i = 0; i < 104; i++)
{
red_color_data[i] = RGBGetRValue(colors[i]);
grn_color_data[i] = RGBGetGValue(colors[i]);
blu_color_data[i] = RGBGetBValue(colors[i]);
}
for(std::size_t i = 0; i < 22; i++)
{
ext_color_data[extended_red[i]] = RGBGetRValue(colors[i + 104]);
ext_color_data[extended_grn[i]] = RGBGetGValue(colors[i + 104]);
ext_color_data[extended_blu[i]] = RGBGetBValue(colors[i + 104]);
}
SendDirect
(
HYPERX_COLOR_CHANNEL_RED,
red_color_data
);
Sleep(5);
SendDirect
(
HYPERX_COLOR_CHANNEL_GREEN,
grn_color_data
);
Sleep(5);
SendDirect
(
HYPERX_COLOR_CHANNEL_BLUE,
blu_color_data
);
Sleep(5);
SendDirectExtended
(
ext_color_data
);
}
void HyperXKeyboardController::SetLEDs(std::vector<RGBColor> colors)
{
unsigned char red_color_data[104];
unsigned char grn_color_data[104];
unsigned char blu_color_data[104];
unsigned char ext_color_data[150];
for(std::size_t i = 0; i < 104; i++)
{
red_color_data[i] = RGBGetRValue(colors[i]);
grn_color_data[i] = RGBGetGValue(colors[i]);
blu_color_data[i] = RGBGetBValue(colors[i]);
}
for(std::size_t i = 0; i < 22; i++)
{
ext_color_data[extended_red[i]] = RGBGetRValue(colors[i + 104]);
ext_color_data[extended_grn[i]] = RGBGetGValue(colors[i + 104]);
ext_color_data[extended_blu[i]] = RGBGetBValue(colors[i + 104]);
}
SendColor
(
0x01,
HYPERX_COLOR_CHANNEL_RED,
red_color_data
);
Sleep(5);
SendColor
(
0x01,
HYPERX_COLOR_CHANNEL_GREEN,
grn_color_data
);
Sleep(5);
SendColor
(
0x01,
HYPERX_COLOR_CHANNEL_BLUE,
blu_color_data
);
Sleep(5);
SendExtendedColor
(
0x01,
ext_color_data
);
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void HyperXKeyboardController::SelectProfile
(
unsigned char profile
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Select Profile packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = 0x01;
buf[0x02] = profile;
buf[0x06] = 0x03;
buf[0x07] = 0x01;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
void HyperXKeyboardController::SendEffect
(
unsigned char profile,
unsigned char mode,
unsigned char direction,
unsigned char reactive_mode,
unsigned char speed,
unsigned char color_mode,
unsigned char red_single,
unsigned char grn_single,
unsigned char blu_single,
unsigned char red_dual_1,
unsigned char grn_dual_1,
unsigned char blu_dual_1,
unsigned char red_dual_2,
unsigned char grn_dual_2,
unsigned char blu_dual_2
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Effect packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = HYPERX_PACKET_ID_SET_EFFECT;
buf[0x02] = profile;
/*-----------------------------------------------------*\
| Set mode |
\*-----------------------------------------------------*/
buf[0x09] = 0x01;
buf[0x0A] = mode;
/*-----------------------------------------------------*\
| Set direction |
\*-----------------------------------------------------*/
buf[0x0D] = direction;
buf[0x0E] = direction;
/*-----------------------------------------------------*\
| Set reactive mode |
\*-----------------------------------------------------*/
buf[0x1B] = reactive_mode;
buf[0x1C] = reactive_mode;
buf[0x1D] = reactive_mode;
buf[0x1E] = reactive_mode;
buf[0x1F] = reactive_mode;
buf[0x20] = reactive_mode;
buf[0x21] = reactive_mode;
buf[0x22] = reactive_mode;
/*-----------------------------------------------------*\
| Set mode-specific colors |
\*-----------------------------------------------------*/
buf[0x29] = red_single;
buf[0x41] = grn_single;
buf[0x59] = blu_single;
buf[0x2A] = red_dual_1;
buf[0x42] = grn_dual_1;
buf[0x5A] = blu_dual_1;
buf[0x2B] = red_dual_2;
buf[0x43] = grn_dual_2;
buf[0x5B] = blu_dual_2;
buf[0x6B] = 0x09;
buf[0x6C] = 0x09;
buf[0x6D] = 0x05;
buf[0x6E] = 0x05;
buf[0x6F] = 0x06;
buf[0x70] = 0x05;
/*-----------------------------------------------------*\
| Set speed |
\*-----------------------------------------------------*/
buf[0x71] = speed;
buf[0x72] = 0x09;
/*-----------------------------------------------------*\
| Set color mode |
\*-----------------------------------------------------*/
buf[0x73] = color_mode;
buf[0x74] = color_mode;
buf[0x75] = color_mode;
buf[0x76] = color_mode;
buf[0x77] = color_mode;
buf[0x78] = color_mode;
buf[0x79] = color_mode;
buf[0x7A] = color_mode;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
void HyperXKeyboardController::SendColor
(
unsigned char profile,
unsigned char color_channel,
unsigned char* color_data
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Color packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = HYPERX_PACKET_ID_SET_COLOR;
buf[0x02] = profile;
buf[0x03] = color_channel;
/*-----------------------------------------------------*\
| Fill in color data |
\*-----------------------------------------------------*/
for(int i = 0; i < 104; i++)
{
buf[keys[i]] = color_data[i];
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
void HyperXKeyboardController::SendExtendedColor
(
unsigned char profile,
unsigned char* color_data
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Color packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = HYPERX_PACKET_ID_SET_COLOR;
buf[0x02] = profile;
buf[0x03] = HYPERX_COLOR_CHANNEL_EXTENDED;
/*-----------------------------------------------------*\
| Fill in color data |
\*-----------------------------------------------------*/
for(int i = 0x08; i <= 0x93; i++)
{
buf[i] = color_data[i];
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
void HyperXKeyboardController::SendDirect
(
unsigned char color_channel,
unsigned char* color_data
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Direct packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = HYPERX_PACKET_ID_DIRECT;
buf[0x02] = color_channel;
/*-----------------------------------------------------*\
| Fill in color data |
\*-----------------------------------------------------*/
for(int i = 0; i < 104; i++)
{
buf[keys[i]] = color_data[i];
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
void HyperXKeyboardController::SendDirectExtended
(
unsigned char* color_data
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Direct packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = HYPERX_PACKET_ID_DIRECT;
buf[0x02] = HYPERX_COLOR_CHANNEL_EXTENDED;
/*-----------------------------------------------------*\
| Fill in color data |
\*-----------------------------------------------------*/
for(int i = 0x08; i <= 0x93; i++)
{
buf[i] = color_data[i];
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
@@ -0,0 +1,135 @@
/*-----------------------------------------*\
| HyperXKeyboardController.h |
| |
| Definitions and types for HyperX RGB |
| Keyboard lighting controller |
| |
| Adam Honse (CalcProgrammer1) 1/30/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
HYPERX_PACKET_ID_SET_EFFECT = 0x02, /* Set profile effect packet */
HYPERX_PACKET_ID_SET_COLOR = 0x06, /* Set profile color packet */
HYPERX_PACKET_ID_DIRECT = 0x16, /* Direct control packet */
};
enum
{
HYPERX_DIRECTION_RIGHT = 0x00,
HYPERX_DIRECTION_LEFT = 0x01,
HYPERX_DIRECTION_UP = 0x02,
HYPERX_DIRECTION_DOWN = 0x03,
HYPERX_DIRECTION_IN = 0x04,
HYPERX_DIRECTION_OUT = 0x05
};
enum
{
HYPERX_MODE_WAVE = 0x00,
HYPERX_MODE_STATIC = 0x01,
HYPERX_MODE_BREATHING = 0x02,
};
enum
{
HYPERX_REACTIVE_MODE_TRIGGER = 0x03,
HYPERX_REACTIVE_MODE_EXPLOSION = 0x04,
HYPERX_REACTIVE_MODE_HYPERX_FLAME = 0x05,
HYPERX_REACTIVE_MODE_NONE = 0xFF
};
enum
{
HYPERX_COLOR_MODE_SINGLE = 0x00,
HYPERX_COLOR_MODE_DUAL = 0x01,
HYPERX_COLOR_MODE_SPECTRUM = 0x02
};
enum
{
HYPERX_COLOR_CHANNEL_RED = 0x01,
HYPERX_COLOR_CHANNEL_GREEN = 0x02,
HYPERX_COLOR_CHANNEL_BLUE = 0x03,
HYPERX_COLOR_CHANNEL_EXTENDED = 0x04
};
class HyperXKeyboardController
{
public:
HyperXKeyboardController(hid_device* dev_handle);
~HyperXKeyboardController();
void SetMode
(
unsigned char mode,
unsigned char direction,
unsigned char speed,
std::vector<RGBColor> colors
);
void SetLEDsDirect(std::vector<RGBColor> colors);
void SetLEDs(std::vector<RGBColor> colors);
private:
hid_device* dev;
unsigned char active_mode;
unsigned char active_direction;
unsigned char active_speed;
void SelectProfile
(
unsigned char profile
);
void SendEffect
(
unsigned char profile,
unsigned char mode,
unsigned char direction,
unsigned char reactive_mode,
unsigned char speed,
unsigned char color_mode,
unsigned char red_single,
unsigned char grn_single,
unsigned char blu_single,
unsigned char red_dual_1,
unsigned char grn_dual_1,
unsigned char blu_dual_1,
unsigned char red_dual_2,
unsigned char grn_dual_2,
unsigned char blu_dual_2
);
void SendColor
(
unsigned char profile,
unsigned char color_channel,
unsigned char* color_data
);
void SendExtendedColor
(
unsigned char profile,
unsigned char* color_data
);
void SendDirect
(
unsigned char color_channel,
unsigned char* color_data
);
void SendDirectExtended
(
unsigned char* color_data
);
};
@@ -0,0 +1,51 @@
#include "HyperXKeyboardController.h"
#include "RGBController.h"
#include "RGBController_HyperXKeyboard.h"
#include <vector>
#include <hidapi/hidapi.h>
#define HYPERX_KEYBOARD_VID 0x0951
#define HYPERX_ALLOY_ELITE_PID 0x16BE
/******************************************************************************************\
* *
* DetectHyperXKeyboardControllers *
* *
* Tests the USB address to see if a HyperX Keyboard controller exists there. *
* *
\******************************************************************************************/
void DetectHyperXKeyboardControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device_info* info;
hid_device* dev = NULL;
hid_init();
info = hid_enumerate(HYPERX_KEYBOARD_VID, HYPERX_ALLOY_ELITE_PID);
//Look for HyperX Keyboard, Interface 2
while(info)
{
if((info->vendor_id == HYPERX_KEYBOARD_VID)
&&(info->product_id == HYPERX_ALLOY_ELITE_PID)
&&(info->interface_number == 2))
{
dev = hid_open_path(info->path);
break;
}
else
{
info = info->next;
}
}
if( dev )
{
HyperXKeyboardController* controller = new HyperXKeyboardController(dev);
RGBController_HyperXKeyboard* rgb_controller = new RGBController_HyperXKeyboard(controller);
rgb_controllers.push_back(rgb_controller);
}
}
@@ -0,0 +1,78 @@
/*-----------------------------------------*\
| MSI3ZoneController.cpp |
| |
| Driver for MSI/Steelseries 3-Zone |
| Keyboard lighting controller |
| |
| Adam Honse (CalcProgrammer1) 12/25/2019 |
\*-----------------------------------------*/
#include "MSI3ZoneController.h"
MSI3ZoneController::MSI3ZoneController(hid_device* dev_handle)
{
dev = dev_handle;
//strcpy(device_name, "MSI 3-Zone Keyboard");
}
MSI3ZoneController::~MSI3ZoneController()
{
}
char* MSI3ZoneController::GetDeviceName()
{
return device_name;
}
void MSI3ZoneController::SetLEDs(std::vector<RGBColor> colors)
{
//Shout out to bparker06 for reverse engineering the MSI keyboard USB protocol!
// https://github.com/bparker06/msi-keyboard/blob/master/keyboard.cpp for original implementation
unsigned char buf[8] = { 0 };
buf[0] = 1;
buf[1] = 2;
buf[2] = 64;
buf[3] = 1;
buf[4] = RGBGetRValue(colors[0]);
buf[5] = RGBGetGValue(colors[0]);
buf[6] = RGBGetBValue(colors[0]);
buf[7] = 236;
hid_send_feature_report(dev, buf, 8);
buf[3] = 2;
buf[4] = RGBGetRValue(colors[1]);
buf[5] = RGBGetGValue(colors[1]);
buf[6] = RGBGetBValue(colors[1]);
hid_send_feature_report(dev, buf, 8);
buf[3] = 3;
buf[4] = RGBGetRValue(colors[2]);
buf[5] = RGBGetGValue(colors[2]);
buf[6] = RGBGetBValue(colors[2]);
hid_send_feature_report(dev, buf, 8);
buf[3] = 4;
buf[4] = RGBGetRValue(colors[3]);
buf[5] = RGBGetGValue(colors[3]);
buf[6] = RGBGetBValue(colors[3]);
hid_send_feature_report(dev, buf, 8);
buf[3] = 5;
hid_send_feature_report(dev, buf, 8);
buf[3] = 6;
hid_send_feature_report(dev, buf, 8);
buf[3] = 7;
hid_send_feature_report(dev, buf, 8);
}
@@ -0,0 +1,30 @@
/*-----------------------------------------*\
| MSI3ZoneController.h |
| |
| Definitions and types for MSI/Steelseries|
| 3-Zone Keyboard lighting controller |
| |
| Adam Honse (CalcProgrammer1) 12/25/2019 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
class MSI3ZoneController
{
public:
MSI3ZoneController(hid_device* dev_handle);
~MSI3ZoneController();
char* GetDeviceName();
void SetLEDs(std::vector<RGBColor> colors);
private:
char device_name[32];
hid_device* dev;
};
@@ -0,0 +1,36 @@
#include "MSI3ZoneController.h"
#include "RGBController.h"
#include "RGBController_MSI3Zone.h"
#include <vector>
#include <hidapi/hidapi.h>
#define MSI_3_ZONE_KEYBOARD_VID 0x1770
#define MSI_3_ZONE_KEYBOARD_PID 0xFF00
/******************************************************************************************\
* *
* DetectMSI3ZoneControllers *
* *
* Tests the USB address to see if an MSI/SteelSeries 3-zone Keyboard controller *
* exists there. *
* *
\******************************************************************************************/
void DetectMSI3ZoneControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device* dev;
//Look for MSI/Steelseries 3-zone Keyboard
hid_init();
dev = hid_open(MSI_3_ZONE_KEYBOARD_VID, MSI_3_ZONE_KEYBOARD_PID, 0);
if( dev )
{
MSI3ZoneController* controller = new MSI3ZoneController(dev);
RGBController_MSI3Zone* rgb_controller = new RGBController_MSI3Zone(controller);
rgb_controllers.push_back(rgb_controller);
}
}
@@ -0,0 +1,394 @@
/*-----------------------------------------*\
| MSIMysticLightController.cpp |
| |
| Driver for MSI Mystic Light USB |
| lighting controller |
| |
| T-bond 3/4/2020 |
\*-----------------------------------------*/
#include "MSIMysticLightController.h"
#include <algorithm>
#include <array>
#include <bitset>
MSIMysticLightController::MSIMysticLightController(hid_device* handle, const char *path)
{
dev = handle;
if(dev)
{
loc = path;
ReadName();
ReadSerial();
ReadFwVersion();
ReadSettings();
}
}
MSIMysticLightController::~MSIMysticLightController()
{
if(dev)
{
hid_close(dev);
}
}
unsigned int MSIMysticLightController::GetZoneMinLedCount(ZONE /*zone*/)
{
return 1u;
}
unsigned int MSIMysticLightController::GetZoneMaxLedCount(ZONE zone)
{
switch (zone)
{
case J_RAINBOW_1:
case J_RAINBOW_2:
case J_CORSAIR:
return 4u; // TODO: It can be different by zone and by mobo
default:
return 1u;
}
}
unsigned int MSIMysticLightController::GetZoneLedCount(ZONE zone)
{
RainbowZoneData *requestedZone = GetRainbowZoneData(zone);
if (!requestedZone)
{
return GetZoneMaxLedCount(zone);
}
return requestedZone->cycle_or_led_num;
}
void MSIMysticLightController::SetZoneLedCount(ZONE zone, unsigned int led_count)
{
RainbowZoneData *requestedZone = GetRainbowZoneData(zone);
if (!requestedZone)
{
return;
}
led_count = std::min(GetZoneMaxLedCount(zone), std::max(GetZoneMinLedCount(zone), led_count));
requestedZone->cycle_or_led_num = led_count;
}
void MSIMysticLightController::SetMode(ZONE zone, EFFECT mode, SPEED speed, BRIGHTNESS brightness, bool rainbow_color)
{
ZoneData* zoneData = GetZoneData(zone);
if(!zoneData)
{
return;
}
zoneData->effect = mode;
zoneData->speedAndBrightnessFlags = (zoneData->speedAndBrightnessFlags & 128u) | brightness << 2u | speed;
zoneData->colorFlags = BitSet(zoneData->colorFlags, !rainbow_color, 7u);
}
std::string MSIMysticLightController::GetDeviceName()
{
return name;
}
std::string MSIMysticLightController::GetFWVersion()
{
return std::string("AP/LD ").append(version_APROM).append(" / ").append(version_LDROM);
}
std::string MSIMysticLightController::GetDeviceLocation()
{
return loc;
}
std::string MSIMysticLightController::GetSerial()
{
return chip_id;
}
bool MSIMysticLightController::ReadSettings()
{
return hid_get_feature_report(dev, reinterpret_cast<unsigned char *>(&data), sizeof data) == sizeof data;
}
bool MSIMysticLightController::Update()
{
return hid_send_feature_report(dev, reinterpret_cast<unsigned char *>(&data), sizeof data) == sizeof data;
}
void MSIMysticLightController::SaveOnUpdate(bool save)
{
data.save_data = save;
}
void MSIMysticLightController::SetZoneColor(ZONE zone, unsigned char r1, unsigned char g1, unsigned char b1, unsigned char r2, unsigned char g2, unsigned char b2)
{
ZoneData* zoneData = GetZoneData(zone);
if(!zoneData)
{
return;
}
zoneData->color.R = r1;
zoneData->color.G = g1;
zoneData->color.B = b1;
zoneData->color2.R = r2;
zoneData->color2.G = g2;
zoneData->color2.B = b2;
}
std::pair<Color, Color> MSIMysticLightController::GetZoneColor(ZONE zone)
{
ZoneData *zoneData = GetZoneData(zone);
if (!zoneData)
{
return std::make_pair(Color{}, Color{});
}
return std::make_pair(Color{
zoneData->color.R,
zoneData->color.G,
zoneData->color.B},
Color{zoneData->color2.R, zoneData->color2.G, zoneData->color2.B});
}
ZoneData *MSIMysticLightController::GetZoneData(ZONE zone)
{
switch (zone)
{
case J_RGB_1:
return &data.j_rgb_1;
case J_RGB_2:
return &data.j_rgb_2;
case J_RAINBOW_1:
return &data.j_rainbow_1;
case J_RAINBOW_2:
return &data.j_rainbow_2;
case J_PIPE_1:
return &data.j_pipe_1;
case J_PIPE_2:
return &data.j_pipe_2;
case ON_BOARD_LED:
return &data.on_board_led;
case ON_BOARD_LED_1:
return &data.on_board_led_1;
case ON_BOARD_LED_2:
return &data.on_board_led_2;
case ON_BOARD_LED_3:
return &data.on_board_led_3;
case ON_BOARD_LED_4:
return &data.on_board_led_4;
case ON_BOARD_LED_5:
return &data.on_board_led_5;
case ON_BOARD_LED_6:
return &data.on_board_led_6;
case ON_BOARD_LED_7:
return &data.on_board_led_7;
case ON_BOARD_LED_8:
return &data.on_board_led_8;
case ON_BOARD_LED_9:
return &data.on_board_led_9;
case J_CORSAIR_OUTERLL120:
return &data.j_corsair_outerll120;
default:
case J_CORSAIR:
break;
}
return nullptr;
}
RainbowZoneData *MSIMysticLightController::GetRainbowZoneData(ZONE zone)
{
switch (zone)
{
case J_RAINBOW_1:
return &data.j_rainbow_1;
case J_RAINBOW_2:
return &data.j_rainbow_2;
case J_CORSAIR:
default:
return nullptr;
}
}
bool MSIMysticLightController::ReadFwVersion()
{
// First read the APROM
// Checksum also available at report ID 180, with highCheksum stored at index 8, and low at 9
int num = 1;
unsigned char request[64] = {1, 176};
unsigned char response[64];
std::fill_n(request + 2, sizeof request - 2, 204);
num &= hid_write(dev, request, 64);
num &= hid_read(dev, response, 64);
unsigned char highValue = response[2] >> 4;
unsigned char lowValue = response[2] & 15;
version_APROM = std::to_string(static_cast<int>(highValue)).append(".").append(std::to_string(static_cast<int>(lowValue)));
// Now read the LDROM
// Checksum also available at report ID 184, with highCheksum stored at index 8, and low at 9
request[1] = 182u;
num &= hid_write(dev, request, 64);
num &= hid_read(dev, response, 64);
highValue = response[2] >> 4u;
lowValue = response[2] & 15u;
version_LDROM = std::to_string(static_cast<int>(highValue)).append(".").append(std::to_string(static_cast<int>(lowValue)));
return num == 1;
}
void MSIMysticLightController::ReadSerial()
{
wchar_t serial[256];
hid_get_serial_number_string(dev, serial, 256);
std::wstring wserial = std::wstring(serial);
chip_id = std::string(wserial.begin(), wserial.end());
}
void MSIMysticLightController::ReadName()
{
wchar_t tname[256];
hid_get_manufacturer_string(dev, tname, 256);
std::wstring wname = std::wstring(tname);
name = std::string(wname.begin(), wname.end());
hid_get_product_string(dev, tname, 256);
wname = std::wstring(tname);
name.append(" ").append(std::string(wname.begin(), wname.end()));
}
void MSIMysticLightController::SetDeviceSettings(bool is_fan, FAN_TYPE fan_type,
unsigned char corsair_device_quantity,
bool is_LL120Outer_individual)
{
// If is_fan false, it is a stripe
CorsairZoneData &settingsZone = data.j_corsair;
settingsZone.fan_flags = (settingsZone.fan_flags & 128u) | fan_type << 1u | is_fan;
settingsZone.corsair_quantity = corsair_device_quantity << 2u;
settingsZone.is_individual = BitSet(settingsZone.is_individual, is_LL120Outer_individual, 0u);
}
bool MSIMysticLightController::SetVolume(unsigned char main, unsigned char left, unsigned char right)
{
unsigned char packet[64];
std::fill_n(packet, sizeof packet, 204u);
if(main > 100u)
{
main = 100u;
}
if(left > 100u)
{
left = 100u;
}
if(right > 100u)
{
right = 100u;
}
packet[0] = 1u;
packet[1] = 192u;
packet[3] = main;
packet[4] = left;
packet[5] = right;
return hid_write(dev, packet, sizeof packet);
}
void MSIMysticLightController::SetBoardSyncSettings(bool onboard_sync, bool combine_JRGB, bool combine_JPIPE1,
bool combine_JPIPE2, bool combine_JRAINBOW1, bool combine_JRAINBOW2,
bool combine_crossair)
{
ZoneData &syncZone = data.on_board_led;
syncZone.colorFlags = BitSet(syncZone.colorFlags, onboard_sync, 0u);
syncZone.colorFlags = BitSet(syncZone.colorFlags, combine_JRAINBOW1, 1u);
syncZone.colorFlags = BitSet(syncZone.colorFlags, combine_JRAINBOW2, 2u);
syncZone.colorFlags = BitSet(syncZone.colorFlags, combine_crossair, 3u);
syncZone.colorFlags = BitSet(syncZone.colorFlags, combine_JPIPE1, 4u);
syncZone.colorFlags = BitSet(syncZone.colorFlags, combine_JPIPE2, 5u);
syncZone.speedAndBrightnessFlags = BitSet(syncZone.speedAndBrightnessFlags, combine_JRGB, 7u);
}
void MSIMysticLightController::GetMode(ZONE zone, EFFECT &mode, SPEED &speed, BRIGHTNESS &brightness, bool &rainbow_color)
{
ZoneData *zoneData = GetZoneData(zone);
if (!zoneData)
{
return;
}
mode = static_cast<EFFECT>(zoneData->effect);
speed = static_cast<SPEED>(zoneData->speedAndBrightnessFlags & 3u);
brightness = static_cast<BRIGHTNESS>((zoneData->speedAndBrightnessFlags >> 2u) & 31u);
rainbow_color = (zoneData->colorFlags & 128u) >> 7u;
}
unsigned char MSIMysticLightController::BitSet(unsigned char value, bool bit, unsigned int position)
{
return static_cast<unsigned char>(std::bitset<8>(value).set(position, bit).to_ulong());
}
void MSIMysticLightController::SetCycleCount(ZONE zone, unsigned char cycle_num)
{
RainbowZoneData *requestedZone = GetRainbowZoneData(zone);
if (!requestedZone)
{
return;
}
requestedZone->cycle_or_led_num = cycle_num;
}
unsigned char MSIMysticLightController::GetCycleCount(ZONE zone)
{
RainbowZoneData *requestedZone = GetRainbowZoneData(zone);
if (!requestedZone)
{
return 0;
}
return requestedZone->cycle_or_led_num;
}
void MSIMysticLightController::GetBoardSyncSettings(bool &onboard_sync, bool &combine_JRGB, bool &combine_JPIPE1,
bool &combine_JPIPE2, bool &combine_JRAINBOW1,
bool &combine_JRAINBOW2, bool &combine_crossair)
{
ZoneData &syncZone = data.on_board_led;
onboard_sync = syncZone.colorFlags & 1u;
combine_JRAINBOW1 = syncZone.colorFlags >> 1u & 1u;
combine_JRAINBOW2 = syncZone.colorFlags >> 1u & 1u;
combine_crossair = syncZone.colorFlags >> 3u & 1u;
combine_JPIPE1 = syncZone.colorFlags >> 4u & 1u;
combine_JPIPE2 = syncZone.colorFlags >> 5u & 1u;
combine_JRGB = (syncZone.speedAndBrightnessFlags & 128u) >> 7u;
}
void MSIMysticLightController::GetDeviceSettings(bool &stripe_or_fan, FAN_TYPE &fan_type,
unsigned char &corsair_device_quantity,
bool &is_LL120Outer_individual)
{
CorsairZoneData &settingsZone = data.j_corsair;
stripe_or_fan = settingsZone.fan_flags & 1u;
fan_type = static_cast<FAN_TYPE >((settingsZone.fan_flags & 14u) >> 1u);
corsair_device_quantity = (settingsZone.corsair_quantity & 252u) >> 2u;
is_LL120Outer_individual = settingsZone.is_individual & 1u;
}
@@ -0,0 +1,228 @@
/*-----------------------------------------*\
| MSIMysticLightController.h |
| |
| Definitions and types for MSI Mystic |
| Light USB lighting controllers |
| |
| T-bond 3/4/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <cstring>
#include <hidapi/hidapi.h>
#include <limits>
#pragma once
enum ZONE
{
J_RGB_1 = 1,
J_RGB_2 = 174,
J_PIPE_1 = 11,
J_PIPE_2 = 21,
J_RAINBOW_1 = 31,
J_RAINBOW_2 = 42,
J_CORSAIR = 53,
J_CORSAIR_OUTERLL120 = 64,
ON_BOARD_LED = 74,
ON_BOARD_LED_1 = 84,
ON_BOARD_LED_2 = 94,
ON_BOARD_LED_3 = 104,
ON_BOARD_LED_4 = 114,
ON_BOARD_LED_5 = 124,
ON_BOARD_LED_6 = 134,
ON_BOARD_LED_7 = 144,
ON_BOARD_LED_8 = 154,
ON_BOARD_LED_9 = 164
};
struct ZoneDescription
{
std::string name;
ZONE value;
};
enum EFFECT
{
DISABLE,
STATIC,
BREATHING,
FLASHING,
DOUBLE_FLASHING,
LIGHTNING,
MSI_MARQUEE,
METEOR,
WATER_DROP,
MSI_RAINBOW,
POP,
RAP,
JAZZ,
PLAY,
MOVIE,
COLOR_RING,
PLANETARY,
DOUBLE_METEOR,
ENERGY,
BLINK,
CLOCK,
COLOR_PULSE,
COLOR_SHIFT,
COLOR_WAVE,
MARQUEE,
RAINBOW,
RAINBOW_WAVE,
VISOR,
JRAINBOW,
RAINBOW_FLASHING,
RAINBOW_DOUBLE_FLASHING,
RANDOM,
FAN_CONTROL,
DISABLE_2,
COLOR_RING_FLASHING,
COLOR_RING_DOUBLE_FLASHING,
STACK,
CORSAIR_QUE,
FIRE,
LAVA
};
enum SPEED
{
LOW,
MEDIUM,
HIGH
};
enum FAN_TYPE
{
SP,
HD,
LL
};
enum BRIGHTNESS
{
OFF,
LEVEL_10,
LEVEL_20,
LEVEL_30,
LEVEL_40,
LEVEL_50,
LEVEL_60,
LEVEL_70,
LEVEL_80,
LEVEL_90,
LEVEL_100
};
struct Color
{
unsigned char R;
unsigned char G;
unsigned char B;
};
struct CorsairZoneData
{
unsigned char effect = EFFECT::STATIC;
Color color { std::numeric_limits<unsigned char>::max(), 0, 0 };
unsigned char fan_flags = 40;
unsigned char corsair_quantity;
unsigned char padding[3];
unsigned char is_individual = 0;
};
struct ZoneData
{
unsigned char effect = EFFECT::STATIC;
Color color { std::numeric_limits<unsigned char>::max(), 0u, 0u };
unsigned char speedAndBrightnessFlags = 40u;
Color color2 { 0, std::numeric_limits<unsigned char>::max(), 0u };
unsigned char colorFlags = 128u;
const unsigned char padding = 0u;
};
struct RainbowZoneData : ZoneData
{
unsigned char cycle_or_led_num = 20u;
};
struct FeaturePacket
{
const unsigned char report_id = 82u; // Report ID
ZoneData j_rgb_1; // 1
ZoneData j_pipe_1; // 11
ZoneData j_pipe_2; // 21
RainbowZoneData j_rainbow_1; // 31
RainbowZoneData j_rainbow_2; // 42
CorsairZoneData j_corsair; // 53
ZoneData j_corsair_outerll120; // 64
ZoneData on_board_led; // 74
ZoneData on_board_led_1; // 84
ZoneData on_board_led_2; // 94
ZoneData on_board_led_3; // 104
ZoneData on_board_led_4; // 114
ZoneData on_board_led_5; // 124
ZoneData on_board_led_6; // 134
ZoneData on_board_led_7; // 144
ZoneData on_board_led_8; // 154
ZoneData on_board_led_9; // 164
ZoneData j_rgb_2; // 174
unsigned char save_data = 0u; // 184
};
class MSIMysticLightController
{
public:
MSIMysticLightController(hid_device* handle, const char *path);
~MSIMysticLightController();
unsigned int GetZoneMinLedCount(ZONE zone);
unsigned int GetZoneMaxLedCount(ZONE zone);
unsigned int GetZoneLedCount(ZONE zone);
void SetZoneLedCount(ZONE zone, unsigned int led_count);
void SetMode(ZONE zone, EFFECT mode, SPEED speed, BRIGHTNESS brightness, bool rainbow_color);
void GetMode(ZONE zone, EFFECT &mode, SPEED &speed, BRIGHTNESS &brightness, bool &rainbow_color);
void SetZoneColor(ZONE zone, unsigned char r1, unsigned char g1, unsigned char b1, unsigned char r2, unsigned char g2, unsigned char b2);
void SetCycleCount(ZONE zone, unsigned char cycle_num);
unsigned char GetCycleCount(ZONE zone);
std::pair<Color, Color>
GetZoneColor(ZONE zone);
bool Update();
void SetDeviceSettings(bool stripe_or_fan, FAN_TYPE fan_type, unsigned char corsair_device_quantity, bool is_LL120Outer_individual);
void GetDeviceSettings(bool &stripe_or_fan, FAN_TYPE &fan_type, unsigned char &corsair_device_quantity, bool &is_LL120Outer_individual);
bool SetVolume(unsigned char main, unsigned char left, unsigned char right);
void SetBoardSyncSettings(bool onboard_sync, bool combine_JRGB, bool combine_JPIPE1, bool combine_JPIPE2, bool combine_JRAINBOW1, bool combine_JRAINBOW2, bool combine_crossair);
void GetBoardSyncSettings(bool &onboard_sync, bool &combine_JRGB, bool &combine_JPIPE1, bool &combine_JPIPE2, bool &combine_JRAINBOW1, bool &combine_JRAINBOW2, bool &combine_crossair);
std::string GetDeviceName();
std::string GetDeviceLocation();
std::string GetFWVersion();
std::string GetSerial();
private:
bool ReadSettings();
void SaveOnUpdate(bool send);
bool ReadFwVersion();
void ReadSerial();
void ReadName();
ZoneData* GetZoneData(ZONE zone);
RainbowZoneData*
GetRainbowZoneData(ZONE zone);
static unsigned char BitSet(unsigned char value, bool bit, unsigned int position);
hid_device* dev;
std::string name;
std::string loc;
std::string version_APROM;
std::string version_LDROM;
std::string chip_id;
FeaturePacket data;
};
@@ -0,0 +1,90 @@
#include "MSIMysticLightController.h"
#include "RGBController_MSIMysticLight.h"
#include <algorithm>
#define MSI_VID 0x1462
constexpr unsigned short SupportedPIDs[41] =
{
31847, // MS_7C67
31504, // MS_7B10
31879, // MS_7C87
31635, // MS_7B93
31796, // MS_7C34
31797, // MS_7C35
31798, // MS_7C36
31799, // MS_7C37
31810, // MS_7C42
31876, // MS_7C84
31636, // MS_7B94
31638, // MS_7B96
31833, // MS_7C59
31840, // MS_7C60
31856, // MS_7C70
31857, // MS_7C71
31859, // MS_7C73
31861, // MS_7C75
31862, // MS_7C76
31863, // MS_7C77
31865, // MS_7C79
31872, // MS_7C80
31896, // MS_7C98
31897, // MS_7C99
31873, // MS_7C81
31874, // MS_7C82
31875, // MS_7C83
31877, // MS_7C85
31878, // MS_7C86
31880, // MS_7C88
31881, // MS_7C89
17497, // MS_4459
16036, // MS_3EA4
36957, // MS_905D
31888, // MS_7C90
31889, // MS_7C91
31890, // MS_7C92
31892, // MS_7C94
31893, // MS_7C95
31894, // MS_7C96
31830 // MS_7C56
};
/******************************************************************************************\
* *
* DetectMSIMysticLightControllers *
* *
* Detect MSI Mystic Light devices that use NCT6775 RGB controllers *
* *
\******************************************************************************************/
void DetectMSIMysticLightControllers(std::vector<RGBController*> &rgb_controllers)
{
if(hid_init() < 0)
{
return;
}
hid_device_info * device_list = hid_enumerate(MSI_VID, 0);
if(!device_list)
{
return;
}
hid_device_info * device = device_list;
while(device)
{
if(std::find(std::begin(SupportedPIDs), std::end(SupportedPIDs), device->product_id) != std::end(SupportedPIDs))
{
hid_device * dev = hid_open_path(device->path);
if(dev)
{
MSIMysticLightController * controller = new MSIMysticLightController(dev, device_list->path);
RGBController_MSIMysticLight * rgb_controller = new RGBController_MSIMysticLight(controller);
rgb_controllers.push_back(rgb_controller);
}
}
device = device->next;
}
hid_free_enumeration(device_list);
}
@@ -0,0 +1,99 @@
/*-----------------------------------------*\
| MSIRGBController.cpp |
| |
| Driver for MSI-RGB lighting controller |
| |
| Logic adapted from: |
| https://github.com/nagisa/msi-rgb |
| |
| Adam Honse (CalcProgrammer1) 2/11/2020 |
\*-----------------------------------------*/
#include "MSIRGBController.h"
#include "super_io.h"
MSIRGBController::MSIRGBController(int sioaddr)
{
msi_sioaddr = sioaddr;
/*-----------------------------------------------------*\
| This setup step isn't well documented |
| Without this, pulsing does not work |
\*-----------------------------------------------------*/
superio_outb(msi_sioaddr, SIO_REG_LOGDEV, 0x09);
int val_at_2c = superio_inb(msi_sioaddr, 0x2C);
val_at_2c &= 0b11110111;
val_at_2c |= 0b00010000;
superio_outb(msi_sioaddr, 0x2C, val_at_2c);
/*-----------------------------------------------------*\
| Set logical device register to RGB controller |
\*-----------------------------------------------------*/
superio_outb(msi_sioaddr, SIO_REG_LOGDEV, MSI_SIO_LOGDEV_RGB);
/*-----------------------------------------------------*\
| Test if RGB is enabled. If it is not, enable it. |
\*-----------------------------------------------------*/
int enable = superio_inb(msi_sioaddr, MSI_SIO_RGB_REG_ENABLE);
if((enable & MSI_SIO_RGB_ENABLE_MASK) != MSI_SIO_RGB_ENABLE_MASK)
{
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_ENABLE, MSI_SIO_RGB_ENABLE_MASK & (enable & !MSI_SIO_RGB_ENABLE_MASK));
}
/*-----------------------------------------------------*\
| Lighting enabled, no pulsing or blinking |
\*-----------------------------------------------------*/
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_CFG_1, 0x00);
/*-----------------------------------------------------*\
| Lighting enabled, RGB non-inverted, header on |
\*-----------------------------------------------------*/
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_CFG_3, 0xE2);
}
MSIRGBController::~MSIRGBController()
{
}
void MSIRGBController::SetColor(unsigned char red, unsigned char green, unsigned char blue)
{
/*-----------------------------------------------------*\
| The MSI RGB controller uses 4 bits per color rather |
| than 8. Shift the values by 4 so that the 4 most |
| significant bits of each color are the new color value|
\*-----------------------------------------------------*/
red = red >> 4;
green = green >> 4;
blue = blue >> 4;
/*-----------------------------------------------------*\
| Set logical device register to RGB controller |
\*-----------------------------------------------------*/
superio_outb(msi_sioaddr, SIO_REG_LOGDEV, MSI_SIO_LOGDEV_RGB);
/*-----------------------------------------------------*\
| Write the colors to the color sequence registers |
| Only static mode is supported right now - all colors |
| are the same. |
\*-----------------------------------------------------*/
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_RED_1_0, (red | (red << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_RED_3_2, (red | (red << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_RED_5_4, (red | (red << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_RED_7_6, (red | (red << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_GREEN_1_0, (green | (green << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_GREEN_3_2, (green | (green << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_GREEN_5_4, (green | (green << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_GREEN_7_6, (green | (green << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_BLUE_1_0, (blue | (blue << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_BLUE_3_2, (blue | (blue << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_BLUE_5_4, (blue | (blue << 4)));
superio_outb(msi_sioaddr, MSI_SIO_RGB_REG_BLUE_7_6, (blue | (blue << 4)));
}
@@ -0,0 +1,56 @@
/*-----------------------------------------*\
| MSIRGBController.h |
| |
| Definitions and types for MSI-RGB |
| lighting controller |
| |
| Logic adapted from: |
| https://github.com/nagisa/msi-rgb |
| |
| Adam Honse (CalcProgrammer1) 2/11/2020 |
\*-----------------------------------------*/
#include <string>
#pragma once
#define MSI_SIO_LOGDEV_RGB 0x12
enum
{
MSI_SIO_RGB_REG_ENABLE = 0xE0,
MSI_SIO_RGB_REG_CFG_1 = 0xE4,
MSI_SIO_RGB_REG_RED_1_0 = 0xF0,
MSI_SIO_RGB_REG_RED_3_2 = 0xF1,
MSI_SIO_RGB_REG_RED_5_4 = 0xF2,
MSI_SIO_RGB_REG_RED_7_6 = 0xF3,
MSI_SIO_RGB_REG_GREEN_1_0 = 0xF4,
MSI_SIO_RGB_REG_GREEN_3_2 = 0xF5,
MSI_SIO_RGB_REG_GREEN_5_4 = 0xF6,
MSI_SIO_RGB_REG_GREEN_7_6 = 0xF7,
MSI_SIO_RGB_REG_BLUE_1_0 = 0xF8,
MSI_SIO_RGB_REG_BLUE_3_2 = 0xF9,
MSI_SIO_RGB_REG_BLUE_5_4 = 0xFA,
MSI_SIO_RGB_REG_BLUE_7_6 = 0xFB,
MSI_SIO_RGB_REG_CFG_2 = 0xFE,
MSI_SIO_RGB_REG_CFG_3 = 0xFF,
};
#define MSI_SIO_RGB_ENABLE_MASK 0xE0
class MSIRGBController
{
public:
MSIRGBController(int sioaddr);
~MSIRGBController();
std::string GetDeviceName();
std::string GetDeviceLocation();
unsigned int GetMode();
void SetMode(unsigned char new_mode, unsigned char new_speed);
void SetColor(unsigned char red, unsigned char green, unsigned char blue);
private:
int msi_sioaddr;
};
@@ -0,0 +1,40 @@
#include "MSIRGBController.h"
#include "RGBController.h"
#include "RGBController_MSIRGB.h"
#include "super_io.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
/******************************************************************************************\
* *
* DetectMSIRGBControllers *
* *
* Detect MSI-RGB compatible Super-IO chips. *
* *
\******************************************************************************************/
void DetectMSIRGBControllers(std::vector<RGBController*> &rgb_controllers)
{
int sio_addrs[2] = {0x2E, 0x4E};
for(int sioaddr_idx = 0; sioaddr_idx < 2; sioaddr_idx++)
{
int sioaddr = sio_addrs[sioaddr_idx];
superio_enter(sioaddr);
int val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) | superio_inb(sioaddr, SIO_REG_DEVID + 1);
switch (val & SIO_ID_MASK)
{
case SIO_NCT6795_ID:
case SIO_NCT6797_ID:
MSIRGBController* new_msi = new MSIRGBController(sioaddr);
RGBController_MSIRGB* new_rgb = new RGBController_MSIRGB(new_msi);
rgb_controllers.push_back(new_rgb);
break;
}
}
} /* DetectMSIRGBControllers() */
@@ -0,0 +1,166 @@
/*---------------------------------------------------------*\
| Driver for NZXT Kraken |
| |
| Martin Hartl (inlart), 04/04/2020 |
\*---------------------------------------------------------*/
#include "NZXTKrakenController.h"
#include <string>
#include <sstream>
#include <cstring>
const int NZXT_KRAKEN_READ_ENDPOINT = 0x81;
const int NZXT_KRAKEN_WRITE_ENDPOINT = 0x01;
static void SetColor(const std::vector<RGBColor>& colors, unsigned char* color_data)
{
for (std::size_t idx = 0; idx < colors.size(); idx++)
{
int pixel_idx = idx * 3;
RGBColor color = colors[idx];
color_data[pixel_idx + 0x00] = RGBGetRValue(color);
color_data[pixel_idx + 0x01] = RGBGetGValue(color);
color_data[pixel_idx + 0x02] = RGBGetBValue(color);
}
}
static RGBColor ToLogoColor(RGBColor rgb)
{
return ToRGBColor(RGBGetGValue(rgb), RGBGetRValue(rgb), RGBGetBValue(rgb));
}
NZXTKrakenController::NZXTKrakenController(libusb_device_handle* dev_handle)
{
dev = dev_handle;
/*-----------------------------------------------------*\
| Get the firmware version |
\*-----------------------------------------------------*/
UpdateStatus();
}
NZXTKrakenController::~NZXTKrakenController()
{
}
std::string NZXTKrakenController::GetFirmwareVersion()
{
return firmware_version;
}
void NZXTKrakenController::UpdateStatus()
{
int actual;
unsigned char usb_buf[64];
memset(usb_buf, 0, sizeof(usb_buf));
libusb_interrupt_transfer(dev, NZXT_KRAKEN_READ_ENDPOINT, usb_buf, sizeof(usb_buf), &actual, 0);
/*-----------------------------------------------------*\
| Extract cooler information |
\*-----------------------------------------------------*/
liquid_temperature = usb_buf[0x1] + (usb_buf[0x2] * 0.1);
fan_speed = usb_buf[0x3] << 8 | usb_buf[0x4];
pump_speed = usb_buf[0x5] << 8 | usb_buf[0x6];
/*-----------------------------------------------------*\
| Extract firmware version |
\*-----------------------------------------------------*/
int major = usb_buf[0xb];
int minor = usb_buf[0xc] << 8 | usb_buf[0xd];
int patch = usb_buf[0xe];
std::stringstream ss;
ss << major << '.' << minor << '.' << patch;
firmware_version = ss.str();
}
void NZXTKrakenController::UpdateEffect
(
NZXTKrakenChannel_t channel,
unsigned char mode,
bool direction,
unsigned char speed,
int seq,
std::vector<RGBColor> colors
)
{
unsigned char color_data[9 * 3];
memset(color_data, 0, sizeof(color_data));
if(!colors.empty() && channel != NZXT_KRAKEN_CHANNEL_RING)
{
colors[0] = ToLogoColor(colors[0]);
}
SetColor(colors, color_data);
SendEffect(channel, mode, direction, color_data, speed, false, seq);
}
void NZXTKrakenController::SendEffect
(
unsigned char channel,
unsigned char mode,
bool direction,
unsigned char* color_data,
unsigned char speed /* = 0x02 */,
bool movement /* = false */,
int cis /* = 0 */,
int size /* = 0 */
)
{
int actual;
unsigned char usb_buf[65];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set effect mode |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x02;
usb_buf[0x01] = 0x4c;
/*-----------------------------------------------------*\
| Set effect channel, movement and direction |
\*-----------------------------------------------------*/
usb_buf[0x02] = channel;
usb_buf[0x02] |= movement ? ( 1 << 3 ) : 0;
usb_buf[0x02] |= direction ? ( 1 << 4 ) : 0;
/*-----------------------------------------------------*\
| Set mode |
\*-----------------------------------------------------*/
usb_buf[0x03] = mode;
/*-----------------------------------------------------*\
| Set effect speed, size and color in set |
\*-----------------------------------------------------*/
usb_buf[0x04] = speed;
usb_buf[0x04] |= size << 3;
usb_buf[0x04] |= cis << 5;
/*-----------------------------------------------------*\
| Copy color data bytes |
\*-----------------------------------------------------*/
if(color_data)
{
memcpy(usb_buf + 0x05, color_data, 9 * 3);
}
/*-----------------------------------------------------*\
| Send effect |
\*-----------------------------------------------------*/
libusb_interrupt_transfer
(
dev,
NZXT_KRAKEN_WRITE_ENDPOINT,
usb_buf,
sizeof(usb_buf),
&actual,
0
);
}
@@ -0,0 +1,86 @@
/*---------------------------------------------------------*\
| Definitions for NZXT Kraken |
| |
| Martin Hartl (inlart), 04/04/2020 |
\*---------------------------------------------------------*/
#pragma once
#include "RGBController.h"
#include <vector>
#include <string>
#include <libusb-1.0/libusb.h>
enum NZXTKrakenChannel_t
{
NZXT_KRAKEN_CHANNEL_SYNC = 0x00, /* Sync Channel */
NZXT_KRAKEN_CHANNEL_LOGO = 0x01, /* Logo Channel */
NZXT_KRAKEN_CHANNEL_RING = 0x02, /* Ring Channel */
};
enum
{
NZXT_KRAKEN_MODE_FIXED = 0x00, /* Fixed colors mode */
NZXT_KRAKEN_MODE_FADING = 0x01, /* Fading mode */
NZXT_KRAKEN_MODE_SPECTRUM = 0x02, /* Spectrum cycle mode */
NZXT_KRAKEN_MODE_MARQUEE = 0x03, /* Marquee mode */
NZXT_KRAKEN_MODE_COVER_MARQUEE = 0x04, /* Cover marquee mode */
NZXT_KRAKEN_MODE_ALTERNATING = 0x05, /* Alternating mode */
NZXT_KRAKEN_MODE_BREATHING = 0x06, /* Breathing mode */
NZXT_KRAKEN_MODE_PULSE = 0x07, /* Pulse mode */
NZXT_KRAKEN_MODE_TAI_CHI = 0x08, /* Tai Chi mode */
NZXT_KRAKEN_MODE_WATER_COOLER = 0x09, /* Water color mode */
NZXT_KRAKEN_MODE_LOADING = 0x0a, /* Loading mode */
NZXT_KRAKEN_MODE_WINGS = 0x0c, /* Wings mode */
};
enum
{
NZXT_KRAKEN_SPEED_SLOWEST = 0x00, /* Slowest speed */
NZXT_KRAKEN_SPEED_SLOW = 0x01, /* Slow speed */
NZXT_KRAKEN_SPEED_NORMAL = 0x02, /* Normal speed */
NZXT_KRAKEN_SPEED_FAST = 0x03, /* Fast speed */
NZXT_KRAKEN_SPEED_FASTEST = 0x04, /* Fastest speed */
};
class NZXTKrakenController
{
public:
NZXTKrakenController(libusb_device_handle* dev_handle);
~NZXTKrakenController();
std::string GetFirmwareVersion();
void UpdateEffect
(
NZXTKrakenChannel_t channel,
unsigned char mode,
bool direction,
unsigned char speed,
int seq,
std::vector<RGBColor> colors
);
private:
void UpdateStatus();
void SendEffect
(
unsigned char channel,
unsigned char mode,
bool direction,
unsigned char* color_data,
unsigned char speed = 0x02,
bool movement = false,
int cis = 0 ,
int size = 0
);
libusb_device_handle* dev;
// -- status
std::string firmware_version;
double liquid_temperature;
unsigned int fan_speed;
unsigned int pump_speed;
};
@@ -0,0 +1,37 @@
#include "NZXTKrakenController.h"
#include "RGBController.h"
#include "RGBController_NZXTKraken.h"
#include <vector>
#include <libusb-1.0/libusb.h>
#define NZXT_KRAKEN_VID 0x1E71
#define NZXT_KRAKEN_PID 0x170E
/******************************************************************************************\
* *
* DetectNZXTKrakenControllers *
* *
* Detect devices supported by the NZXTKraken driver *
* * *
\******************************************************************************************/
void DetectNZXTKrakenControllers(std::vector<RGBController*> &rgb_controllers)
{
libusb_context * ctx;
libusb_init(&ctx);
libusb_device_handle * dev = libusb_open_device_with_vid_pid(ctx, NZXT_KRAKEN_VID, NZXT_KRAKEN_PID);
if( dev )
{
libusb_detach_kernel_driver(dev, 0);
libusb_claim_interface(dev, 0);
NZXTKrakenController* controller = new NZXTKrakenController(dev);
RGBController_NZXTKraken* rgb_controller = new RGBController_NZXTKraken(controller);
rgb_controllers.push_back(rgb_controller);
}
}
@@ -85,7 +85,7 @@ void PatriotViperController::SetEffectColor(unsigned char red, unsigned char gre
ViperRegisterWrite(VIPER_REG_LED3_EFFECT_COLOR, red, blue, green);
ViperRegisterWrite(VIPER_REG_LED4_EFFECT_COLOR, red, blue, green);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, 0x0C);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, speed);
ViperRegisterWrite(VIPER_REG_MODE, 0xAA, 0x00, 0x00);
ViperRegisterWrite(VIPER_REG_MODE, 0xFA, 0x00, 0x00);
}
@@ -121,12 +121,12 @@ void PatriotViperController::SetLEDEffectColor(unsigned int led, unsigned char r
ViperRegisterWrite(VIPER_REG_LED0_EFFECT_COLOR + led, red, blue, green);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, 0x0C);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, speed);
ViperRegisterWrite(VIPER_REG_MODE, 0xAA, 0x00, 0x00);
ViperRegisterWrite(VIPER_REG_MODE, 0xFA, 0x00, 0x00);
}
void PatriotViperController::SetLEDColor(unsigned int slot, unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void PatriotViperController::SetLEDColor(unsigned int /*slot*/, unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
ViperRegisterWrite(VIPER_REG_START, 0xFF, 0xFF, 0xFF);
ViperRegisterWrite(VIPER_REG_STATIC, 0x04, 0x00, 0x00);
@@ -136,26 +136,27 @@ void PatriotViperController::SetLEDColor(unsigned int slot, unsigned int led, un
ViperRegisterWrite(VIPER_REG_APPLY, 0x01, 0x00, 0x00);
}
void PatriotViperController::SetLEDEffectColor(unsigned int slot, unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
void PatriotViperController::SetLEDEffectColor(unsigned int /*slot*/, unsigned int led, unsigned char red, unsigned char green, unsigned char blue)
{
ViperRegisterWrite(VIPER_REG_START, 0xFF, 0xFF, 0xFF);
ViperRegisterWrite(VIPER_REG_STATIC, 0x04, 0x00, 0x00);
ViperRegisterWrite(VIPER_REG_LED0_EFFECT_COLOR + led, red, blue, green);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, 0x0C);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, speed);
ViperRegisterWrite(VIPER_REG_MODE, 0xAA, 0x00, 0x00);
ViperRegisterWrite(VIPER_REG_MODE, 0xFA, 0x00, 0x00);
}
void PatriotViperController::SetMode(unsigned char new_mode)
void PatriotViperController::SetMode(unsigned char new_mode, unsigned char new_speed)
{
direct = false;
mode = new_mode;
mode = new_mode;
speed = new_speed;
ViperRegisterWrite(VIPER_REG_START, 0xFF, 0xFF, 0xFF);
ViperRegisterWrite(VIPER_REG_STATIC, 0x04, 0x00, 0x00);
ViperRegisterWrite(VIPER_REG_MODE, new_mode, 0x00, 0x0C);
ViperRegisterWrite(VIPER_REG_MODE, mode, 0x00, speed);
ViperRegisterWrite(VIPER_REG_MODE, 0xAA, 0x00, 0x00);
ViperRegisterWrite(VIPER_REG_MODE, 0xFA, 0x00, 0x00);
}
@@ -45,6 +45,16 @@ enum
VIPER_MODE_NEON = 0x08, /* Neon mode */
};
enum
{
VIPER_SPEED_MIN = 0xC8, /* Slowest speed for non-breathing mode */
VIPER_SPEED_DEFAULT = 0x64, /* Default speed for non-breathing mode */
VIPER_SPEED_MAX = 0x14, /* Fastest speed for non-breathing mode */
VIPER_SPEED_BREATHING_MIN = 0xFF, /* Slowest speed for breathing mode */
VIPER_SPEED_BREATHING_DEFAULT = 0x0C, /* Default speed for breathing mode */
VIPER_SPEED_BREATHING_MAX = 0x00, /* Fastest speed for breathing mode */
};
class PatriotViperController
{
public:
@@ -56,7 +66,7 @@ public:
unsigned int GetLEDCount();
unsigned int GetSlotCount();
unsigned int GetMode();
void SetMode(unsigned char new_mode);
void SetMode(unsigned char new_mode, unsigned char new_speed);
void SetDirect();
void SetAllColors(unsigned char red, unsigned char green, unsigned char blue);
@@ -75,5 +85,6 @@ private:
unsigned char slots_valid;
i2c_smbus_interface* bus;
viper_dev_id dev;
unsigned int mode;
unsigned char mode;
unsigned char speed;
};
@@ -15,31 +15,31 @@ PolychromeController::PolychromeController(i2c_smbus_interface* bus, polychrome_
this->bus = bus;
this->dev = dev;
switch (GetFirmwareVersion())
unsigned short fw_version = GetFirmwareVersion();
/*-----------------------------------------------------*\
| Determine whether the device uses ASR LED or |
| Polychrome protocol by checking firmware version. |
| Versions 1.xx and 2.xx use ASR LED, 3.xx uses |
| Polychrome |
\*-----------------------------------------------------*/
if(((fw_version >> 8) < 0x03) && ((fw_version >> 8) > 0x00))
{
case FIRMWARE_VER_1_PT_10:
led_count = 1;
asr_led = true;
strcpy(device_name, "ASRock ASR LED FW 1.10");
break;
case FIRMWARE_VER_2_PT_00:
led_count = 1;
asr_led = false;
strcpy(device_name, "ASRock Polychrome FW 2.00");
break;
case FIRMWARE_VER_3_PT_00:
led_count = 1;
asr_led = false;
strcpy(device_name, "ASRock Polychrome FW 3.00");
break;
default:
led_count = 0;
strcpy(device_name, "");
break;
snprintf(device_name, 32, "ASRock ASR LED FW %d.%02d", (fw_version >> 8), (fw_version & 0xFF));
led_count = 1;
asr_led = true;
}
else if(fw_version == 0x03)
{
snprintf(device_name, 32, "ASRock Polychrome FW %d.%02d", (fw_version >> 8), (fw_version & 0xFF));
led_count = 1;
asr_led = false;
}
else
{
led_count = 0;
}
}
PolychromeController::~PolychromeController()
@@ -76,45 +76,38 @@ unsigned int PolychromeController::GetLEDCount()
unsigned int PolychromeController::GetMode()
{
return(0);
return(active_mode);
}
void PolychromeController::SetAllColors(unsigned char red, unsigned char green, unsigned char blue)
bool PolychromeController::IsAsrLed()
{
return(asr_led);
}
void PolychromeController::SetColor(unsigned char red, unsigned char green, unsigned char blue)
{
unsigned char colors[3] = { red, green, blue };
if (asr_led)
{
bus->i2c_smbus_write_block_data(dev, active_mode, 3, colors);
}
else
{
unsigned char colors[3] = { red, green, blue };
bus->i2c_smbus_write_block_data(dev, POLYCHROME_REG_COLOR, 3, colors);
}
}
void PolychromeController::SetLEDColor(unsigned int /*led*/, unsigned char red, unsigned char green, unsigned char blue)
{
if (asr_led)
{
}
else
{
unsigned char colors[3] = { red, green, blue };
bus->i2c_smbus_write_block_data(dev, POLYCHROME_REG_COLOR, 3, colors);
}
}
void PolychromeController::SetMode(unsigned char mode)
{
active_mode = mode;
if (asr_led)
{
bus->i2c_smbus_write_block_data(dev, ASRLED_REG_MODE, 1, &active_mode);
}
else
{
bus->i2c_smbus_write_byte_data(dev, POLYCHROME_REG_MODE, mode);
bus->i2c_smbus_write_block_data(dev, POLYCHROME_REG_MODE, 1, &active_mode);
}
}
@@ -14,13 +14,6 @@
typedef unsigned char polychrome_dev_id;
enum
{
FIRMWARE_VER_1_PT_10 = 0x010A, /* Firmware nu51_1.10 */
FIRMWARE_VER_2_PT_00 = 0x0200, /* Firmware nu51_2.00 */
FIRMWARE_VER_3_PT_00 = 0x0300, /* Firmware nu51_3.00 */
};
enum
{
ASRLED_REG_FIRMWARE_VER = 0x00, /* Firmware version Major.Minor */
@@ -77,8 +70,8 @@ public:
char* GetDeviceName();
unsigned int GetLEDCount();
unsigned int GetMode();
void SetAllColors(unsigned char red, unsigned char green, unsigned char blue);
void SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue);
bool IsAsrLed();
void SetColor(unsigned char red, unsigned char green, unsigned char blue);
void SetMode(unsigned char mode);
unsigned short GetFirmwareVersion();
@@ -86,7 +79,8 @@ private:
bool asr_led;
char device_name[32];
unsigned int led_count;
unsigned char active_mode;
i2c_smbus_interface* bus;
polychrome_dev_id dev;
};
};
@@ -0,0 +1,241 @@
/*-----------------------------------------*\
| PoseidonZRGBController.cpp |
| |
| Driver for Thermaltake Poseidon Z RGB |
| Keyboard lighting controller |
| |
| Adam Honse (CalcProgrammer1) 12/25/2019 |
\*-----------------------------------------*/
#include "PoseidonZRGBController.h"
#include <cstring>
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
static unsigned int keys[] = {0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x15,
0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23,
0x24, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31,
0x32, 0x33, 0x34, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3E, 0x3F, 0x40,
0x41, 0x42, 0x43, 0x44, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4E, 0x4F,
0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C,
0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x66, 0x67, 0x68, 0x69, 0x6A,
0x6C, 0x6D, 0x6F, 0x70, 0x72, 0x73, 0x75, 0x76, 0x77, 0x78, 0x7C, 0x80, 0x81 };
PoseidonZRGBController::PoseidonZRGBController(hid_device* dev_handle)
{
dev = dev_handle;
}
PoseidonZRGBController::~PoseidonZRGBController()
{
}
void PoseidonZRGBController::SetMode(unsigned char mode, unsigned char direction, unsigned char speed)
{
active_mode = mode;
active_direction = direction;
active_speed = speed;
SendControl
(
POSEIDONZ_PROFILE_P1,
POSEIDONZ_PROFILE_P1,
active_direction,
active_mode,
POSEIDONZ_BRIGHTNESS_MAX,
active_speed
);
Sleep(200);
}
void PoseidonZRGBController::SetLEDsDirect(std::vector<RGBColor> colors)
{
unsigned char red_grn_buf[264];
unsigned char blu_buf[264];
/*-----------------------------------------------------*\
| Zero out buffers |
\*-----------------------------------------------------*/
memset(red_grn_buf, 0x00, sizeof(red_grn_buf));
memset(blu_buf, 0x00, sizeof(blu_buf));
/*-----------------------------------------------------*\
| Set up Direct packets |
\*-----------------------------------------------------*/
red_grn_buf[0] = 0x07;
red_grn_buf[1] = POSEIDONZ_PACKET_ID_SET_DIRECT;
red_grn_buf[2] = POSEIDONZ_PROFILE_P1;
red_grn_buf[3] = POSEIDONZ_DIRECT_RED_GREEN;
red_grn_buf[4] = 0x00;
red_grn_buf[5] = 0x00;
red_grn_buf[6] = 0x00;
red_grn_buf[7] = 0x00;
blu_buf[0] = 0x07;
blu_buf[1] = POSEIDONZ_PACKET_ID_SET_DIRECT;
blu_buf[2] = POSEIDONZ_PROFILE_P1;
blu_buf[3] = POSEIDONZ_DIRECT_BLUE;
blu_buf[4] = 0x00;
blu_buf[5] = 0x00;
blu_buf[6] = 0x00;
blu_buf[7] = 0x00;
/*-----------------------------------------------------*\
| Fill in color data |
\*-----------------------------------------------------*/
for(std::size_t i = 0; i < 104; i++)
{
red_grn_buf[keys[i] ] = RGBGetRValue(colors[i]);
red_grn_buf[keys[i] + 128] = RGBGetGValue(colors[i]);
blu_buf[ keys[i] ] = RGBGetBValue(colors[i]);
}
/*-----------------------------------------------------*\
| Send packets |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, red_grn_buf, 264);
Sleep(5);
hid_send_feature_report(dev, blu_buf, 264);
}
void PoseidonZRGBController::SetLEDs(std::vector<RGBColor> colors)
{
unsigned char red_color_data[104];
unsigned char grn_color_data[104];
unsigned char blu_color_data[104];
for(std::size_t i = 0; i < 104; i++)
{
red_color_data[i] = RGBGetRValue(colors[i]);
grn_color_data[i] = RGBGetGValue(colors[i]);
blu_color_data[i] = RGBGetBValue(colors[i]);
}
SendColor
(
POSEIDONZ_PROFILE_P1,
POSEIDONZ_COLOR_RED,
red_color_data
);
Sleep(10);
SendColor
(
POSEIDONZ_PROFILE_P1,
POSEIDONZ_COLOR_GREEN,
grn_color_data
);
Sleep(10);
SendColor
(
POSEIDONZ_PROFILE_P1,
POSEIDONZ_COLOR_BLUE,
blu_color_data
);
Sleep(10);
SendControl
(
POSEIDONZ_PROFILE_P1,
POSEIDONZ_PROFILE_P1,
active_direction,
active_mode,
POSEIDONZ_BRIGHTNESS_MAX,
active_speed
);
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void PoseidonZRGBController::SendColor
(
unsigned char profile_to_edit,
unsigned char color_channel,
unsigned char* color_data
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Color packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = POSEIDONZ_PACKET_ID_SET_COLOR;
buf[0x02] = profile_to_edit;
buf[0x03] = color_channel;
/*-----------------------------------------------------*\
| Fill in color data |
\*-----------------------------------------------------*/
for(int i = 0; i < 104; i++)
{
buf[keys[i]] = color_data[i];
}
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
void PoseidonZRGBController::SendControl
(
unsigned char profile_to_activate,
unsigned char profile_to_edit,
unsigned char direction,
unsigned char mode,
unsigned char brightness,
unsigned char speed
)
{
unsigned char buf[264];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(buf, 0x00, sizeof(buf));
/*-----------------------------------------------------*\
| Set up Effect packet |
\*-----------------------------------------------------*/
buf[0x00] = 0x07;
buf[0x01] = POSEIDONZ_PACKET_ID_SET_EFFECT;
buf[0x02] = profile_to_activate;
buf[0x08] = profile_to_edit;
buf[0x0A] = direction;
buf[0x0C] = mode;
buf[0x0D] = brightness;
buf[0x10] = 0x08;
buf[0x12] = speed;
buf[0x13] = 0x50;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_send_feature_report(dev, buf, 264);
}
@@ -0,0 +1,106 @@
/*-----------------------------------------*\
| PoseidonZRGBController.h |
| |
| Definitions and types for Thermaltake |
| Poseidon Z RGB Keyboard lighting |
| controller |
| |
| Adam Honse (CalcProgrammer1) 12/25/2019 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
#define POSEIDONZ_START 0x07
#define POSEIDONZ_PROFILE 0x01
#define POSEIDONZ_LED_CMD 0x0E
#define POSEIDONZ_RED_GRN_CH 0x01
#define POSEIDONZ_BLU_CH 0x02
enum
{
POSEIDONZ_PACKET_ID_SET_EFFECT = 0x02, /* Set profile effect packet */
POSEIDONZ_PACKET_ID_SET_COLOR = 0x09, /* Set profile color packet */
POSEIDONZ_PACKET_ID_SET_DIRECT = 0x0E, /* Set direct color packet */
};
enum
{
POSEIDONZ_MODE_STATIC = 0x00,
POSEIDONZ_MODE_REACTIVE = 0x01,
POSEIDONZ_MODE_ARROW_FLOW = 0x02,
POSEIDONZ_MODE_WAVE = 0x03,
POSEIDONZ_MODE_RIPPLE = 0x04
};
enum
{
POSEIDONZ_PROFILE_P1 = 0x01,
POSEIDONZ_PROFILE_P2 = 0x02,
POSEIDONZ_PROFILE_P3 = 0x03,
POSEIDONZ_PROFILE_P4 = 0x04,
POSEIDONZ_PROFILE_P5 = 0x05
};
enum
{
POSEIDONZ_BRIGHTNESS_MIN = 0x00,
POSEIDONZ_BRIGHTNESS_MAX = 0x04
};
enum
{
POSEIDONZ_COLOR_RED = 0x01,
POSEIDONZ_COLOR_GREEN = 0x02,
POSEIDONZ_COLOR_BLUE = 0x03
};
enum
{
POSEIDONZ_DIRECT_RED_GREEN = 0x01,
POSEIDONZ_DIRECT_BLUE = 0x02
};
enum
{
POSEIDONZ_SPEED_SLOW = 0x10,
POSEIDONZ_SPEED_FAST = 0x05
};
class PoseidonZRGBController
{
public:
PoseidonZRGBController(hid_device* dev_handle);
~PoseidonZRGBController();
void SetMode(unsigned char mode, unsigned char direction, unsigned char speed);
void SetLEDsDirect(std::vector<RGBColor> colors);
void SetLEDs(std::vector<RGBColor> colors);
private:
hid_device* dev;
unsigned char active_mode;
unsigned char active_direction;
unsigned char active_speed;
void SendControl
(
unsigned char profile_to_activate,
unsigned char profile_to_edit,
unsigned char direction,
unsigned char mode,
unsigned char brightness,
unsigned char speed
);
void SendColor
(
unsigned char profile_to_edit,
unsigned char color_channel,
unsigned char* color_data
);
};
@@ -0,0 +1,52 @@
#include "PoseidonZRGBController.h"
#include "RGBController.h"
#include "RGBController_PoseidonZRGB.h"
#include <vector>
#include <hidapi/hidapi.h>
#define TT_POSEIDON_Z_RGB_VID 0x264A
#define TT_POSEIDON_Z_RGB_PID 0x3006
/******************************************************************************************\
* *
* DetectPoseidonZRGBControllers *
* *
* Tests the USB address to see if a Thermaltake Poseidon Z RGB Keyboard controller *
* exists there. *
* *
\******************************************************************************************/
void DetectPoseidonZRGBControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device_info* info;
hid_device* dev = NULL;
hid_init();
info = hid_enumerate(TT_POSEIDON_Z_RGB_VID, TT_POSEIDON_Z_RGB_PID);
//Look for Thermaltake Poseidon Z RGB, Interface 2
while(info)
{
if((info->vendor_id == TT_POSEIDON_Z_RGB_VID)
&&(info->product_id == TT_POSEIDON_Z_RGB_PID)
&&(info->interface_number == 2))
{
dev = hid_open_path(info->path);
break;
}
else
{
info = info->next;
}
}
if( dev )
{
PoseidonZRGBController* controller = new PoseidonZRGBController(dev);
RGBController_PoseidonZRGB* rgb_controller = new RGBController_PoseidonZRGB(controller);
rgb_controllers.push_back(rgb_controller);
}
}
@@ -0,0 +1,139 @@
/*-----------------------------------------*\
| RGBFusion2SMBusController.cpp |
| |
| Driver for Gigabyte Aorus RGB Fusion 2 |
| SMBus lighting controller |
| |
| Adam Honse (CalcProgrammer1) 3/12/2020 |
| Matt Harper 5/5/2020 |
\*-----------------------------------------*/
#include "RGBFusion2SMBusController.h"
#include <cstring>
#include <stdio.h>
#include <stdlib.h>
#ifdef DEBUG
#include <iostream>
#include <iomanip>
#endif
RGBFusion2SMBusController::RGBFusion2SMBusController(i2c_smbus_interface* bus, rgb_fusion_dev_id dev)
{
this->bus = bus;
this->dev = dev;
memset(led_data, 0, 10*16);
led_count = 10; // Protocol supports 10 'slots'
}
unsigned int RGBFusion2SMBusController::GetLEDCount()
{
return(led_count);
}
std::string RGBFusion2SMBusController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
snprintf(addr, 5, "0x%02X", dev);
return_string.append(", address ");
return_string.append(addr);
return(return_string);
}
/* Writes are performed in 32 byte chunks. If we need to write the second 16 bytes,
* we must necessarily write the first 16 as well. Given that reading the existing state
* from the device is not yet possible, unfortunately we may overwrite existing device
* states if the state transition did not occur within in the same OpenRGB instance.
* That is to say, the current behavior is non-deal but the best we have
*/
void RGBFusion2SMBusController::WriteLED(int led)
{
unsigned short register_offset = led / 2; // Relying on integer division to truncate
unsigned short write_register = RGB_FUSION_2_LED_START_ADDR + 2*register_offset;
// Adjust if we are writing the second 16 bytes
if(led % 2)
{
led -= 1;
}
#ifdef DEBUG
std::cout << std::hex << write_register << "\t";
for(int i = 0; i < 2; i++)
{
for(int j = 0; j < 16; j++)
{
std::cout << std::setw(2) << std::setfill('0') << std::hex << (int)led_data[led+i][j] << " ";
}
std::cout << " ";
}
std::cout << std::endl;
#endif
bus->i2c_smbus_write_block_data(RGB_FUSION_2_SMBUS_ADDR, write_register, 32, led_data[led]);
}
void RGBFusion2SMBusController::Apply()
{
// Protocol expects terminating sequence 0x01ff written to register 0x17
bus->i2c_smbus_write_word_data(RGB_FUSION_2_SMBUS_ADDR,
RGB_FUSION_2_APPLY_ADDR,
RGB_FUSION_2_ACTION_APPLY);
}
void RGBFusion2SMBusController::SetLEDEffect
(
unsigned int led,
int mode,
unsigned int speed,
unsigned char red,
unsigned char green,
unsigned char blue
)
{
led_data[led][RGB_FUSION_2_IDX_MODE] = mode;
led_data[led][RGB_FUSION_2_IDX_RED] = red;
led_data[led][RGB_FUSION_2_IDX_GREEN] = green;
led_data[led][RGB_FUSION_2_IDX_BLUE] = blue;
led_data[led][RGB_FUSION_2_IDX_BRIGHTNESS] = 0x64;
switch (mode)
{
case RGB_FUSION_2_MODE_PULSE:
// Timer 1: On time
// Timer 2: Off time
led_data[led][RGB_FUSION_2_TIMER_1_LSB] = 0x20 * speed;
led_data[led][RGB_FUSION_2_TIMER_1_MSB] = 0x03 * speed;
led_data[led][RGB_FUSION_2_TIMER_2_LSB] = 0x20 * speed;
led_data[led][RGB_FUSION_2_TIMER_2_MSB] = 0x03 * speed;
break;
case RGB_FUSION_2_MODE_COLOR_CYCLE:
// Timer 1: Cycle time
led_data[led][RGB_FUSION_2_TIMER_1_LSB] = 0x00;
led_data[led][RGB_FUSION_2_TIMER_1_MSB] = 0x03 * speed;
led_data[led][RGB_FUSION_2_IDX_OPT_1] = 0x07; // Number of colors to cycle through. Valid range [1-7]
led_data[led][RGB_FUSION_2_IDX_OPT_2] = 0x00; // Color cycle, or color cycle and pulse. [0,1]
break;
case RGB_FUSION_2_MODE_FLASHING:
/* Timer 1: On time
* Timer 2: Interval
* Timer 3: Cycle time */
led_data[led][RGB_FUSION_2_TIMER_1_LSB] = 0x64;
led_data[led][RGB_FUSION_2_TIMER_1_MSB] = 0;
led_data[led][RGB_FUSION_2_TIMER_2_LSB] = 0xc8;
led_data[led][RGB_FUSION_2_TIMER_2_MSB] = 0;
led_data[led][RGB_FUSION_2_TIMER_3_LSB] = 0xd0;
led_data[led][RGB_FUSION_2_TIMER_3_MSB] = 0x07;
led_data[led][RGB_FUSION_2_IDX_OPT_1] = speed; // Controls number of flashes
break;
}
WriteLED(led);
}
@@ -0,0 +1,103 @@
/*-----------------------------------------*\
| RGBFusion2SMBusController.h |
| |
| Definitions and types for Gigabyte Aorus |
| RGB Fusion 2 SMBus lighting controller |
| |
| Adam Honse (CalcProgrammer1) 3/12/2020 |
\*-----------------------------------------*/
#include <string>
#include "i2c_smbus.h"
#pragma once
typedef unsigned char rgb_fusion_dev_id;
enum
{
RGB_FUSION_2_IDX_MODE = 0x01, /* Mode index */
RGB_FUSION_2_IDX_BRIGHTNESS = 0x02, /* Brightness index */
RGB_FUSION_2_IDX_MAX_BRIGHTNESS = 0x02, /* Max brightness index */
RGB_FUSION_2_IDX_MIN_BRIGHTNESS = 0x03, /* Minimum brightness index */
RGB_FUSION_2_IDX_BLUE = 0x04, /* Blue index */
RGB_FUSION_2_IDX_GREEN = 0x05, /* Green index */
RGB_FUSION_2_IDX_RED = 0x06, /* Red index */
RGB_FUSION_2_IDX_WHITE = 0x07, /* White index */
RGB_FUSION_2_TIMER_1_LSB = 0x08, /* Timer 1 LSB. Valid timer values [0-65535] */
RGB_FUSION_2_TIMER_1_MSB = 0x09, /* Timer 1 MSB. Timer unis are milliseconds */
RGB_FUSION_2_TIMER_2_LSB = 0x0A, /* Timer 2 LSB */
RGB_FUSION_2_TIMER_2_MSB = 0x0B, /* Timer 2 MSB */
RGB_FUSION_2_TIMER_3_LSB = 0x0C, /* Timer 3 LSB */
RGB_FUSION_2_TIMER_3_MSB = 0x0D, /* Timer 3 MSB */
RGB_FUSION_2_IDX_OPT_1 = 0x0E, /* Option 1. Use case varies by mode */
RGB_FUSION_2_IDX_OPT_2 = 0x0F, /* Option 2. Use case varies by mode */
};
enum
{
RGB_FUSION_2_APPLY_ADDR = 0x17,
RGB_FUSION_2_LED_START_ADDR = 0x20,
RGB_FUSION_2_SMBUS_ADDR = 0x68,
};
enum
{
RGB_FUSION_2_ACTION_APPLY = 0x01ff,
};
enum
{
RGB_FUSION_2_MODE_PULSE = 0x01, /* Pulse mode */
RGB_FUSION_2_MODE_MUSIC = 0x02, /* Music mode */
RGB_FUSION_2_MODE_COLOR_CYCLE = 0x03, /* Color cycle mode */
RGB_FUSION_2_MODE_STATIC = 0x04, /* Static color mode */
RGB_FUSION_2_MODE_FLASHING = 0x05, /* Flashing / Double Flashing mode */
RGB_FUSION_2_MODE_TRANSITION = 0x09, /* Gradual transition from current */
RGB_FUSION_2_MODE_DIGITAL_A = 0x0A, /* Wave mode */
RGB_FUSION_2_MODE_DIGITAL_B = 0x0B, /* */
RGB_FUSION_2_MODE_DIGITAL_C = 0x0C, /* */
RGB_FUSION_2_MODE_DIGITAL_D = 0x0D, /* */
RGB_FUSION_2_MODE_DIGITAL_E = 0x0E, /* */
RGB_FUSION_2_MODE_DIGITAL_F = 0x0F, /* */
RGB_FUSION_2_MODE_DIGITAL_G = 0x10, /* */
RGB_FUSION_2_MODE_DIGITAL_H = 0x11, /* */
RGB_FUSION_2_MODE_DIGITAL_I = 0x12, /* */
};
enum
{
RGB_FUSION_2_SPEED_FAST = 0x01,
RGB_FUSION_2_SPEED_NORMAL = 0x02,
RGB_FUSION_2_SPEED_SLOW = 0x04,
};
class RGBFusion2SMBusController
{
public:
RGBFusion2SMBusController(i2c_smbus_interface* bus, rgb_fusion_dev_id dev);
~RGBFusion2SMBusController();
std::string GetDeviceLocation();
unsigned int GetLEDCount();
void Apply();
void SetLEDEffect
(
unsigned int led,
int mode,
unsigned int speed,
unsigned char red,
unsigned char green,
unsigned char blue
);
private:
unsigned int led_count;
i2c_smbus_interface* bus;
rgb_fusion_dev_id dev;
unsigned char led_data[10][16];
void WriteLED(int);
};
@@ -0,0 +1,73 @@
#include "RGBFusion2SMBusController.h"
#include "RGBController.h"
#include "RGBController_RGBFusion2SMBus.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
#include <string>
/******************************************************************************************\
* *
* TestForRGBFusion2SMBusController *
* *
* Tests the given address to see if an RGB 2 Fusion controller exists there. First *
* does a quick write to test for a response *
* *
\******************************************************************************************/
bool TestForRGBFusion2SMBusController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
int res = bus->i2c_smbus_write_quick(address, I2C_SMBUS_WRITE);
if (res >= 0)
{
pass = true;
// res = bus->i2c_smbus_read_byte_data(address, 0xF2);
// if (res != 0xC4)
// {
// pass = false;
// }
}
return(pass);
} /* TestForRGBFusion2SMBusController() */
/******************************************************************************************\
* *
* DetectRGBFusion2SMBusControllers *
* *
* Detect RGB Fusion 2 controllers on the enumerated I2C busses at address 0x68. *
* *
* bus - pointer to i2c_smbus_interface where RGB Fusion device is connected *
* dev - I2C address of RGB Fusion device *
* *
\******************************************************************************************/
void DetectRGBFusion2SMBusControllers(std::vector<i2c_smbus_interface*>& busses, std::vector<RGBController*>& rgb_controllers)
{
RGBFusion2SMBusController* new_rgb_fusion;
RGBController_RGBFusion2SMBus* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// TODO - Is this necessary? Or an artifact of my own system?
// Skip dmcd devices
std::string device_name = std::string(busses[bus]->device_name);
if (device_name.find("dmdc") == std::string::npos)
{
// Check for RGB Fusion 2 controller at 0x68
if (TestForRGBFusion2SMBusController(busses[bus], 0x68))
{
new_rgb_fusion = new RGBFusion2SMBusController(busses[bus], 0x68);
new_controller = new RGBController_RGBFusion2SMBus(new_rgb_fusion);
rgb_controllers.push_back(new_controller);
}
}
}
} /* DetectRGBFusion2SMBusControllers() */
@@ -0,0 +1,290 @@
/*-----------------------------------------*\
| RGBFusion2USBController.cpp |
| |
| Driver for Gigabyte Aorus RGB Fusion 2.0 |
| USB lighting controller |
| |
| jackun 1/8/2020 |
\*-----------------------------------------*/
#include "RGBFusion2USBController.h"
#include <algorithm>
#include <array>
#include <thread>
#include <chrono>
static LEDCount LedCountToEnum(unsigned int c)
{
if (c <= 32)
return(LEDS_32);
if (c <= 64)
return(LEDS_64);
if (c <= 256)
return(LEDS_256);
if (c <= 512)
return(LEDS_512);
return(LEDS_1024);
}
RGBFusion2USBController::RGBFusion2USBController(hid_device* handle, const char *path) : dev(handle)
{
int res = 0;
char text[64] {};
unsigned char buffer[64] {};
if( dev ) {
SetCalibration();
// hid report read needs 0x60 packet or it gives IO error
SendPacket(0x60, 0x00);
buffer[0] = report_id;
res = hid_get_feature_report(dev, buffer, 64);
if( res > 0 )
{
report = *reinterpret_cast<IT8297Report*>(buffer);
name = std::string(report.str_product, 32);
name.erase(std::find(name.begin(), name.end(), '\0'), name.end());
snprintf(text, 11, "0x%08X", report.fw_ver);
version = text;
snprintf(text, 11, "0x%08X", report.chip_id);
chip_id = text;
}
loc = path;
EnableBeat(false);
}
}
RGBFusion2USBController::~RGBFusion2USBController()
{
if( dev ) {
hid_close(dev);
}
}
void RGBFusion2USBController::SetMode(int m)
{
mode = m;
}
// Sets RGB color mapping to LED pins.
// "Custom" RGB packets don't seem to get remapped so use report.byteorderN and do it manually.
// Of course it all depends how we send data to the controller, but bios/rgb fusion 2 itself
// set it up like this.
void RGBFusion2USBController::SetCalibration()
{
uint8_t buffer[64] {};
buffer[0] = report_id;
buffer[1] = 0x33;
// D_LED1 WS2812 GRB, 0x00RRGGBB to 0x00GGRRBB
buffer[2] = 0x02; // B
buffer[3] = 0x00; // G
buffer[4] = 0x01; // R
buffer[5] = 0x00;
// D_LED2 WS2812 GRB
buffer[6] = 0x02;
buffer[7] = 0x00;
buffer[8] = 0x01;
buffer[9] = 0x00;
// LED C1/C2 12vGRB, seems pins already connect to LEDs correctly
buffer[10] = 0x00;
buffer[11] = 0x01;
buffer[12] = 0x02;
buffer[13] = 0x00;
SendPacket(buffer);
}
void RGBFusion2USBController::SetLedCount(unsigned int count)
{
LEDCount s0 = LedCountToEnum(count);
SendPacket(0x34, s0 | (s0 << 4)); // D_LED1 | D_LED2
}
bool RGBFusion2USBController::DisableBuiltinEffect(int enable_bit, int mask)
{
if(effect_disabled & enable_bit)
return(true);
effect_disabled &= ~mask;
effect_disabled |= enable_bit;
int res = SendPacket(0x32, effect_disabled);
// Sometimes effect doesn't apply at first, delay a little and let MCU to react, if this packet is the cause
std::this_thread::sleep_for(std::chrono::milliseconds(50));
return res;
}
bool RGBFusion2USBController::EnableBeat(bool e)
{
return SendPacket(0x31, e ? 1 : 0);
}
std::string RGBFusion2USBController::GetDeviceName()
{
return(name);
}
std::string RGBFusion2USBController::GetFWVersion()
{
return(version);
}
std::string RGBFusion2USBController::GetDeviceLocation()
{
return(loc);
}
std::string RGBFusion2USBController::GetSerial()
{
return(chip_id);
}
void RGBFusion2USBController::SetStripColors
(
unsigned int hdr,
RGBColor * colors,
unsigned int num_colors,
int single_led
)
{
PktRGB pkt;
pkt.Init(hdr, report_id);
// FIXME assuming that LED strips ports are 0x58/0x59 for all boards
uint32_t byteorder = hdr == HDR_D_LED1_RGB ? report.byteorder0 : report.byteorder1;
unsigned char bo_r = byteorder >> 16;
unsigned char bo_g = byteorder >> 8;
unsigned char bo_b = byteorder & 0xFF;
int res;
int leds_left = num_colors;
int sent_data = 0;
int k = 0;
int leds_in_pkt = sizeof(pkt.s.leds) / sizeof(*pkt.s.leds); /* 19 */
// other leds stay at whatever the builtin effect was doing at that moment
// if breathing/pulse effect faded out then they stay dark
if(single_led > -1)
{
leds_left = 1;
k = single_led;
sent_data = k * 3;
leds_in_pkt = 1;
}
while(leds_left > 0)
{
leds_in_pkt = (std::min)(leds_in_pkt, leds_left);
leds_left -= leds_in_pkt;
pkt.s.bcount = leds_in_pkt * 3;
pkt.s.boffset = sent_data;
sent_data += pkt.s.bcount;
for(int i = 0; i < leds_in_pkt; i++)
{
RGBColor color = colors[k];
unsigned char red = RGBGetRValue(color);
unsigned char grn = RGBGetGValue(color);
unsigned char blu = RGBGetBValue(color);
pkt.buffer[5 + i * 3 + bo_r] = red;
pkt.buffer[5 + i * 3 + bo_g] = grn;
pkt.buffer[5 + i * 3 + bo_b] = blu;
k++;
}
res = SendPacket(pkt.buffer);
if(res < 0)
return;
}
if (hdr == HDR_D_LED1_RGB)
DisableBuiltinEffect(0x01, 0x01);
else
DisableBuiltinEffect(0x02, 0x02);
}
static const std::array< std::array<int, 3>, 5> speeds = {
{
{1600, 1600, 200},
{1200, 1200, 200},
{800, 800, 200},
{400, 400, 200},
{200, 200, 200},
},
};
void RGBFusion2USBController::SetLEDEffect(unsigned int led, int mode, unsigned int speed, bool random, unsigned char r, unsigned char g, unsigned char b)
{
PktEffect pkt;
pkt.Init(led, report_id);
pkt.e.effect_type = mode;
pkt.e.color0 = r << 16 | g << 8 | b;
if (speed < speeds.size()) {
const auto& s = speeds[speed];
pkt.e.period0 = s[0];
pkt.e.period1 = s[1];
pkt.e.period2 = s[2];
}
switch(mode)
{
case 0: break;
case 1: break; // static
case 2: // breathing
case 3: // blink
if (random)
pkt.e.effect_param0 = 7; // cycle through up to 7 (max?) colors
break;
case 4: // color cycle
pkt.e.effect_param0 = 7; // cycle through up to 7 (max?) colors
break;
// "fake" effects
case 10: // flashing, flashing color cycle
pkt.e.period0 = 200;
pkt.e.period1 = 200;
pkt.e.period2 = 5000 - 1000 * speed; // time between flashing, doesn't seem to be affected by period0/period1
pkt.e.effect_type = 3;
pkt.e.effect_param2 = 2; // flash twice
if (random)
pkt.e.effect_param0 = 7;
break;
}
SendPacket(pkt.buffer);
}
bool RGBFusion2USBController::ApplyEffect()
{
return SendPacket(0x28, 0xFF);
}
bool RGBFusion2USBController::SendPacket(uint8_t a, uint8_t b, uint8_t c)
{
unsigned char buffer[64] {};
buffer[0] = report_id;
buffer[1] = a;
buffer[2] = b;
buffer[3] = c;
return (SendPacket(buffer) == 64);
}
int RGBFusion2USBController::SendPacket(unsigned char* packet)
{
return hid_send_feature_report(dev, packet, 64);
}
@@ -0,0 +1,196 @@
/*-----------------------------------------*\
| RGBFusion2USBController.h |
| |
| Definitions and types for Gigabyte Aorus |
| RGB Fusion 2.0 USB lighting controller |
| |
| jackun 1/8/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <cstring>
#include <hidapi/hidapi.h>
#pragma once
// LED "headers" 0x20..0x27, As seen on Gigabyte X570 Elite board
const uint8_t HDR_BACK_IO = 0x20;
const uint8_t HDR_CPU = 0x21;
const uint8_t HDR_LED_2 = 0x22;
const uint8_t HDR_PCIE = 0x23;
const uint8_t HDR_LED_C1C2 = 0x24;
const uint8_t HDR_D_LED1 = 0x25;
const uint8_t HDR_D_LED2 = 0x26;
const uint8_t HDR_LED_7 = 0x27;
const uint8_t HDR_D_LED1_RGB = 0x58; // FIXME assuming that it is 0x58 for all boards
const uint8_t HDR_D_LED2_RGB = 0x59;
enum EffectType
{
EFFECT_NONE = 0,
EFFECT_STATIC = 1,
EFFECT_PULSE = 2,
EFFECT_BLINKING = 3,
EFFECT_COLORCYCLE = 4,
// to be continued...
};
enum LEDCount
{
LEDS_32 = 0,
LEDS_64,
LEDS_256,
LEDS_512,
LEDS_1024,
};
struct LEDs
{
uint8_t r;
uint8_t g;
uint8_t b;
};
#pragma pack(push, 1)
union PktRGB
{
unsigned char buffer[64];
struct RGBData
{
uint8_t report_id;
uint8_t header;
uint16_t boffset; // in bytes, absolute
uint8_t bcount;
LEDs leds[19];
uint16_t padding0;
} s;
PktRGB() : s {}
{
}
void Init(uint8_t header, uint8_t report_id)
{
s.report_id = report_id;
s.header = header;
s.boffset = 0;
s.bcount = 0;
memset(s.leds, 0, sizeof(s.leds));
}
};
union PktEffect
{
unsigned char buffer[64];
struct Effect
{
uint8_t report_id;
uint8_t header;
uint32_t zone0; // rgb fusion seems to set it to pow(2, header - 0x20)
uint32_t zone1;
uint8_t reserved0;
uint8_t effect_type;
uint8_t max_brightness;
uint8_t min_brightness;
uint32_t color0;
uint32_t color1;
uint16_t period0; // fade in
uint16_t period1; // fade out
uint16_t period2; // hold
uint16_t period3;
uint8_t effect_param0;
uint8_t effect_param1;
uint8_t effect_param2;
uint8_t effect_param3;
uint8_t padding0[30];
} e;
PktEffect() : e {}
{
}
void Init(int header, uint8_t report_id)
{
memset(buffer, 0, sizeof(buffer));
e.report_id = report_id;
if (header < 8)
e.header = 32 + header; // set as default
else
e.header = header;
e.zone0 = (uint32_t)(1 << (e.header - 32));
e.effect_type = EFFECT_STATIC;
e.max_brightness = 100;
e.min_brightness = 0;
e.color0 = 0x00FF2100; //orange
e.period0 = 1200;
e.period1 = 1200;
e.period2 = 200;
e.period3 = 200;
e.effect_param0 = 0; // ex color count to cycle through (max seems to be 7)
e.effect_param1 = 0;
e.effect_param2 = 1; // ex flash repeat count
e.effect_param3 = 0;
}
};
struct IT8297Report
{
uint8_t report_id;
uint8_t product;
uint8_t device_num;
uint8_t total_leds;
uint32_t fw_ver;
uint16_t curr_led_count;
uint16_t reserved0;
char str_product[32]; // might be 28 and an extra byteorder3
uint32_t byteorder0; // is little-endian 0x00RRGGBB ?
uint32_t byteorder1;
uint32_t byteorder2;
uint32_t chip_id;
uint32_t reserved1;
};
#pragma pack(pop)
class RGBFusion2USBController
{
public:
RGBFusion2USBController(hid_device* handle, const char *path);
~RGBFusion2USBController();
void SetStripColors
(
unsigned int hdr,
RGBColor * colors,
unsigned int num_colors,
int single_led = -1
);
void SetLEDEffect(unsigned int led, int mode, unsigned int speed, bool random, unsigned char red, unsigned char green, unsigned char blue);
void SetLedCount(unsigned int count);
void SetMode(int mode);
bool ApplyEffect();
bool DisableBuiltinEffect(int enable_bit, int mask);
void SetCalibration();
std::string GetDeviceName();
std::string GetDeviceLocation();
std::string GetFWVersion();
std::string GetSerial();
private:
bool EnableBeat(bool enable);
bool SendPacket(uint8_t a, uint8_t b, uint8_t c = 0);
int SendPacket(unsigned char* packet);
hid_device* dev;
int mode;
IT8297Report report;
std::string name;
std::string loc;
std::string version;
std::string chip_id;
int effect_disabled = 0;
int report_id = 0xCC;
};
@@ -0,0 +1,37 @@
#include "RGBFusion2USBController.h"
#include "RGBController_RGBFusion2USB.h"
#define IT8297_VID 0x048D
#define IT8297_PID 0x8297
/******************************************************************************************\
* *
* DetectRGBFusion2USBControllers *
* *
* Detect RGB Fusion 2 devices that use IT8297 RGB controller *
* *
\******************************************************************************************/
void DetectRGBFusion2USBControllers(std::vector<RGBController*> &rgb_controllers)
{
if (hid_init() < 0)
return;
hid_device_info * device_list = hid_enumerate(IT8297_VID, IT8297_PID);
if (!device_list)
return;
hid_device_info * device = device_list;
while (device)
{
hid_device * dev = hid_open_path(device->path);
if (dev) {
RGBFusion2USBController * controller = new RGBFusion2USBController(dev, device_list->path);
RGBController_RGBFusion2USB * rgb_controller = new RGBController_RGBFusion2USB(controller);
rgb_controllers.push_back(rgb_controller);
}
device = device->next;
}
hid_free_enumeration(device_list);
}
@@ -102,11 +102,13 @@ void RGBFusionController::SetLEDColor(unsigned int led, unsigned char red, unsig
}
}
void RGBFusionController::SetMode(unsigned char mode)
void RGBFusionController::SetMode(unsigned char mode, unsigned char speed)
{
switch_bank(0);
set_mode_ch_0(mode);
set_timers_ch_0(speed_table[0][speed], speed_table[1][speed]);
set_mode_ch_1(mode);
set_timers_ch_1(speed_table[0][speed], speed_table[1][speed]);
}
void RGBFusionController::dump()
@@ -170,6 +172,22 @@ void RGBFusionController::set_mode_ch_1(unsigned char mode)
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_1_MODE, mode + RGB_FUSION_WRITE_MODE_OFST);
}
void RGBFusionController::set_timers_ch_0(unsigned short timer0, unsigned short timer1)
{
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_0_TIMER_0_MSB, timer0 >> 8);
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_0_TIMER_0_LSB, timer0 & 0xFF);
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_0_TIMER_1_MSB, timer1 >> 8);
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_0_TIMER_1_LSB, timer1 & 0xFF);
}
void RGBFusionController::set_timers_ch_1(unsigned short timer0, unsigned short timer1)
{
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_1_TIMER_0_MSB, timer0 >> 8);
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_1_TIMER_0_LSB, timer0 & 0xFF);
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_1_TIMER_1_MSB, timer1 >> 8);
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_0_REG_CH_1_TIMER_1_LSB, timer1 & 0xFF);
}
void RGBFusionController::switch_bank(unsigned char bank)
{
bus->i2c_smbus_write_byte_data(dev, RGB_FUSION_BANK_SWITCH_REG, bank);
@@ -17,7 +17,23 @@ typedef unsigned char rgb_fusion_dev_id;
enum
{
RGB_FUSION_BANK_0_REG_CH_0_MODE = 0x03, /* Channel 0 Mode Selection */
RGB_FUSION_BANK_0_REG_CH_0_TIMER_0_MSB
= 0x06, /* Channel 0 Timer 0 MSB */
RGB_FUSION_BANK_0_REG_CH_0_TIMER_0_LSB
= 0x07, /* Channel 0 Timer 0 LSB */
RGB_FUSION_BANK_0_REG_CH_0_TIMER_1_MSB
= 0x08, /* Channel 0 Timer 1 MSB */
RGB_FUSION_BANK_0_REG_CH_0_TIMER_1_LSB
= 0x09, /* Channel 0 Timer 1 LSB */
RGB_FUSION_BANK_0_REG_CH_1_MODE = 0x13, /* Channel 1 Mode Selection */
RGB_FUSION_BANK_0_REG_CH_1_TIMER_0_MSB
= 0x16, /* Channel 1 Timer 0 MSB */
RGB_FUSION_BANK_0_REG_CH_1_TIMER_0_LSB
= 0x17, /* Channel 1 Timer 0 LSB */
RGB_FUSION_BANK_0_REG_CH_1_TIMER_1_MSB
= 0x18, /* Channel 1 Timer 1 MSB */
RGB_FUSION_BANK_0_REG_CH_1_TIMER_1_LSB
= 0x19, /* Channel 1 Timer 1 LSB */
RGB_FUSION_BANK_1_REG_CH_0_R = 0x00, /* Channel 0 Red Value */
RGB_FUSION_BANK_1_REG_CH_0_G = 0x01, /* Channel 0 Green Value */
RGB_FUSION_BANK_1_REG_CH_0_B = 0x02, /* Channel 0 Blue Value */
@@ -27,6 +43,19 @@ enum
RGB_FUSION_BANK_SWITCH_REG = 0xF0, /* Bank Switch Register */
};
enum
{
RGB_FUSION_SPEED_SLOW = 0x00, /* Slowest speed */
RGB_FUSION_SPEED_NORMAL = 0x01, /* Normal speed */
RGB_FUSION_SPEED_FAST = 0x02, /* Fastest speed */
};
static const short speed_table[2][3] =
{
{ 0x01E0, 0x00F0, 0x0078 },
{ 0x4000, 0x2000, 0x1000 }
};
#define RGB_FUSION_NUMBER_MODES 3 /* Number of RGB Fusion modes */
#define RGB_FUSION_WRITE_MODE_OFST 0x10 /* offset to add when writing mode */
@@ -49,7 +78,7 @@ public:
unsigned char GetMode();
void SetAllColors(unsigned char red, unsigned char green, unsigned char blue);
void SetLEDColor(unsigned int led, unsigned char red, unsigned char green, unsigned char blue);
void SetMode(unsigned char mode);
void SetMode(unsigned char mode, unsigned char speed);
private:
void dump();
@@ -61,6 +90,8 @@ private:
void set_color_ch_1(unsigned char red, unsigned char green, unsigned char blue);
void set_mode_ch_0(unsigned char mode);
void set_mode_ch_1(unsigned char mode);
void set_timers_ch_0(unsigned short timer0, unsigned short timer1);
void set_timers_ch_1(unsigned short timer0, unsigned short timer1);
void switch_bank(unsigned char bank);
char device_name[32];
@@ -24,6 +24,13 @@ bool TestForRGBFusionController(i2c_smbus_interface* bus, unsigned char address)
if (res >= 0)
{
pass = true;
res = bus->i2c_smbus_read_byte_data(address, 0xF2);
if (res != 0xC4)
{
pass = false;
}
}
return(pass);
@@ -0,0 +1,47 @@
/*-----------------------------------------*\
| RGBFusionGPUController.cpp |
| |
| Driver for Gigabyte Aorus RGB Fusion GPU |
| lighting controller |
| |
| Adam Honse (CalcProgrammer1) 2/20/2020 |
\*-----------------------------------------*/
#include "RGBFusionGPUController.h"
RGBFusionGPUController::RGBFusionGPUController(i2c_smbus_interface* bus, rgb_fusion_dev_id dev)
{
this->bus = bus;
this->dev = dev;
}
RGBFusionGPUController::~RGBFusionGPUController()
{
}
std::string RGBFusionGPUController::GetDeviceLocation()
{
std::string return_string(bus->device_name);
char addr[5];
snprintf(addr, 5, "0x%02X", dev);
return_string.append(", address ");
return_string.append(addr);
return(return_string);
}
void RGBFusionGPUController::SetColor(unsigned char red, unsigned char green, unsigned char blue)
{
bus->i2c_smbus_write_byte(dev, RGB_FUSION_GPU_REG_COLOR);
bus->i2c_smbus_write_byte(dev, red);
bus->i2c_smbus_write_byte(dev, green);
bus->i2c_smbus_write_byte(dev, blue);
}
void RGBFusionGPUController::SetMode(unsigned char mode, unsigned char speed)
{
bus->i2c_smbus_write_byte(dev, RGB_FUSION_GPU_REG_MODE);
bus->i2c_smbus_write_byte(dev, mode);
bus->i2c_smbus_write_byte(dev, speed);
bus->i2c_smbus_write_byte(dev, 0x63);
}
@@ -0,0 +1,54 @@
/*-----------------------------------------*\
| RGBFusionGPUController.h |
| |
| Definitions and types for Gigabyte Aorus |
| RGB Fusion GPU lighting controller |
| |
| Adam Honse (CalcProgrammer1) 2/20/2020 |
\*-----------------------------------------*/
#include <string>
#include "i2c_smbus.h"
#pragma once
typedef unsigned char rgb_fusion_dev_id;
enum
{
RGB_FUSION_GPU_REG_COLOR = 0x40,
RGB_FUSION_GPU_REG_MODE = 0x88
};
enum
{
RGB_FUSION_GPU_MODE_STATIC = 0x01,
RGB_FUSION_GPU_MODE_BREATHING = 0x02,
RGB_FUSION_GPU_MODE_FLASHING = 0x04,
RGB_FUSION_GPU_MODE_DUAL_FLASHING = 0x08,
RGB_FUSION_GPU_MODE_SPECTRUM_CYCLE = 0x11
};
enum
{
RGB_FUSION_GPU_SPEED_SLOWEST = 0x00,
RGB_FUSION_GPU_SPEED_NORMAL = 0x05,
RGB_FUSION_GPU_SPEED_FASTEST = 0x09
};
class RGBFusionGPUController
{
public:
RGBFusionGPUController(i2c_smbus_interface* bus, rgb_fusion_dev_id dev);
~RGBFusionGPUController();
std::string GetDeviceLocation();
void SetColor(unsigned char red, unsigned char green, unsigned char blue);
void SetMode(unsigned char mode, unsigned char speed);
private:
i2c_smbus_interface* bus;
rgb_fusion_dev_id dev;
};
@@ -0,0 +1,83 @@
#include "RGBFusionGPUController.h"
#include "RGBController.h"
#include "RGBController_RGBFusionGPU.h"
#include "i2c_smbus.h"
#include <vector>
#include <stdio.h>
#include <stdlib.h>
/******************************************************************************************\
* *
* TestForRGBFusionGPUController *
* *
* Tests the given address to see if an RGB Fusion controller exists there. First *
* does a quick write to test for a response *
* *
\******************************************************************************************/
bool TestForRGBFusionGPUController(i2c_smbus_interface* bus, unsigned char address)
{
bool pass = false;
int res;
//Write out 0xAB 0x00 0x00 0x00 sequence
res = bus->i2c_smbus_write_byte(address, 0xAB);
if (res >= 0)
{
bus->i2c_smbus_write_byte(address, 0x00);
bus->i2c_smbus_write_byte(address, 0x00);
bus->i2c_smbus_write_byte(address, 0x00);
pass = true;
res = bus->i2c_smbus_read_byte(address);
if (res != 0xAB)
{
pass = false;
}
res = bus->i2c_smbus_read_byte(address);
if(res != 0x14)
{
pass = false;
}
bus->i2c_smbus_read_byte(address);
bus->i2c_smbus_read_byte(address);
}
return(pass);
} /* TestForRGBFusionGPUController() */
/******************************************************************************************\
* *
* DetectRGBFusionGPUControllers *
* *
* Detect RGB Fusion controllers on the enumerated I2C busses at address 0x47. *
* *
* bus - pointer to i2c_smbus_interface where RGB Fusion device is connected *
* dev - I2C address of RGB Fusion device *
* *
\******************************************************************************************/
void DetectRGBFusionGPUControllers(std::vector<i2c_smbus_interface*>& busses, std::vector<RGBController*>& rgb_controllers)
{
RGBFusionGPUController* new_rgb_fusion;
RGBController_RGBFusionGPU* new_controller;
for (unsigned int bus = 0; bus < busses.size(); bus++)
{
// Check for RGB Fusion controller at 0x47
if (TestForRGBFusionGPUController(busses[bus], 0x47))
{
new_rgb_fusion = new RGBFusionGPUController(busses[bus], 0x47);
new_controller = new RGBController_RGBFusionGPU(new_rgb_fusion);
rgb_controllers.push_back(new_controller);
}
}
} /* DetectRGBFusionGPUControllers() */
@@ -0,0 +1,117 @@
#include "RedragonK556Controller.h"
#include "RedragonM711Controller.h"
#include "RGBController.h"
#include "RGBController_RedragonK556.h"
#include "RGBController_RedragonM711.h"
#include <vector>
#include <hidapi/hidapi.h>
/*-----------------------------------------------------*\
| Keyboard product IDs |
\*-----------------------------------------------------*/
#define REDRAGON_KEYBOARD_VID 0x0C45
#define REDRAGON_K550_PID 0x5204
#define REDRAGON_K556_PID 0x5004
/*-----------------------------------------------------*\
| Mouse product IDs |
\*-----------------------------------------------------*/
#define REDRAGON_MOUSE_VID 0x04D9
#define REDRAGON_M711_PID 0xFC30
#define REDRAGON_M715_PID 0xFC39
typedef struct
{
unsigned short usb_vid;
unsigned short usb_pid;
unsigned char usb_interface;
device_type type;
const char * name;
} redragon_device;
#define REDRAGON_NUM_DEVICES (sizeof(device_list) / sizeof(device_list[ 0 ]))
static const redragon_device device_list[] =
{
/*-----------------------------------------------------------------------------------------------------*\
| Keyboards |
\*-----------------------------------------------------------------------------------------------------*/
{ REDRAGON_KEYBOARD_VID, REDRAGON_K550_PID, 1, DEVICE_TYPE_KEYBOARD, "Redragon K550 Yama" },
{ REDRAGON_KEYBOARD_VID, REDRAGON_K556_PID, 1, DEVICE_TYPE_KEYBOARD, "Redragon K556 Devarajas" },
/*-----------------------------------------------------------------------------------------------------*\
| Mice |
\*-----------------------------------------------------------------------------------------------------*/
{ REDRAGON_MOUSE_VID, REDRAGON_M711_PID, 2, DEVICE_TYPE_MOUSE, "Redragon M711 Cobra" },
{ REDRAGON_MOUSE_VID, REDRAGON_M715_PID, 2, DEVICE_TYPE_MOUSE, "Redragon M715 Dagger" },
/*-----------------------------------------------------------------------------------------------------*\
| Mousemats |
\*-----------------------------------------------------------------------------------------------------*/
};
/******************************************************************************************\
* *
* DetectRedragonControllers *
* *
* Tests the USB address to see if a Redragon RGB Keyboard controller exists there. *
* *
\******************************************************************************************/
void DetectRedragonControllers(std::vector<RGBController*>& rgb_controllers)
{
hid_device_info* info;
hid_device* dev;
hid_init();
for(int device_idx = 0; device_idx < REDRAGON_NUM_DEVICES; device_idx++)
{
dev = NULL;
info = hid_enumerate(device_list[device_idx].usb_vid, device_list[device_idx].usb_pid);
//Look for Redragon RGB Peripheral
while(info)
{
if((info->vendor_id == device_list[device_idx].usb_vid)
&&(info->product_id == device_list[device_idx].usb_pid)
&&(info->interface_number == device_list[device_idx].usb_interface))
{
dev = hid_open_path(info->path);
break;
}
else
{
info = info->next;
}
}
if( dev )
{
switch(device_list[device_idx].type)
{
case DEVICE_TYPE_KEYBOARD:
{
RedragonK556Controller* controller = new RedragonK556Controller(dev);
RGBController_RedragonK556* rgb_controller = new RGBController_RedragonK556(controller);
rgb_controller->name = device_list[device_idx].name;
rgb_controllers.push_back(rgb_controller);
}
break;
case DEVICE_TYPE_MOUSE:
{
RedragonM711Controller* controller = new RedragonM711Controller(dev);
RGBController_RedragonM711* rgb_controller = new RGBController_RedragonM711(controller);
rgb_controller->name = device_list[device_idx].name;
rgb_controllers.push_back(rgb_controller);
}
break;
}
}
}
}
@@ -0,0 +1,226 @@
#include "RedragonK556Controller.h"
#include <cstring>
RedragonK556Controller::RedragonK556Controller(hid_device* dev_handle)
{
dev = dev_handle;
}
void RedragonK556Controller::SetKeyboardColors
(
unsigned char * color_data,
unsigned int size
)
{
unsigned int packet_size = 0;
unsigned int packet_offset = 0;
while(size > 0)
{
if(size >= REDRAGON_K556_MAX_PACKET_SIZE)
{
packet_size = REDRAGON_K556_MAX_PACKET_SIZE;
}
else
{
packet_size = size;
}
SendKeyboardData
(
&color_data[packet_offset],
packet_size,
packet_offset
);
size -= packet_size;
packet_offset += packet_size;
}
}
void RedragonK556Controller::SendKeyboardMode
(
unsigned char mode
)
{
SendKeyboardParameter(REDRAGON_K556_PARAMETER_MODE, 1, &mode);
}
void RedragonK556Controller::SendKeyboardModeEx
(
unsigned char mode,
unsigned char brightness,
unsigned char speed,
unsigned char direction,
unsigned char random_flag,
unsigned char red,
unsigned char green,
unsigned char blue
)
{
unsigned char parameter_data[8];
parameter_data[0] = mode;
parameter_data[1] = brightness;
parameter_data[2] = speed;
parameter_data[3] = direction;
parameter_data[4] = random_flag;
parameter_data[5] = red;
parameter_data[6] = green;
parameter_data[7] = blue;
SendKeyboardParameter(0, 8, parameter_data);
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void RedragonK556Controller::ComputeChecksum
(
char usb_buf[64]
)
{
unsigned short checksum = 0;
for(unsigned int byte_idx = 0x03; byte_idx < 64; byte_idx++)
{
checksum += usb_buf[byte_idx];
}
usb_buf[0x01] = checksum & 0xFF;
usb_buf[0x02] = checksum >> 8;
}
void RedragonK556Controller::SendKeyboardBegin()
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Keyboard Begin (0x01) packet |
| Note: Not computing checksum as packet contents are |
| fixed |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x04;
usb_buf[0x01] = REDRAGON_K556_COMMAND_BEGIN;
usb_buf[0x02] = 0x00;
usb_buf[0x03] = REDRAGON_K556_COMMAND_BEGIN;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, (unsigned char *)usb_buf, 64);
hid_read(dev, (unsigned char *)usb_buf, 64);
}
void RedragonK556Controller::SendKeyboardEnd()
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Keyboard End (0x02) packet |
| Note: Not computing checksum as packet contents are |
| fixed |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x04;
usb_buf[0x01] = REDRAGON_K556_COMMAND_END;
usb_buf[0x02] = 0x00;
usb_buf[0x03] = REDRAGON_K556_COMMAND_END;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, (unsigned char *)usb_buf, 64);
hid_read(dev, (unsigned char *)usb_buf, 64);
}
void RedragonK556Controller::SendKeyboardData
(
unsigned char * data,
unsigned char data_size,
unsigned short data_offset
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Keyboard Color Data (0x11) packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x04;
usb_buf[0x03] = 0x11;
usb_buf[0x04] = data_size;
usb_buf[0x05] = data_offset & 0x00FF;
usb_buf[0x06] = data_offset >> 8;
/*-----------------------------------------------------*\
| Copy in data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x08], data, data_size);
/*-----------------------------------------------------*\
| Compute Checksum |
\*-----------------------------------------------------*/
ComputeChecksum(usb_buf);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, (unsigned char *)usb_buf, 64);
hid_read(dev, (unsigned char *)usb_buf, 64);
}
void RedragonK556Controller::SendKeyboardParameter
(
unsigned char parameter,
unsigned char parameter_size,
unsigned char* parameter_data
)
{
char usb_buf[64];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Keyboard Parameter (0x06) packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x04;
usb_buf[0x03] = REDRAGON_K556_COMMAND_SET_PARAMETER;
usb_buf[0x04] = parameter_size;
usb_buf[0x05] = parameter;
/*-----------------------------------------------------*\
| Copy in data bytes |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x08], parameter_data, parameter_size);
/*-----------------------------------------------------*\
| Compute Checksum |
\*-----------------------------------------------------*/
ComputeChecksum(usb_buf);
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
hid_write(dev, (unsigned char *)usb_buf, 64);
hid_read(dev, (unsigned char *)usb_buf, 64);
}
@@ -0,0 +1,146 @@
/*-----------------------------------------*\
| RedragonK556Controller.h |
| |
| Definitions and types for Redragon K556 |
| Devarajas keyboard lighting controller |
| |
| Adam Honse (CalcProgrammer1) 3/15/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
#define REDRAGON_K556_MAX_PACKET_SIZE ( 0x36 ) /* max packet size for color*/
/* update packets */
enum
{
REDRAGON_K556_COMMAND_BEGIN = 0x01, /* Begin packet command */
REDRAGON_K556_COMMAND_END = 0x02, /* End packet command */
REDRAGON_K556_COMMAND_SET_PARAMETER = 0x06, /* Set parameter command */
REDRAGON_K556_COMMAND_READ_CUSTOM_COLOR_DATA = 0x10, /* Read custom color data */
REDRAGON_K556_COMMAND_WRITE_CUSTOM_COLOR_DATA = 0x11, /* Write custom color data */
};
enum
{
REDRAGON_K556_PARAMETER_MODE = 0x00, /* Mode parameter */
REDRAGON_K556_PARAMETER_BRIGHTNESS = 0x01, /* Brightness parameter */
REDRAGON_K556_PARAMETER_SPEED = 0x02, /* Speed parameter */
REDRAGON_K556_PARAMETER_DIRECTION = 0x03, /* Direction parameter */
REDRAGON_K556_PARAMETER_RANDOM_COLOR_FLAG = 0x04, /* Random color parameter */
REDRAGON_K556_PARAMETER_MODE_COLOR = 0x05, /* Mode color (RGB) */
REDRAGON_K556_PARAMETER_POLLING_RATE = 0x0F, /* Polling rate */
REDRAGON_K556_PARAMETER_SURMOUNT_MODE_COLOR = 0x11, /* Surmount mode color */
};
enum
{
REDRAGON_K556_MODE_COLOR_WAVE_SHORT = 0x01, /* "Go with the stream" */
REDRAGON_K556_MODE_COLOR_WAVE_LONG = 0x02, /* "Clouds fly" */
REDRAGON_K556_MODE_COLOR_WHEEL = 0x03, /* "Winding paths" */
REDRAGON_K556_MODE_SPECTRUM_CYCLE = 0x04, /* "The trial of light" */
REDRAGON_K556_MODE_BREATHING = 0x05, /* "Breathing" */
REDRAGON_K556_MODE_STATIC = 0x06, /* "Normally on" */
REDRAGON_K556_MODE_REACTIVE = 0x07, /* "Pass without trace" */
REDRAGON_K556_MODE_REACTIVE_RIPPLE = 0x08, /* "Ripple graff" */
REDRAGON_K556_MODE_REACTIVE_LINE = 0x09, /* "Fast run without trace" */
REDRAGON_K556_MODE_STARLIGHT_FAST = 0x0A, /* "Swift action" */
REDRAGON_K556_MODE_BLOOMING = 0x0B, /* "Flowers blooming" */
REDRAGON_K556_MODE_RAINBOW_WAVE_VERTICAL = 0x0C, /* "Snow winter jasmine" */
REDRAGON_K556_MODE_HURRICANE = 0x0D, /* "Hurricane" */
REDRAGON_K556_MODE_ACCUMULATE = 0x0E, /* "Accumulate" */
REDRAGON_K556_MODE_STARLIGHT_SLOW = 0x0F, /* "Digital times" */
REDRAGON_K556_MODE_VISOR = 0x10, /* "Both ways" */
REDRAGON_K556_MODE_SURMOUNT = 0x11, /* "Surmount" */
REDRAGON_K556_MODE_RAINBOW_WAVE_CIRCLE = 0x12, /* "Fast and the Furious" */
REDRAGON_K556_MODE_CUSTOM = 0x14, /* "Coastal" */
};
enum
{
REDRAGON_K556_BRIGHTNESS_LOWEST = 0x00, /* Lowest brightness (off) */
REDRAGON_K556_BRIGHTNESS_HIGHEST = 0x05, /* Highest brightness */
};
enum
{
REDRAGON_K556_SPEED_SLOWEST = 0x05, /* Slowest speed setting */
REDRAGON_K556_SPEED_NORMAL = 0x03, /* Normal speed setting */
REDRAGON_K556_SPEED_FASTEST = 0x00, /* Fastest speed setting */
};
enum
{
REDRAGON_K556_SURMOUNT_MODE_COLOR_RED = 0x01, /* Red surmount color */
REDRAGON_K556_SURMOUNT_MODE_COLOR_YELLOW = 0x02, /* Yellow surmount color */
REDRAGON_K556_SURMOUNT_MODE_COLOR_GREEN = 0x03, /* Green surmount color */
REDRAGON_K556_SURMOUNT_MODE_COLOR_BLUE = 0x04, /* Blue surmount color */
};
enum
{
REDRAGON_K556_POLLING_RATE_125HZ = 0x00, /* 125Hz polling rate */
REDRAGON_K556_POLLING_RATE_250HZ = 0x01, /* 250Hz polling rate */
REDRAGON_K556_POLLING_RATE_500HZ = 0x02, /* 500Hz polling rate */
REDRAGON_K556_POLLING_RATE_1000HZ = 0x03, /* 1000Hz polling rate */
};
class RedragonK556Controller
{
public:
RedragonK556Controller(hid_device* dev_handle);
~RedragonK556Controller();
void SetKeyboardColors
(
unsigned char * color_data,
unsigned int size
);
void SendKeyboardBegin();
void SendKeyboardMode
(
unsigned char mode
);
void SendKeyboardModeEx
(
unsigned char mode,
unsigned char brightness,
unsigned char speed,
unsigned char direction,
unsigned char random_flag,
unsigned char red,
unsigned char green,
unsigned char blue
);
void SendKeyboardData
(
unsigned char * data,
unsigned char data_size,
unsigned short data_offset
);
void SendKeyboardEnd();
private:
hid_device* dev;
void ComputeChecksum
(
char usb_buf[64]
);
void SendKeyboardParameter
(
unsigned char parameter,
unsigned char parameter_size,
unsigned char* parameter_data
);
};
@@ -0,0 +1,90 @@
#include "RedragonM711Controller.h"
#include <cstring>
static void send_usb_msg(hid_device* dev, char * data_pkt, unsigned int size)
{
char* usb_pkt = new char[size + 1];
usb_pkt[0] = 0x00;
for(int i = 1; i < size + 1; i++)
{
usb_pkt[i] = data_pkt[i-1];
}
hid_send_feature_report(dev, (unsigned char *)usb_pkt, size + 1);
delete usb_pkt;
}
RedragonM711Controller::RedragonM711Controller(hid_device* dev_handle)
{
dev = dev_handle;
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void RedragonM711Controller::SendMouseApply()
{
char usb_buf[16];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Apply packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x02;
usb_buf[0x01] = 0xF1;
usb_buf[0x02] = 0x02;
usb_buf[0x03] = 0x04;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf, 16);
}
void RedragonM711Controller::SendMouseMode
(
unsigned char mode,
unsigned char speed,
unsigned char red,
unsigned char green,
unsigned char blue
)
{
char usb_buf[16];
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Lighting Control packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x02;
usb_buf[0x01] = 0xF3;
usb_buf[0x02] = 0x49;
usb_buf[0x03] = 0x04;
usb_buf[0x04] = 0x06;
usb_buf[0x08] = red;
usb_buf[0x09] = green;
usb_buf[0x0A] = blue;
usb_buf[0x0B] = 0x01; //on
usb_buf[0x0C] = speed;
usb_buf[0x0D] = mode;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
send_usb_msg(dev, usb_buf, 16);
}
@@ -0,0 +1,46 @@
/*-----------------------------------------*\
| RedragonM711Controller.h |
| |
| Definitions and types for Redragon M711 |
| Cobra mouse lighting controller |
| |
| Adam Honse (CalcProgrammer1) 3/15/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <string>
#include <hidapi/hidapi.h>
#pragma once
enum
{
REDRAGON_M711_MODE_WAVE = 0x00,
REDRAGON_M711_MODE_RANDOM_BREATHING = 0x01,
REDRAGON_M711_MODE_STATIC = 0x02,
REDRAGON_M711_MODE_BREATHING = 0x04,
REDRAGON_M711_MODE_RAINBOW = 0x08,
REDRAGON_M711_MODE_FLASHING = 0x10,
};
class RedragonM711Controller
{
public:
RedragonM711Controller(hid_device* dev_handle);
~RedragonM711Controller();
void SendMouseApply();
void SendMouseMode
(
unsigned char mode,
unsigned char speed,
unsigned char red,
unsigned char green,
unsigned char blue
);
private:
hid_device* dev;
};
@@ -0,0 +1,111 @@
/*-----------------------------------------*\
| ThermaltakeRiingController.cpp |
| |
| Definitions and types for Thermaltake |
| Riing Plus lighting controller |
| |
| Adam Honse (CalcProgrammer1) 2/7/2020 |
\*-----------------------------------------*/
#include "ThermaltakeRiingController.h"
#include <cstring>
ThermaltakeRiingController::ThermaltakeRiingController(libusb_device_handle* dev_handle)
{
dev = dev_handle;
SendInit();
}
ThermaltakeRiingController::~ThermaltakeRiingController()
{
}
void ThermaltakeRiingController::SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors)
{
unsigned char* color_data = new unsigned char[3 * num_colors];
for(std::size_t color = 0; color < num_colors; color++)
{
int color_idx = color * 3;
color_data[color_idx + 0] = RGBGetGValue(colors[color]);
color_data[color_idx + 1] = RGBGetRValue(colors[color]);
color_data[color_idx + 2] = RGBGetBValue(colors[color]);
}
SendRGB(channel + 1, current_mode, current_speed, num_colors, color_data);
delete[] color_data;
}
void ThermaltakeRiingController::SetMode(unsigned char mode, unsigned char speed)
{
current_mode = mode;
current_speed = speed;
}
/*-------------------------------------------------------------------------------------------------*\
| Private packet sending functions. |
\*-------------------------------------------------------------------------------------------------*/
void ThermaltakeRiingController::SendInit()
{
unsigned char usb_buf[64];
int actual;
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up Init packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0xFE;
usb_buf[0x01] = 0x33;
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x81, usb_buf, 64, &actual, 0);
}
void ThermaltakeRiingController::SendRGB
(
unsigned char port,
unsigned char mode,
unsigned char speed,
unsigned char num_colors,
unsigned char* color_data
)
{
unsigned char usb_buf[64];
int actual;
/*-----------------------------------------------------*\
| Zero out buffer |
\*-----------------------------------------------------*/
memset(usb_buf, 0x00, sizeof(usb_buf));
/*-----------------------------------------------------*\
| Set up RGB packet |
\*-----------------------------------------------------*/
usb_buf[0x00] = 0x32;
usb_buf[0x01] = 0x52;
usb_buf[0x02] = port;
usb_buf[0x03] = mode + ( speed & 0x03 );
/*-----------------------------------------------------*\
| Copy in GRB color data |
\*-----------------------------------------------------*/
memcpy(&usb_buf[0x04], color_data, (num_colors * 3));
/*-----------------------------------------------------*\
| Send packet |
\*-----------------------------------------------------*/
libusb_interrupt_transfer(dev, 0x01, usb_buf, 64, &actual, 0);
libusb_interrupt_transfer(dev, 0x81, usb_buf, 64, &actual, 0);
}
@@ -0,0 +1,75 @@
/*-----------------------------------------*\
| ThermaltakeRiingController.h |
| |
| Definitions and types for Thermaltake |
| Riing Plus lighting controller |
| |
| Adam Honse (CalcProgrammer1) 2/7/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include <vector>
#include <libusb-1.0/libusb.h>
#pragma once
enum
{
THERMALTAKE_PORT_1 = 0x01,
THERMALTAKE_PORT_2 = 0x02,
THERMALTAKE_PORT_3 = 0x03,
THERMALTAKE_PORT_4 = 0x04,
THERMALTAKE_PORT_5 = 0x05
};
enum
{
THERMALTAKE_MODE_FLOW = 0x00,
THERMALTAKE_MODE_SPECTRUM = 0x04,
THERMALTAKE_MODE_RIPPLE = 0x08,
THERMALTAKE_MODE_BLINK = 0x0C,
THERMALTAKE_MODE_PULSE = 0x10,
THERMALTAKE_MODE_WAVE = 0x14,
THERMALTAKE_MODE_PER_LED = 0x18,
THERMALTAKE_MODE_FULL = 0x19
};
enum
{
THERMALTAKE_SPEED_SLOW = 0x03,
THERMALTAKE_SPEED_NORMAL = 0x02,
THERMALTAKE_SPEED_FAST = 0x01,
THERMALTAKE_SPEED_EXTREME = 0x00
};
#define THERMALTAKE_NUM_CHANNELS 5
class ThermaltakeRiingController
{
public:
ThermaltakeRiingController(libusb_device_handle* dev_handle);
~ThermaltakeRiingController();
void SetChannelLEDs(unsigned char channel, RGBColor * colors, unsigned int num_colors);
void SetMode(unsigned char mode, unsigned char speed);
private:
libusb_device_handle* dev;
unsigned char current_mode;
unsigned char current_speed;
void SendInit();
void SendRGB
(
unsigned char port,
unsigned char mode,
unsigned char speed,
unsigned char num_colors,
unsigned char* color_data
);
void SendFan();
void SendSave();
};
@@ -0,0 +1,41 @@
#include "ThermaltakeRiingController.h"
#include "RGBController.h"
#include "RGBController_ThermaltakeRiing.h"
#include <vector>
#include <libusb-1.0/libusb.h>
#define THERMALTAKE_RIING_VID 0x264A
#define THERMALTAKE_RIING_PID_BEGIN 0x1FA5
#define THERMALTAKE_RIING_PID_END 0x1FB5
/******************************************************************************************\
* *
* DetectThermaltakeRiingControllers *
* *
* Tests the USB address to see if an AMD Wraith Prism controller exists there. *
* *
\******************************************************************************************/
void DetectThermaltakeRiingControllers(std::vector<RGBController*>& rgb_controllers)
{
libusb_context * ctx;
libusb_init(&ctx);
for(int pid = THERMALTAKE_RIING_PID_BEGIN; pid <= THERMALTAKE_RIING_PID_END; pid++)
{
//Look for Thermaltake Riing device
libusb_device_handle * dev = libusb_open_device_with_vid_pid(ctx, THERMALTAKE_RIING_VID, pid);
if( dev )
{
libusb_detach_kernel_driver(dev, 0);
libusb_claim_interface(dev, 0);
ThermaltakeRiingController* controller = new ThermaltakeRiingController(dev);
RGBController_ThermaltakeRiing* rgb_controller = new RGBController_ThermaltakeRiing(controller);
rgb_controllers.push_back(rgb_controller);
}
}
}
+569
View File
@@ -0,0 +1,569 @@
/*-----------------------------------------*\
| NetworkClient.cpp |
| |
| Client code for OpenRGB SDK |
| |
| Adam Honse (CalcProgrammer1) 5/9/2020 |
\*-----------------------------------------*/
#include "NetworkClient.h"
#include "RGBController_Network.h"
#include <cstring>
#ifdef WIN32
#include <Windows.h>
#define MSG_NOSIGNAL 0
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
NetworkClient::NetworkClient(std::vector<RGBController *>& control) : controllers(control)
{
strcpy(port_ip, "127.0.0.1");
port_num = 1337;
server_connected = false;
server_controller_count = 0;
}
void NetworkClient::ClientInfoChanged()
{
ClientInfoChangeMutex.lock();
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
for(unsigned int callback_idx = 0; callback_idx < ClientInfoChangeCallbacks.size(); callback_idx++)
{
ClientInfoChangeCallbacks[callback_idx](ClientInfoChangeCallbackArgs[callback_idx]);
}
ClientInfoChangeMutex.unlock();
}
const char * NetworkClient::GetIP()
{
return(port_ip);
}
unsigned short NetworkClient::GetPort()
{
return port_num;
}
bool NetworkClient::GetOnline()
{
return server_connected;
}
void NetworkClient::RegisterClientInfoChangeCallback(NetClientCallback new_callback, void * new_callback_arg)
{
ClientInfoChangeCallbacks.push_back(new_callback);
ClientInfoChangeCallbackArgs.push_back(new_callback_arg);
}
void NetworkClient::SetIP(const char *new_ip)
{
if(server_connected == false)
{
strcpy(port_ip, new_ip);
}
}
void NetworkClient::SetName(const char *new_name)
{
client_name = new_name;
if(server_connected == true)
{
SendData_ClientString();
}
}
void NetworkClient::SetPort(unsigned short new_port)
{
if(server_connected == false)
{
port_num = new_port;
}
}
void NetworkClient::StartClient()
{
//Start a TCP server and launch threads
char port_str[6];
snprintf(port_str, 6, "%d", port_num);
port.tcp_client(port_ip, port_str);
//Start the connection thread
ConnectionThread = new std::thread(&NetworkClient::ConnectionThreadFunction, this);
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
void NetworkClient::StopClient()
{
}
void NetworkClient::ConnectionThreadFunction()
{
unsigned int requested_controllers;
//This thread manages the connection to the server
while(1)
{
if(server_connected == false)
{
//Connect to server and reconnect if the connection is lost
server_initialized = false;
//Try to connect to server
if(port.tcp_client_connect() == true)
{
client_sock = port.sock;
printf( "Connected to server\n" );
//Server is now connected
server_connected = true;
//Start the listener thread
ListenThread = new std::thread(&NetworkClient::ListenThreadFunction, this);
//Server is not initialized
server_initialized = false;
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
else
{
printf( "Connection attempt failed\n" );
}
}
if(server_initialized == false && server_connected == true)
{
requested_controllers = 0;
server_controller_count = 0;
//Wait for server to connect
Sleep(100);
//Once server is connected, send client string
SendData_ClientString();
//Request number of controllers
SendRequest_ControllerCount();
//Wait for server controller count
while(server_controller_count == 0)
{
Sleep(100);
}
printf("Client: Received controller count from server: %d\r\n", server_controller_count);
//Once count is received, request controllers
while(requested_controllers < server_controller_count)
{
printf("Client: Requesting controller %d\r\n", requested_controllers);
SendRequest_ControllerData(requested_controllers);
//Wait until controller is received
while(server_controllers.size() == requested_controllers)
{
Sleep(100);
}
requested_controllers++;
}
//All controllers received, add them to master list
printf("Client: All controllers received, adding them to master list\r\n");
for(std::size_t controller_idx = 0; controller_idx < server_controllers.size(); controller_idx++)
{
controllers.push_back(server_controllers[controller_idx]);
}
server_initialized = true;
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
Sleep(1000);
}
}
int NetworkClient::recv_select(SOCKET s, char *buf, int len, int flags)
{
fd_set set;
struct timeval timeout;
timeout.tv_sec = 5;
timeout.tv_usec = 0;
while(1)
{
FD_ZERO(&set); /* clear the set */
FD_SET(s, &set); /* add our file descriptor to the set */
int rv = select(s + 1, &set, NULL, NULL, &timeout);
if(rv == SOCKET_ERROR || server_connected == false)
{
return 0;
}
else if(rv == 0)
{
continue;
}
else
{
// socket has something to read
return(recv(s, buf, len, flags));
}
}
}
void NetworkClient::ListenThreadFunction()
{
printf("Network client listener started\n");
//This thread handles messages received from the server
while(server_connected = true)
{
NetPacketHeader header;
int bytes_read = 0;
char * data = NULL;
//Read first byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[0], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test first character of magic - 'O'
if(header.pkt_magic[0] != 'O')
{
continue;
}
//Read second byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[1], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test second character of magic - 'R'
if(header.pkt_magic[1] != 'R')
{
continue;
}
//Read third byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[2], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test third character of magic - 'G'
if(header.pkt_magic[2] != 'G')
{
continue;
}
//Read fourth byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[3], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test fourth character of magic - 'B'
if(header.pkt_magic[3] != 'B')
{
continue;
}
//If we get to this point, the magic is correct. Read the rest of the header
bytes_read = 0;
do
{
int tmp_bytes_read = 0;
tmp_bytes_read = recv_select(client_sock, (char *)&header.pkt_dev_idx + bytes_read, sizeof(header) - sizeof(header.pkt_magic) - bytes_read, 0);
bytes_read += tmp_bytes_read;
if(tmp_bytes_read <= 0)
{
goto listen_done;
}
} while(bytes_read != sizeof(header) - sizeof(header.pkt_magic));
//printf( "Client: Received header, now receiving data of size %d\r\n", header.pkt_size);
//Header received, now receive the data
if(header.pkt_size > 0)
{
bytes_read = 0;
data = new char[header.pkt_size];
do
{
int tmp_bytes_read = 0;
tmp_bytes_read = recv_select(client_sock, &data[bytes_read], header.pkt_size - bytes_read, 0);
if(tmp_bytes_read <= 0)
{
goto listen_done;
}
bytes_read += tmp_bytes_read;
} while (bytes_read < header.pkt_size);
}
//printf( "Client: Received header and data\r\n" );
//printf( "Client: Packet ID: %d \r\n", header.pkt_id);
//Entire request received, select functionality based on request ID
switch(header.pkt_id)
{
case NET_PACKET_ID_REQUEST_CONTROLLER_COUNT:
printf( "Client: NET_PACKET_ID_REQUEST_CONTROLLER_COUNT\r\n" );
ProcessReply_ControllerCount(header.pkt_size, data);
break;
case NET_PACKET_ID_REQUEST_CONTROLLER_DATA:
printf( "Client: NET_PACKET_ID_REQUEST_CONTROLLER_DATA\r\n");
ProcessReply_ControllerData(header.pkt_size, data, header.pkt_dev_idx);
break;
}
delete[] data;
}
listen_done:
printf( "Client socket has been closed");
server_initialized = false;
server_connected = false;
for(int server_controller_idx = 0; server_controller_idx < server_controllers.size(); server_controller_idx++)
{
for(int controller_idx = 0; controller_idx < controllers.size(); controller_idx++)
{
if(controllers[controller_idx] == server_controllers[server_controller_idx])
{
controllers.erase(controllers.begin() + controller_idx);
break;
}
}
delete server_controllers[server_controller_idx];
}
server_controllers.clear();
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
void NetworkClient::ProcessReply_ControllerCount(unsigned int data_size, char * data)
{
if(data_size == sizeof(unsigned int))
{
memcpy(&server_controller_count, data, sizeof(unsigned int));
}
}
void NetworkClient::ProcessReply_ControllerData(unsigned int data_size, char * data, unsigned int dev_idx)
{
RGBController_Network * new_controller = new RGBController_Network(this, dev_idx);
new_controller->ReadDeviceDescription((unsigned char *)data);
printf("Received controller: %s\r\n", new_controller->name.c_str());
server_controllers.push_back(new_controller);
}
void NetworkClient::SendData_ClientString()
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = 0;
reply_hdr.pkt_id = NET_PACKET_ID_SET_CLIENT_NAME;
reply_hdr.pkt_size = strlen(client_name.c_str()) + 1;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
send(client_sock, (char *)client_name.c_str(), reply_hdr.pkt_size, MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_ControllerCount()
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = 0;
reply_hdr.pkt_id = NET_PACKET_ID_REQUEST_CONTROLLER_COUNT;
reply_hdr.pkt_size = 0;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_ControllerData(unsigned int dev_idx)
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_REQUEST_CONTROLLER_DATA;
reply_hdr.pkt_size = 0;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_RGBController_ResizeZone(unsigned int dev_idx, int zone, int new_size)
{
NetPacketHeader reply_hdr;
int reply_data[2];
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_RGBCONTROLLER_RESIZEZONE;
reply_hdr.pkt_size = sizeof(reply_data);
reply_data[0] = zone;
reply_data[1] = new_size;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
send(client_sock, (char *)&reply_data, sizeof(reply_data), MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_RGBController_UpdateLEDs(unsigned int dev_idx, unsigned char * data, unsigned int size)
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_RGBCONTROLLER_UPDATELEDS;
reply_hdr.pkt_size = size;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
send(client_sock, (char *)data, size, 0);
}
void NetworkClient::SendRequest_RGBController_UpdateZoneLEDs(unsigned int dev_idx, unsigned char * data, unsigned int size)
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_RGBCONTROLLER_UPDATEZONELEDS;
reply_hdr.pkt_size = size;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
send(client_sock, (char *)data, size, MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_RGBController_UpdateSingleLED(unsigned int dev_idx, unsigned char * data, unsigned int size)
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_RGBCONTROLLER_UPDATESINGLELED;
reply_hdr.pkt_size = size;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
send(client_sock, (char *)data, size, MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_RGBController_SetCustomMode(unsigned int dev_idx)
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_RGBCONTROLLER_SETCUSTOMMODE;
reply_hdr.pkt_size = 0;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
}
void NetworkClient::SendRequest_RGBController_UpdateMode(unsigned int dev_idx, unsigned char * data, unsigned int size)
{
NetPacketHeader reply_hdr;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_RGBCONTROLLER_UPDATEMODE;
reply_hdr.pkt_size = size;
send(client_sock, (char *)&reply_hdr, sizeof(NetPacketHeader), MSG_NOSIGNAL);
send(client_sock, (char *)data, size, MSG_NOSIGNAL);
}
+85
View File
@@ -0,0 +1,85 @@
/*-----------------------------------------*\
| NetworkClient.h |
| |
| Client header for OpenRGB SDK |
| |
| Adam Honse (CalcProgrammer1) 5/9/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include "NetworkProtocol.h"
#include "net_port.h"
#include <mutex>
#include <thread>
#pragma once
typedef void (*NetClientCallback)(void *);
class NetworkClient
{
public:
NetworkClient(std::vector<RGBController *>& control);
void ClientInfoChanged();
const char * GetIP();
unsigned short GetPort();
bool GetOnline();
void RegisterClientInfoChangeCallback(NetClientCallback new_callback, void * new_callback_arg);
void SetIP(const char *new_ip);
void SetName(const char *new_name);
void SetPort(unsigned short new_port);
void StartClient();
void StopClient();
void ConnectionThreadFunction();
void ListenThreadFunction();
void ProcessReply_ControllerCount(unsigned int data_size, char * data);
void ProcessReply_ControllerData(unsigned int data_size, char * data, unsigned int dev_idx);
void SendData_ClientString();
void SendRequest_ControllerCount();
void SendRequest_ControllerData(unsigned int dev_idx);
void SendRequest_RGBController_ResizeZone(unsigned int dev_idx, int zone, int new_size);
void SendRequest_RGBController_UpdateLEDs(unsigned int dev_idx, unsigned char * data, unsigned int size);
void SendRequest_RGBController_UpdateZoneLEDs(unsigned int dev_idx, unsigned char * data, unsigned int size);
void SendRequest_RGBController_UpdateSingleLED(unsigned int dev_idx, unsigned char * data, unsigned int size);
void SendRequest_RGBController_SetCustomMode(unsigned int dev_idx);
void SendRequest_RGBController_UpdateMode(unsigned int dev_idx, unsigned char * data, unsigned int size);
std::vector<RGBController *> server_controllers;
protected:
std::vector<RGBController *>& controllers;
private:
SOCKET client_sock;
std::string client_name;
net_port port;
char port_ip[20];
unsigned short port_num;
bool server_connected;
bool server_initialized;
unsigned int server_controller_count;
std::thread * ConnectionThread;
std::thread * ListenThread;
std::mutex ClientInfoChangeMutex;
std::vector<NetClientCallback> ClientInfoChangeCallbacks;
std::vector<void *> ClientInfoChangeCallbackArgs;
int recv_select(SOCKET s, char *buf, int len, int flags);
};
+20
View File
@@ -0,0 +1,20 @@
#include "NetworkProtocol.h"
NetPacketHeader * InitNetPacketHeader
(
unsigned int pkt_dev_idx,
unsigned int pkt_id,
unsigned int pkt_size
)
{
NetPacketHeader * new_header = new NetPacketHeader;
new_header->pkt_magic[0] = 'O';
new_header->pkt_magic[1] = 'R';
new_header->pkt_magic[2] = 'G';
new_header->pkt_magic[3] = 'B';
new_header->pkt_dev_idx = pkt_dev_idx;
new_header->pkt_id = pkt_id;
new_header->pkt_size = pkt_size;
}
+39
View File
@@ -0,0 +1,39 @@
/*-----------------------------------------*\
| NetworkProtocol.h |
| |
| Protocol header for OpenRGB SDK |
| |
| Adam Honse (CalcProgrammer1) 5/9/2020 |
\*-----------------------------------------*/
#pragma once
typedef struct NetPacketHeader
{
char pkt_magic[4]; /* Magic value "ORGB" identifies beginning of packet */
unsigned int pkt_dev_idx; /* Device index */
unsigned int pkt_id; /* Packet ID */
unsigned int pkt_size; /* Packet size */
};
enum
{
/*----------------------------------------------------------------------------------------------------------*\
| Network requests |
\*----------------------------------------------------------------------------------------------------------*/
NET_PACKET_ID_REQUEST_CONTROLLER_COUNT = 0, /* Request RGBController device count from server */
NET_PACKET_ID_REQUEST_CONTROLLER_DATA = 1, /* Request RGBController data block */
NET_PACKET_ID_SET_CLIENT_NAME = 50, /* Send client name string to server */
/*----------------------------------------------------------------------------------------------------------*\
| RGBController class functions |
\*----------------------------------------------------------------------------------------------------------*/
NET_PACKET_ID_RGBCONTROLLER_RESIZEZONE = 1000, /* RGBController::ResizeZone() */
NET_PACKET_ID_RGBCONTROLLER_UPDATELEDS = 1050, /* RGBController::UpdateLEDs() */
NET_PACKET_ID_RGBCONTROLLER_UPDATEZONELEDS = 1051, /* RGBController::UpdateZoneLEDs() */
NET_PACKET_ID_RGBCONTROLLER_UPDATESINGLELED = 1052, /* RGBController::UpdateSingleLED() */
NET_PACKET_ID_RGBCONTROLLER_SETCUSTOMMODE = 1100, /* RGBController::SetCustomMode() */
NET_PACKET_ID_RGBCONTROLLER_UPDATEMODE = 1101, /* RGBController::UpdateMode() */
};
+611
View File
@@ -0,0 +1,611 @@
/*-----------------------------------------*\
| NetworkServer.cpp |
| |
| Server code for OpenRGB SDK |
| |
| Adam Honse (CalcProgrammer1) 5/9/2020 |
\*-----------------------------------------*/
#include "NetworkServer.h"
#include <cstring>
#ifndef WIN32
#include <sys/ioctl.h>
#include <netinet/tcp.h>
#include <sys/types.h>
#include <arpa/inet.h>
#else
#include <ws2tcpip.h>
#endif
#include <memory.h>
#include <errno.h>
#include <stdlib.h>
#include <iostream>
const char yes = 1;
#ifdef WIN32
#include <Windows.h>
#else
#include <unistd.h>
static void Sleep(unsigned int milliseconds)
{
usleep(1000 * milliseconds);
}
#endif
NetworkServer::NetworkServer(std::vector<RGBController *>& control) : controllers(control)
{
port_num = 1337;
server_online = false;
}
void NetworkServer::ClientInfoChanged()
{
ClientInfoChangeMutex.lock();
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
for(unsigned int callback_idx = 0; callback_idx < ClientInfoChangeCallbacks.size(); callback_idx++)
{
ClientInfoChangeCallbacks[callback_idx](ClientInfoChangeCallbackArgs[callback_idx]);
}
ClientInfoChangeMutex.unlock();
}
unsigned short NetworkServer::GetPort()
{
return port_num;
}
bool NetworkServer::GetOnline()
{
return server_online;
}
unsigned int NetworkServer::GetNumClients()
{
return ServerClients.size();
}
const char * NetworkServer::GetClientString(unsigned int client_num)
{
if(client_num < ServerClients.size())
{
return ServerClients[client_num]->client_string.c_str();
}
else
{
return "";
}
}
const char * NetworkServer::GetClientIP(unsigned int client_num)
{
if(client_num < ServerClients.size())
{
return ServerClients[client_num]->client_ip;
}
else
{
return "";
}
}
void NetworkServer::RegisterClientInfoChangeCallback(NetServerCallback new_callback, void * new_callback_arg)
{
ClientInfoChangeCallbacks.push_back(new_callback);
ClientInfoChangeCallbackArgs.push_back(new_callback_arg);
}
void NetworkServer::SetPort(unsigned short new_port)
{
if(server_online == false)
{
port_num = new_port;
}
}
void NetworkServer::StartServer()
{
//Start a TCP server and launch threads
char port_str[6];
snprintf(port_str, 6, "%d", port_num);
sockaddr_in myAddress;
/*-------------------------------------------------*\
| Windows requires WSAStartup before using sockets |
\*-------------------------------------------------*/
#ifdef WIN32
if (WSAStartup(MAKEWORD(2, 2), &wsa) != NO_ERROR)
{
WSACleanup();
return;
}
#endif
/*-------------------------------------------------*\
| Create the server socket |
\*-------------------------------------------------*/
server_sock = socket(AF_INET, SOCK_STREAM, 0);
if (server_sock == INVALID_SOCKET)
{
WSACleanup();
return;
}
/*-------------------------------------------------*\
| Fill in server address info with port value |
\*-------------------------------------------------*/
myAddress.sin_family = AF_INET;
myAddress.sin_addr.s_addr = inet_addr("0.0.0.0");
myAddress.sin_port = htons(atoi(port_str));
/*-------------------------------------------------*\
| Bind the server socket |
\*-------------------------------------------------*/
if (bind(server_sock, (sockaddr*)&myAddress, sizeof(myAddress)) == SOCKET_ERROR)
{
WSACleanup();
return;
}
/*-------------------------------------------------*\
| Set socket options - no delay |
\*-------------------------------------------------*/
setsockopt(server_sock, IPPROTO_TCP, TCP_NODELAY, &yes, sizeof(yes));
server_online = true;
/*-------------------------------------------------*\
| Start the connection thread |
\*-------------------------------------------------*/
ConnectionThread = new std::thread(&NetworkServer::ConnectionThreadFunction, this);
}
void NetworkServer::StopServer()
{
server_online = false;
for(unsigned int client_idx = 0; client_idx < ServerClients.size(); client_idx++)
{
shutdown(ServerClients[client_idx]->client_sock, SD_RECEIVE);
closesocket(ServerClients[client_idx]->client_sock);
ServerClients[client_idx]->client_listen_thread->join();
}
shutdown(server_sock, SD_RECEIVE);
closesocket(server_sock);
ConnectionThread->join();
for(unsigned int client_idx = 0; client_idx < ServerClients.size(); client_idx++)
{
delete ServerClients[client_idx];
}
ServerClients.clear();
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
void NetworkServer::ConnectionThreadFunction()
{
//This thread handles client connections
printf("Network connection thread started\n");
while(server_online == true)
{
/*-------------------------------------------------*\
| Create new socket for client connection |
\*-------------------------------------------------*/
NetworkClientInfo * client_info = new NetworkClientInfo();
/*-------------------------------------------------*\
| Listen for incoming client connection on the |
| server socket. This call blocks until a |
| connection is established |
\*-------------------------------------------------*/
if(listen(server_sock, 10) < 0)
{
printf("Connection thread closed\r\n");
server_online = false;
return;
}
/*-------------------------------------------------*\
| Accept the client connection |
\*-------------------------------------------------*/
struct sockaddr_in client_addr;
socklen_t client_addr_len = sizeof(client_addr);
client_info->client_sock = accept_select(server_sock, (struct sockaddr *)&client_addr, &client_addr_len);
if(client_info->client_sock < 0)
{
printf("Connection thread closed\r\n");
server_online = false;
return;
}
/*-------------------------------------------------*\
| Get the new client socket and store it in the |
| clients vector |
\*-------------------------------------------------*/
u_long arg = 0;
ioctlsocket(client_info->client_sock, FIONBIO, &arg);
setsockopt(client_info->client_sock, IPPROTO_TCP, TCP_NODELAY, &yes, sizeof(yes));
inet_ntop(AF_INET, &client_addr.sin_addr, client_info->client_ip, INET_ADDRSTRLEN);
client_info->client_string = "Client";
//Start a listener thread for the new client socket
client_info->client_listen_thread = new std::thread(&NetworkServer::ListenThreadFunction, this, client_info);
ServerClients.push_back(client_info);
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
printf("Connection thread closed\r\n");
server_online = false;
}
int NetworkServer::accept_select(int sockfd, struct sockaddr *addr, socklen_t *addrlen)
{
fd_set set;
struct timeval timeout;
timeout.tv_sec = 5;
timeout.tv_usec = 0;
while(1)
{
FD_ZERO(&set); /* clear the set */
FD_SET(sockfd, &set); /* add our file descriptor to the set */
int rv = select(sockfd + 1, &set, NULL, NULL, &timeout);
if(rv == SOCKET_ERROR || server_online == false)
{
return -1;
}
else if(rv == 0)
{
continue;
}
else
{
// socket has something to read
return(accept(sockfd, addr, addrlen));
}
}
}
int NetworkServer::recv_select(SOCKET s, char *buf, int len, int flags)
{
fd_set set;
struct timeval timeout;
timeout.tv_sec = 5;
timeout.tv_usec = 0;
while(1)
{
FD_ZERO(&set); /* clear the set */
FD_SET(s, &set); /* add our file descriptor to the set */
int rv = select(s + 1, &set, NULL, NULL, &timeout);
if(rv == SOCKET_ERROR || server_online == false)
{
return 0;
}
else if(rv == 0)
{
continue;
}
else
{
// socket has something to read
return(recv(s, buf, len, flags));
}
}
}
void NetworkServer::ListenThreadFunction(NetworkClientInfo * client_info)
{
SOCKET client_sock = client_info->client_sock;
printf("Network server started\n");
//This thread handles messages received from clients
while(server_online == true)
{
NetPacketHeader header;
int bytes_read = 0;
char * data = NULL;
//Read first byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[0], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test first character of magic - 'O'
if(header.pkt_magic[0] != 'O')
{
continue;
}
//Read second byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[1], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test second character of magic - 'R'
if(header.pkt_magic[1] != 'R')
{
continue;
}
//Read third byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[2], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test third character of magic - 'G'
if(header.pkt_magic[2] != 'G')
{
continue;
}
//Read fourth byte of magic
bytes_read = recv_select(client_sock, &header.pkt_magic[3], 1, 0);
if(bytes_read <= 0)
{
goto listen_done;
}
//Test fourth character of magic - 'B'
if(header.pkt_magic[3] != 'B')
{
continue;
}
//If we get to this point, the magic is correct. Read the rest of the header
bytes_read = 0;
do
{
int tmp_bytes_read = 0;
tmp_bytes_read = recv_select(client_sock, (char *)&header.pkt_dev_idx + bytes_read, sizeof(header) - sizeof(header.pkt_magic) - bytes_read, 0);
bytes_read += tmp_bytes_read;
if(tmp_bytes_read <= 0)
{
goto listen_done;
}
} while(bytes_read != sizeof(header) - sizeof(header.pkt_magic));
//printf( "Server: Received header, now receiving data of size %d\r\n", header.pkt_size);
//Header received, now receive the data
if(header.pkt_size > 0)
{
bytes_read = 0;
data = new char[header.pkt_size];
do
{
int tmp_bytes_read = 0;
tmp_bytes_read = recv_select(client_sock, &data[bytes_read], header.pkt_size - bytes_read, 0);
if(tmp_bytes_read <= 0)
{
goto listen_done;
}
bytes_read += tmp_bytes_read;
} while (bytes_read < header.pkt_size);
}
//printf( "Server: Received header and data\r\n" );
//printf( "Server: Packet ID: %d \r\n", header.pkt_id);
//Entire request received, select functionality based on request ID
switch(header.pkt_id)
{
case NET_PACKET_ID_REQUEST_CONTROLLER_COUNT:
//printf( "NET_PACKET_ID_REQUEST_CONTROLLER_COUNT\r\n" );
SendReply_ControllerCount(client_sock);
break;
case NET_PACKET_ID_REQUEST_CONTROLLER_DATA:
//printf( "NET_PACKET_ID_REQUEST_CONTROLLER_DATA\r\n" );
SendReply_ControllerData(client_sock, header.pkt_dev_idx);
break;
case NET_PACKET_ID_SET_CLIENT_NAME:
printf( "NET_PACKET_ID_SET_CLIENT_NAME\r\n" );
ProcessRequest_ClientString(client_sock, header.pkt_size, data);
break;
case NET_PACKET_ID_RGBCONTROLLER_RESIZEZONE:
//printf( "NET_PACKET_ID_RGBCONTROLLER_RESIZEZONE\r\n" );
if((header.pkt_dev_idx < controllers.size()) && (header.pkt_size == (2 * sizeof(int))))
{
int zone;
int new_size;
memcpy(&zone, data, sizeof(int));
memcpy(&new_size, data + sizeof(int), sizeof(int));
controllers[header.pkt_dev_idx]->ResizeZone(zone, new_size);
}
break;
case NET_PACKET_ID_RGBCONTROLLER_UPDATELEDS:
//printf( "NET_PACKET_ID_RGBCONTROLLER_UPDATELEDS\r\n" );
if(header.pkt_dev_idx < controllers.size())
{
controllers[header.pkt_dev_idx]->SetColorDescription((unsigned char *)data);
controllers[header.pkt_dev_idx]->UpdateLEDs();
}
break;
case NET_PACKET_ID_RGBCONTROLLER_UPDATEZONELEDS:
//printf( "NET_PACKET_ID_RGBCONTROLLER_UPDATEZONELEDS\r\n" );
if(header.pkt_dev_idx < controllers.size())
{
int zone;
memcpy(&zone, &data[sizeof(unsigned int)], sizeof(int));
controllers[header.pkt_dev_idx]->SetZoneColorDescription((unsigned char *)data);
controllers[header.pkt_dev_idx]->UpdateZoneLEDs(zone);
}
break;
case NET_PACKET_ID_RGBCONTROLLER_UPDATESINGLELED:
//printf( "NET_PACKET_ID_RGBCONTROLLER_UPDATESINGLELED\r\n" );
if(header.pkt_dev_idx < controllers.size())
{
int led;
memcpy(&led, data, sizeof(int));
controllers[header.pkt_dev_idx]->SetSingleLEDColorDescription((unsigned char *)data);
controllers[header.pkt_dev_idx]->UpdateSingleLED(led);
}
break;
case NET_PACKET_ID_RGBCONTROLLER_SETCUSTOMMODE:
//printf( "NET_PACKET_ID_RGBCONTROLLER_SETCUSTOMMODE\r\n" );
if(header.pkt_dev_idx < controllers.size())
{
controllers[header.pkt_dev_idx]->SetCustomMode();
}
break;
case NET_PACKET_ID_RGBCONTROLLER_UPDATEMODE:
//printf( "NET_PACKET_ID_RGBCONTROLLER_UPDATEMODE\r\n" );
if(header.pkt_dev_idx < controllers.size())
{
controllers[header.pkt_dev_idx]->SetModeDescription((unsigned char *)data);
controllers[header.pkt_dev_idx]->UpdateMode();
}
break;
}
delete[] data;
}
listen_done:
printf("Server connection closed\r\n");
shutdown(client_info->client_sock, SD_RECEIVE);
closesocket(client_info->client_sock);
for(unsigned int this_idx = 0; this_idx < ServerClients.size(); this_idx++)
{
if(ServerClients[this_idx] == client_info)
{
ServerClients.erase(ServerClients.begin() + this_idx);
break;
}
}
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
void NetworkServer::ProcessRequest_ClientString(SOCKET client_sock, unsigned int data_size, char * data)
{
for(unsigned int this_idx = 0; this_idx < ServerClients.size(); this_idx++)
{
if(ServerClients[this_idx]->client_sock == client_sock)
{
ServerClients[this_idx]->client_string = data;
break;
}
}
/*-------------------------------------------------*\
| Client info has changed, call the callbacks |
\*-------------------------------------------------*/
ClientInfoChanged();
}
void NetworkServer::SendReply_ControllerCount(SOCKET client_sock)
{
NetPacketHeader reply_hdr;
unsigned int reply_data;
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = 0;
reply_hdr.pkt_id = NET_PACKET_ID_REQUEST_CONTROLLER_COUNT;
reply_hdr.pkt_size = sizeof(unsigned int);
reply_data = controllers.size();
send(client_sock, (const char *)&reply_hdr, sizeof(NetPacketHeader), 0);
send(client_sock, (const char *)&reply_data, sizeof(unsigned int), 0);
}
void NetworkServer::SendReply_ControllerData(SOCKET client_sock, unsigned int dev_idx)
{
if(dev_idx < controllers.size())
{
NetPacketHeader reply_hdr;
unsigned char *reply_data = controllers[dev_idx]->GetDeviceDescription();
unsigned int reply_size;
memcpy(&reply_size, reply_data, sizeof(reply_size));
reply_hdr.pkt_magic[0] = 'O';
reply_hdr.pkt_magic[1] = 'R';
reply_hdr.pkt_magic[2] = 'G';
reply_hdr.pkt_magic[3] = 'B';
reply_hdr.pkt_dev_idx = dev_idx;
reply_hdr.pkt_id = NET_PACKET_ID_REQUEST_CONTROLLER_DATA;
reply_hdr.pkt_size = reply_size;
send(client_sock, (const char *)&reply_hdr, sizeof(NetPacketHeader), 0);
send(client_sock, (const char *)reply_data, reply_size, 0);
}
}
+77
View File
@@ -0,0 +1,77 @@
/*-----------------------------------------*\
| NetworkServer.h |
| |
| Server header for OpenRGB SDK |
| |
| Adam Honse (CalcProgrammer1) 5/9/2020 |
\*-----------------------------------------*/
#include "RGBController.h"
#include "NetworkProtocol.h"
#include "net_port.h"
#include <mutex>
#include <thread>
#pragma once
typedef void (*NetServerCallback)(void *);
struct NetworkClientInfo
{
SOCKET client_sock;
std::thread * client_listen_thread;
std::string client_string;
char client_ip[INET_ADDRSTRLEN];
};
class NetworkServer
{
public:
NetworkServer(std::vector<RGBController *>& control);
unsigned short GetPort();
bool GetOnline();
unsigned int GetNumClients();
const char * GetClientString(unsigned int client_num);
const char * GetClientIP(unsigned int client_num);
void ClientInfoChanged();
void RegisterClientInfoChangeCallback(NetServerCallback, void * new_callback_arg);
void SetPort(unsigned short new_port);
void StartServer();
void StopServer();
void ConnectionThreadFunction();
void ListenThreadFunction(NetworkClientInfo * client_sock);
void ProcessRequest_ClientString(SOCKET client_sock, unsigned int data_size, char * data);
void SendReply_ControllerCount(SOCKET client_sock);
void SendReply_ControllerData(SOCKET client_sock, unsigned int dev_idx);
protected:
unsigned short port_num;
bool server_online;
std::vector<RGBController *>& controllers;
std::vector<NetworkClientInfo *> ServerClients;
std::thread * ConnectionThread;
std::mutex ClientInfoChangeMutex;
std::vector<NetServerCallback> ClientInfoChangeCallbacks;
std::vector<void *> ClientInfoChangeCallbackArgs;
private:
#ifdef WIN32
WSADATA wsa;
#endif
SOCKET server_sock;
int accept_select(int sockfd, struct sockaddr *addr, socklen_t *addrlen);
int recv_select(SOCKET s, char *buf, int len, int flags);
};
+93 -92
View File
@@ -13,15 +13,13 @@
#include <stdlib.h>
#ifdef WIN32
#include <regex>
#include "i2c_smbus_piix4.h"
#include "i2c_smbus_i801.h"
#include "i2c_smbus_nct6775.h"
#include "i2c_smbus_nvapi.h"
#include "super_io.h"
#include "wmi.h"
#include "inpout32.h"
#pragma comment(lib, "inpout32.lib")
#else /* WIN32 */
#include "i2c_smbus_linux.h"
@@ -36,68 +34,6 @@ std::vector<i2c_smbus_interface*> busses;
std::vector<RGBController*> rgb_controllers;
#ifdef WIN32
/******************************************************************************************\
* *
* Nuvoton Super IO constants *
* *
\******************************************************************************************/
#define SIO_NCT5577_ID 0xC330 /* Device ID for NCT5577D (C333) */
#define SIO_NCT6102_ID 0x1060 /* Device ID for NCT6102D/6106D (1061) */
#define SIO_NCT6793_ID 0xd120 /* Device ID for NCT6793D (D121) */
#define SIO_NCT6796_ID 0xd420 /* Device ID for NCT6796D (D421) */
#define SIO_REG_LOGDEV 0x07 /* Logical Device Register */
#define SIO_REG_DEVID 0x20 /* Device ID Register */
#define SIO_REG_SMBA 0x62 /* SMBus Base Address Register */
#define SIO_LOGDEV_SMBUS 0x0B /* Logical Device for SMBus */
#define SIO_ID_MASK 0xFFF8 /* Device ID mask */
/******************************************************************************************\
* *
* superio_enter *
* *
* Put the Super IO chip into Extended Function Mode *
* *
\******************************************************************************************/
void superio_enter(int ioreg)
{
Out32(ioreg, 0x87);
Out32(ioreg, 0x87);
}
/******************************************************************************************\
* *
* superio_outb *
* *
* Write a byte to the Super IO configuration register *
* *
\******************************************************************************************/
void superio_outb(int ioreg, int reg, int val)
{
Out32(ioreg, reg);
Out32(ioreg + 1, val);
}
/******************************************************************************************\
* *
* superio_inb *
* *
* Read a byte to the Super IO configuration register *
* *
\******************************************************************************************/
int superio_inb(int ioreg, int reg)
{
Out32(ioreg, reg);
return Inp32(ioreg + 1);
}
/******************************************************************************************\
* *
* DetectNuvotonI2CBusses (Windows) *
@@ -121,6 +57,7 @@ void DetectNuvotonI2CBusses()
case SIO_NCT6102_ID:
case SIO_NCT6793_ID:
case SIO_NCT6796_ID:
case SIO_NCT6798_ID:
bus = new i2c_smbus_nct6775();
// Set logical device register to get SMBus base address
@@ -145,6 +82,9 @@ void DetectNuvotonI2CBusses()
case SIO_NCT6796_ID:
sprintf(bus->device_name, "Nuvoton NCT6796D SMBus at %X", smba);
break;
case SIO_NCT6798_ID:
sprintf(bus->device_name, "Nuvoton NCT6798D SMBus at %X", smba);
break;
}
busses.push_back(bus);
@@ -152,6 +92,33 @@ void DetectNuvotonI2CBusses()
} /* DetectNuvotonI2CBusses() */
/******************************************************************************************\
* *
* DetectNvAPII2CBusses (Windows) *
* *
* Detects available NVidia NvAPI I2C adapters and enumerates *
* i2c_smbus_interface objects for them. Only enumerates the first bus for each GPU *
* *
\******************************************************************************************/
void DetectNvAPII2CBusses()
{
static NV_PHYSICAL_GPU_HANDLE gpu_handles[64];
static NV_S32 gpu_count = 0;
NV_STATUS initialize = NvAPI_Initialize();
NvAPI_EnumPhysicalGPUs(gpu_handles, &gpu_count);
for(NV_S32 gpu_idx = 0; gpu_idx < gpu_count; gpu_idx++)
{
i2c_smbus_nvapi * nvapi_bus = new i2c_smbus_nvapi(gpu_handles[gpu_idx]);
sprintf(nvapi_bus->device_name, "NVidia NvAPI I2C on GPU %d", gpu_idx);
busses.push_back(nvapi_bus);
}
} /* DetectNvAPII2CBusses() */
/******************************************************************************************\
* *
@@ -235,6 +202,9 @@ void DetectI2CBusses()
// Detect Nuvoton Super IO SMBus adapters
DetectNuvotonI2CBusses();
// Detect NVidia NvAPI I2C adapters
DetectNvAPII2CBusses();
} /* DetectI2CBusses() */
#else /* WIN32 */
@@ -281,30 +251,24 @@ void DetectI2CBusses()
if(test_fd)
{
memset(device_string, 0x00, sizeof(device_string));
read(test_fd, device_string, sizeof(device_string));
device_string[strlen(device_string) - 1] = 0x00;
close(test_fd);
//ignore nvidia adapters for now
if(strncmp(device_string, "NVIDIA", 6) == 0)
{
ent = readdir(dir);
continue;
}
bus = new i2c_smbus_linux();
strcpy(bus->device_name, device_string);
strcpy(device_string, "/dev/");
strcat(device_string, ent->d_name);
test_fd = open(device_string, O_RDWR);
if (test_fd < 0)
{
delete bus;
ent = readdir(dir);
continue;
}
bus = new i2c_smbus_linux();
strcpy(bus->device_name, device_string);
bus->handle = test_fd;
busses.push_back(bus);
}
@@ -317,21 +281,38 @@ void DetectI2CBusses()
#endif /* WIN32 */
void DetectAuraControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectCorsairControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectCorsairProControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectHyperXControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectAuraSMBusControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectAuraGPUControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectCorsairVengeanceControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectCorsairVengeanceProControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectCrucialControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectHyperXDRAMControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectPatriotViperControllers(std::vector<i2c_smbus_interface*> &busses, std::vector<RGBController*> &rgb_controllers);
void DetectPolychromeControllers(std::vector<i2c_smbus_interface*>& busses, std::vector<RGBController*>& rgb_controllers);
void DetectRGBFusionControllers(std::vector<i2c_smbus_interface*>& busses, std::vector<RGBController*>& rgb_controllers);
void DetectRGBFusionGPUControllers(std::vector<i2c_smbus_interface*>& busses, std::vector<RGBController*>& rgb_controllers);
void DetectRGBFusion2SMBusControllers(std::vector<i2c_smbus_interface*>& busses, std::vector<RGBController*>& rgb_controllers);
void DetectMSIMysticLightControllers(std::vector<RGBController*> &rgb_controllers);
void DetectMSIRGBControllers(std::vector<RGBController*> &rgb_controllers);
void DetectAuraUSBControllers(std::vector<RGBController*> &rgb_controllers);
void DetectAuraCoreControllers(std::vector<RGBController*> &rgb_controllers);
void DetectLEDStripControllers(std::vector<RGBController*> &rgb_controllers);
void DetectHue2Controllers(std::vector<RGBController*> &rgb_controllers);
void DetectHuePlusControllers(std::vector<RGBController*> &rgb_controllers);
void DetectOpenRazerControllers(std::vector<RGBController*> &rgb_controllers);
void DetectRazerChromaSDKControllers(std::vector<RGBController*>& rgb_controllers);
void DetectE131Controllers(std::vector<RGBController*> &rgb_controllers);
void DetectAMDWraithPrismControllers(std::vector<RGBController*>& rgb_controllers);
void DetectAorusGPUControllers(std::vector<RGBController*> &rgb_controllers);
void DetectCoolerMasterControllers(std::vector<RGBController*>& rgb_controllers);
void DetectMSI3ZoneControllers(std::vector<RGBController*>& rgb_controllers);
void DetectPoseidonZRGBControllers(std::vector<RGBController*>& rgb_controllers);
void DetectCorsairPeripheralControllers(std::vector<RGBController*>& rgb_controllers);
void DetectCorsairLightingNodeControllers(std::vector<RGBController*> &rgb_controllers);
void DetectFaustusControllers(std::vector<RGBController*> &rgb_controllers);
void DetectHyperXKeyboardControllers(std::vector<RGBController*>& rgb_controllers);
void DetectThermaltakeRiingControllers(std::vector<RGBController*>& rgb_controllers);
void DetectRGBFusion2USBControllers(std::vector<RGBController*> &rgb_controllers);
void DetectRedragonControllers(std::vector<RGBController*>& rgb_controllers);
void DetectNZXTKrakenControllers(std::vector<RGBController*>& rgb_controllers);
/******************************************************************************************\
* *
@@ -345,34 +326,54 @@ void DetectRGBControllers(void)
{
DetectI2CBusses();
DetectAuraControllers(busses, rgb_controllers);
DetectCorsairControllers(busses, rgb_controllers);
DetectCorsairProControllers(busses, rgb_controllers);
DetectHyperXControllers(busses, rgb_controllers);
DetectAuraSMBusControllers(busses, rgb_controllers);
DetectAuraGPUControllers(busses, rgb_controllers);
DetectCorsairVengeanceControllers(busses, rgb_controllers);
DetectCorsairVengeanceProControllers(busses, rgb_controllers);
DetectCrucialControllers(busses, rgb_controllers);
DetectHyperXDRAMControllers(busses, rgb_controllers);
DetectPatriotViperControllers(busses, rgb_controllers);
DetectPolychromeControllers(busses, rgb_controllers);
DetectRGBFusionControllers(busses, rgb_controllers);
DetectRGBFusionGPUControllers(busses, rgb_controllers);
//TODO: Implement better detection before enabling this controller
//DetectRGBFusion2SMBusControllers(busses, rgb_controllers);
DetectRGBFusionControllers(busses, rgb_controllers);
DetectMSIMysticLightControllers(rgb_controllers);
DetectMSIRGBControllers(rgb_controllers);
DetectAuraUSBControllers(rgb_controllers);
DetectAuraCoreControllers(rgb_controllers);
DetectLEDStripControllers(rgb_controllers);
DetectHue2Controllers(rgb_controllers);
DetectHuePlusControllers(rgb_controllers);
DetectAMDWraithPrismControllers(rgb_controllers);
DetectCoolerMasterControllers(rgb_controllers);
DetectMSI3ZoneControllers(rgb_controllers);
DetectPoseidonZRGBControllers(rgb_controllers);
DetectHyperXKeyboardControllers(rgb_controllers);
DetectCorsairPeripheralControllers(rgb_controllers);
DetectCorsairLightingNodeControllers(rgb_controllers);
DetectThermaltakeRiingControllers(rgb_controllers);
DetectRGBFusion2USBControllers(rgb_controllers);
DetectRedragonControllers(rgb_controllers);
DetectNZXTKrakenControllers(rgb_controllers);
DetectE131Controllers(rgb_controllers);
DetectOpenRazerControllers(rgb_controllers);
/*-------------------------------------*\
| Windows-only devices |
\*-------------------------------------*/
#ifdef WIN32
DetectRazerChromaSDKControllers(rgb_controllers);
//DetectAorusGPUControllers(rgb_controllers);
/*-------------------------------------*\
| Linux-only devices |
\*-------------------------------------*/
#else
DetectOpenRazerControllers(rgb_controllers);
DetectFaustusControllers(rgb_controllers);
#endif
} /* DetectRGBControllers() */
+44 -14
View File
@@ -1,8 +1,8 @@
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 09367fc014c3..25c0e02b3344 100644
index 2ddca08f8a76..72647850f08e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -216,6 +216,15 @@ config I2C_CHT_WC
@@ -217,6 +217,15 @@ config I2C_CHT_WC
combined with a FUSB302 Type-C port-controller as such it is advised
to also select CONFIG_TYPEC_FUSB302=m.
@@ -19,7 +19,7 @@ index 09367fc014c3..25c0e02b3344 100644
tristate "Nvidia nForce2, nForce3 and nForce4"
depends on PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 80c23895eaaf..57a2daf0b94e 100644
index 25d60889713c..3c2a9b237ac6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_I2C_CHT_WC) += i2c-cht-wc.o
@@ -32,10 +32,10 @@ index 80c23895eaaf..57a2daf0b94e 100644
obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
diff --git a/drivers/i2c/busses/i2c-nct6775.c b/drivers/i2c/busses/i2c-nct6775.c
new file mode 100644
index 000000000000..e2b491a4b9f6
index 000000000000..0462f0952043
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nct6775.c
@@ -0,0 +1,617 @@
@@ -0,0 +1,647 @@
+/*
+ * i2c-nct6775 - Driver for the SMBus master functionality of
+ * Nuvoton NCT677x Super-I/O chips
@@ -71,6 +71,7 @@ index 000000000000..e2b491a4b9f6
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
@@ -115,6 +116,9 @@ index 000000000000..e2b491a4b9f6
+
+#define NCT6775_LD_SMBUS 0x0B
+
+/* Other settings */
+#define MAX_RETRIES 400
+
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
+ nct6795, nct6796, nct6798 };
+
@@ -237,10 +241,13 @@ index 000000000000..e2b491a4b9f6
+ struct i2c_nct6775_adapdata *adapdata = i2c_get_adapdata(adap);
+ unsigned short nuvoton_nct6793d_smba = adapdata->smba;
+ int i, len, cnt;
+ union i2c_smbus_data tmp_data;
+ int timeout = 0;
+
+ tmp_data.word = 0;
+ cnt = 0;
+ len = 0;
+
+
+ outb_p(NCT6793D_SOFT_RESET, SMBHSTCTL);
+
+ switch (size) {
@@ -248,13 +255,14 @@ index 000000000000..e2b491a4b9f6
+ outb_p((addr << 1) | read_write,
+ SMBHSTADD);
+ break;
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ tmp_data.byte = data->byte;
+ case I2C_SMBUS_BYTE:
+ outb_p((addr << 1) | read_write,
+ SMBHSTADD);
+ outb_p(command, SMBHSTIDX);
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->byte, SMBHSTDAT);
+ outb_p(tmp_data.byte, SMBHSTDAT);
+ outb_p(NCT6793D_WRITE_BYTE, SMBHSTCMD);
+ }
+ else {
@@ -268,7 +276,7 @@ index 000000000000..e2b491a4b9f6
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMBHSTDAT);
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT);
+ outb_p(NCT6793D_WRITE_WORD, SMBHSTCMD);
+ outb_p(NCT6793D_WRITE_WORD, SMBHSTCMD);
+ }
+ else {
+ outb_p(NCT6793D_READ_WORD, SMBHSTCMD);
@@ -316,7 +324,16 @@ index 000000000000..e2b491a4b9f6
+
+ while ((size == I2C_SMBUS_BLOCK_DATA) && (len > 0)) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ while ((inb_p(SMBHSTSTS) & NCT6793D_FIFO_EMPTY) == 0);
+ timeout = 0;
+ while ((inb_p(SMBHSTSTS) & NCT6793D_FIFO_EMPTY) == 0)
+ {
+ if(timeout > MAX_RETRIES)
+ {
+ return -ETIMEDOUT;
+ }
+ usleep_range(250, 500);
+ timeout++;
+ }
+
+ //Load more bytes into FIFO
+ if (len >= 4) {
@@ -335,10 +352,23 @@ index 000000000000..e2b491a4b9f6
+ len = 0;
+ }
+ }
+ else {
+ return -ENOTSUPP;
+ }
+
+ }
+
+ //wait for manual mode to complete
+ while ((inb_p(SMBHSTSTS) & NCT6793D_MANUAL_ACTIVE) != 0);
+ timeout = 0;
+ while ((inb_p(SMBHSTSTS) & NCT6793D_MANUAL_ACTIVE) != 0)
+ {
+ if(timeout > MAX_RETRIES)
+ {
+ return -ETIMEDOUT;
+ }
+ usleep_range(250, 500);
+ timeout++;
+ }
+
+ if ((inb_p(SMBHSTERR) & NCT6793D_NO_ACK) != 0) {
+ return -ENXIO;
@@ -654,10 +684,10 @@ index 000000000000..e2b491a4b9f6
+module_init(i2c_nct6775_init);
+module_exit(i2c_nct6775_exit);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index c46c4bddc7ca..8565d08178a2 100644
index 30ded6422e7b..e25ce84c26af 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -468,11 +468,11 @@ static int piix4_transaction(struct i2c_adapter *piix4_adapter)
@@ -467,11 +467,11 @@ static int piix4_transaction(struct i2c_adapter *piix4_adapter)
if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
usleep_range(2000, 2100);
else
@@ -671,7 +701,7 @@ index c46c4bddc7ca..8565d08178a2 100644
/* If the SMBus is still busy, we give up */
if (timeout == MAX_TIMEOUT) {
@@ -963,6 +963,11 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -981,6 +981,11 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
retval = piix4_setup_sb800(dev, id, 1);
}
+241 -44
View File
@@ -5,30 +5,73 @@ greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
TARGET = OpenRGB
TEMPLATE = app
VERSION = 0.2
win32:BUILDDATE = $$system(date /t)
unix:BUILDDATE = $$system(date -R)
GIT_COMMIT_ID = $$system(git --git-dir $$_PRO_FILE_PWD_/.git --work-tree $$_PRO_FILE_PWD_ rev-parse HEAD)
GIT_COMMIT_DATE = $$system(git --git-dir $$_PRO_FILE_PWD_/.git --work-tree $$_PRO_FILE_PWD_ show -s --format=%ci HEAD)
GIT_BRANCH = $$system(git --git-dir $$_PRO_FILE_PWD_/.git --work-tree $$_PRO_FILE_PWD_ rev-parse --abbrev-ref HEAD)
DEFINES += \
VERSION_STRING=\\"\"\"$$VERSION\\"\"\" \
BUILDDATE_STRING=\\"\"\"$$BUILDDATE\\"\"\" \
GIT_COMMIT_ID=\\"\"\"$$GIT_COMMIT_ID\\"\"\" \
GIT_COMMIT_DATE=\\"\"\"$$GIT_COMMIT_DATE\\"\"\" \
GIT_BRANCH=\\"\"\"$$GIT_BRANCH\\"\"\"
RC_ICONS = qt/OpenRGB.ico
INCLUDEPATH += \
dependencies/ColorWheel \
dependencies/hidapi \
dependencies/libe131/src/ \
i2c_smbus/ \
i2c_tools/ \
net_port/ \
serial_port/ \
super_io/ \
Controllers/AMDWraithPrismController/ \
Controllers/AuraController/ \
Controllers/CorsairController/ \
Controllers/CorsairProController/ \
Controllers/AuraUSBController/ \
Controllers/AuraCoreController/ \
Controllers/AuraGPUController/ \
Controllers/AuraSMBusController/ \
Controllers/CoolerMasterController/ \
Controllers/CorsairPeripheralController/ \
Controllers/CorsairLightingNodeController/ \
Controllers/CorsairVengeanceController/ \
Controllers/CorsairVengeanceProController/ \
Controllers/CrucialController/ \
Controllers/Hue2Controller/ \
Controllers/HuePlusController/ \
Controllers/HyperXController/ \
Controllers/HyperXDRAMController/ \
Controllers/HyperXKeyboardController/ \
Controllers/LEDStripController/ \
Controllers/MSI3ZoneController/ \
Controllers/MSIMysticLightController/ \
Controllers/MSIRGBController/ \
Controllers/NZXTKrakenController/ \
Controllers/PatriotViperController/ \
Controllers/PolychromeController/ \
Controllers/PoseidonZRGBController/ \
Controllers/RedragonController/ \
Controllers/RGBFusionController/ \
Controllers/RGBFusion2SMBusController/ \
Controllers/RGBFusion2USBController/ \
Controllers/RGBFusionGPUController/ \
Controllers/ThermaltakeRiingController/ \
RGBController/ \
qt/
SOURCES += \
dependencies/ColorWheel/ColorWheel.cpp \
dependencies/hidapi/hidapi.c \
dependencies/libe131/src/e131.c \
main.cpp \
cli.cpp \
OpenRGB.cpp \
NetworkClient.cpp \
NetworkServer.cpp \
ProfileManager.cpp \
qt/OpenRGBDeviceInfoPage.cpp \
qt/OpenRGBDevicePage.cpp \
qt/OpenRGBDialog.cpp \
@@ -36,47 +79,117 @@ SOURCES += \
i2c_tools/i2c_tools.cpp \
net_port/net_port.cpp \
qt/OpenRGBDialog2.cpp \
qt/OpenRGBProfileSaveDialog.cpp \
qt/OpenRGBServerInfoPage.cpp \
qt/OpenRGBSoftwareInfoPage.cpp \
qt/OpenRGBSystemInfoPage.cpp \
qt/OpenRGBZoneResizeDialog.cpp \
qt/hsv.cpp \
serial_port/serial_port.cpp \
super_io/super_io.cpp \
Controllers/AMDWraithPrismController/AMDWraithPrismController.cpp \
Controllers/AMDWraithPrismController/AMDWraithPrismControllerDetect.cpp \
Controllers/AuraController/AuraController.cpp \
Controllers/AuraController/AuraControllerDetect.cpp \
Controllers/CorsairController/CorsairController.cpp \
Controllers/CorsairController/CorsairControllerDetect.cpp \
Controllers/CorsairProController/CorsairProController.cpp \
Controllers/CorsairProController/CorsairProControllerDetect.cpp \
Controllers/AuraUSBController/AuraUSBController.cpp \
Controllers/AuraUSBController/AuraAddressableController.cpp \
Controllers/AuraUSBController/AuraMainboardController.cpp \
Controllers/AuraUSBController/AuraUSBControllerDetect.cpp \
Controllers/AuraCoreController/AuraCoreController.cpp \
Controllers/AuraCoreController/AuraCoreControllerDetect.cpp \
Controllers/AuraGPUController/AuraGPUController.cpp \
Controllers/AuraGPUController/AuraGPUControllerDetect.cpp \
Controllers/AuraSMBusController/AuraSMBusController.cpp \
Controllers/AuraSMBusController/AuraSMBusControllerDetect.cpp \
Controllers/CoolerMasterController/CMMP750Controller.cpp \
Controllers/CoolerMasterController/CoolerMasterControllerDetect.cpp \
Controllers/CorsairLightingNodeController/CorsairLightingNodeController.cpp \
Controllers/CorsairLightingNodeController/CorsairLightingNodeControllerDetect.cpp \
Controllers/CorsairPeripheralController/CorsairPeripheralController.cpp \
Controllers/CorsairPeripheralController/CorsairPeripheralControllerDetect.cpp \
Controllers/CorsairVengeanceController/CorsairVengeanceController.cpp \
Controllers/CorsairVengeanceController/CorsairVengeanceControllerDetect.cpp \
Controllers/CorsairVengeanceProController/CorsairVengeanceProController.cpp \
Controllers/CorsairVengeanceProController/CorsairVengeanceProControllerDetect.cpp \
Controllers/CrucialController/CrucialController.cpp \
Controllers/CrucialController/CrucialControllerDetect.cpp \
Controllers/Hue2Controller/Hue2Controller.cpp \
Controllers/Hue2Controller/Hue2ControllerDetect.cpp \
Controllers/HuePlusController/HuePlusController.cpp \
Controllers/HuePlusController/HuePlusControllerDetect.cpp \
Controllers/HyperXController/HyperXController.cpp \
Controllers/HyperXController/HyperXControllerDetect.cpp \
Controllers/HyperXDRAMController/HyperXDRAMController.cpp \
Controllers/HyperXDRAMController/HyperXDRAMControllerDetect.cpp \
Controllers/HyperXKeyboardController/HyperXKeyboardController.cpp \
Controllers/HyperXKeyboardController/HyperXKeyboardControllerDetect.cpp \
Controllers/LEDStripController/LEDStripController.cpp \
Controllers/LEDStripController/LEDStripControllerDetect.cpp \
Controllers/MSI3ZoneController/MSI3ZoneController.cpp \
Controllers/MSI3ZoneController/MSI3ZoneControllerDetect.cpp \
Controllers/MSIMysticLightController/MSIMysticLightController.cpp \
Controllers/MSIMysticLightController/MSIMysticLightControllerDetect.cpp \
Controllers/MSIRGBController/MSIRGBController.cpp \
Controllers/MSIRGBController/MSIRGBControllerDetect.cpp \
Controllers/NZXTKrakenController/NZXTKrakenController.cpp \
Controllers/NZXTKrakenController/NZXTKrakenControllerDetect.cpp \
Controllers/PatriotViperController/PatriotViperController.cpp \
Controllers/PatriotViperController/PatriotViperControllerDetect.cpp \
Controllers/PolychromeController/PolychromeController.cpp \
Controllers/PolychromeController/PolychromeControllerDetect.cpp \
Controllers/PoseidonZRGBController/PoseidonZRGBController.cpp \
Controllers/PoseidonZRGBController/PoseidonZRGBControllerDetect.cpp \
Controllers/RGBFusionController/RGBFusionController.cpp \
Controllers/RGBFusionController/RGBFusionControllerDetect.cpp \
Controllers/RGBFusion2USBController/RGBFusion2USBController.cpp \
Controllers/RGBFusion2USBController/RGBFusion2USBControllerDetect.cpp \
Controllers/RGBFusion2SMBusController/RGBFusion2SMBusController.cpp \
Controllers/RGBFusion2SMBusController/RGBFusion2SMBusControllerDetect.cpp \
Controllers/RGBFusionGPUController/RGBFusionGPUController.cpp \
Controllers/RGBFusionGPUController/RGBFusionGPUControllerDetect.cpp \
Controllers/RedragonController/RedragonK556Controller.cpp \
Controllers/RedragonController/RedragonM711Controller.cpp \
Controllers/RedragonController/RedragonControllerDetect.cpp \
Controllers/ThermaltakeRiingController/ThermaltakeRiingController.cpp \
Controllers/ThermaltakeRiingController/ThermaltakeRiingControllerDetect.cpp \
RGBController/RGBController.cpp \
RGBController/E131ControllerDetect.cpp \
RGBController/RGBController_AMDWraithPrism.cpp \
RGBController/RGBController_Aura.cpp \
RGBController/RGBController_Corsair.cpp \
RGBController/RGBController_CorsairPro.cpp \
RGBController/RGBController_AuraUSB.cpp \
RGBController/RGBController_AuraCore.cpp \
RGBController/RGBController_AuraGPU.cpp \
RGBController/RGBController_AuraSMBus.cpp \
RGBController/RGBController_CMMP750Controller.cpp \
RGBController/RGBController_CorsairLightingNode.cpp \
RGBController/RGBController_CorsairPeripheral.cpp \
RGBController/RGBController_CorsairVengeance.cpp \
RGBController/RGBController_CorsairVengeancePro.cpp \
RGBController/RGBController_Crucial.cpp \
RGBController/RGBController_Dummy.cpp \
RGBController/RGBController_Hue2.cpp \
RGBController/RGBController_HuePlus.cpp \
RGBController/RGBController_HyperX.cpp \
RGBController/RGBController_HyperXDRAM.cpp \
RGBController/RGBController_HyperXKeyboard.cpp \
RGBController/RGBController_E131.cpp \
RGBController/RGBController_LEDStrip.cpp \
RGBController/RGBController_MSI3Zone.cpp \
RGBController/RGBController_MSIMysticLight.cpp \
RGBController/RGBController_MSIRGB.cpp \
RGBController/RGBController_Network.cpp \
RGBController/RGBController_NZXTKraken.cpp \
RGBController/RGBController_PatriotViper.cpp \
RGBController/RGBController_Polychrome.cpp \
RGBController/RGBController_RGBFusion.cpp
RGBController/RGBController_PoseidonZRGB.cpp \
RGBController/RGBController_RedragonK556.cpp \
RGBController/RGBController_RedragonM711.cpp \
RGBController/RGBController_RGBFusion.cpp \
RGBController/RGBController_RGBFusion2SMBus.cpp \
RGBController/RGBController_RGBFusion2USB.cpp \
RGBController/RGBController_RGBFusionGPU.cpp \
RGBController/RGBController_ThermaltakeRiing.cpp \
HEADERS += \
Controllers/RGBFusionController/RGBFusionController.h \
dependencies/ColorWheel/ColorWheel.h \
NetworkClient.h \
NetworkProtocol.h \
NetworkServer.h \
ProfileManager.h \
qt/OpenRGBDeviceInfoPage.h \
qt/OpenRGBDevicePage.h \
qt/OpenRGBDialog.h \
@@ -84,74 +197,137 @@ HEADERS += \
i2c_tools/i2c_tools.h \
net_port/net_port.h \
qt/OpenRGBDialog2.h \
qt/OpenRGBProfileSaveDialog.h \
qt/OpenRGBServerInfoPage.h \
qt/OpenRGBSoftwareInfoPage.h \
qt/OpenRGBSystemInfoPage.h \
qt/OpenRGBZoneResizeDialog.h \
serial_port/find_usb_serial_port.h \
serial_port/serial_port.h \
super_io/super_io.h \
Controllers/AMDWraithPrismController/AMDWraithPrismController.h \
Controllers/AuraController/AuraController.h \
Controllers/CorsairController/CorsairController.h \
Controllers/CorsairProController/CorsairProController.h \
Controllers/AuraUSBController/AuraUSBController.h \
Controllers/AuraUSBController/AuraAddressableController.h \
Controllers/AuraUSBController/AuraMainboardController.h \
Controllers/AuraCoreController/AuraCoreController.h \
Controllers/AuraGPUController/AuraGPUController.h \
Controllers/AuraSMBusController/AuraSMBusController.h \
Controllers/CoolerMasterController/CMMP750Controller.h \
Controllers/CorsairLightingNodeController/CorsairLightingNodeController.h \
Controllers/CorsairPeripheralController/CorsairPeripheralController.h \
Controllers/CorsairVengeanceController/CorsairVengeanceController.h \
Controllers/CorsairVengeanceProController/CorsairVengeanceProController.h \
Controllers/CrucialController/CrucialController.h \
Controllers/Hue2Controller/Hue2Controller.h \
Controllers/HuePlusController/HuePlusController.h \
Controllers/HyperXController/HyperXController.h \
Controllers/HyperXDRAMController/HyperXDRAMController.h \
Controllers/HyperXKeyboardController/HyperXKeyboardController.h \
Controllers/LEDStripController/LEDStripController.h \
Controllers/MSI3ZoneController/MSI3ZoneController.h \
Controllers/MSIMysticLightController/MSIMysticLightController.h \
Controllers/MSIRGBController/MSIRGBController.h \
Controllers/PatriotViperController/PatriotViperController.h \
Controllers/PolychromeController/PolychromeController.h \
Controllers/PoseidonZRGBController/PoseidonZRGBController.h \
Controllers/RGBFusionController/RGBFusionController.h \
Controllers/RGBFusion2USBController/RGBFusion2USBController.h \
Controllers/RGBFusion2SMBusController/RGBFusion2SMBusController.h \
Controllers/RGBFusionGPUController/RGBFusionGPUController.h \
Controllers/RedragonController/RedragonK556Controller.h \
Controllers/RedragonController/RedragonM711Controller.h \
Controllers/ThermaltakeRiingController/ThermaltakeRiingController.h \
RGBController/RGBController.h \
RGBController/RGBController_AMDWraithPrism.h \
RGBController/RGBController_Aura.h \
RGBController/RGBController_Corsair.h \
RGBController/RGBController_CorsairPro.h \
RGBController/RGBController_AuraUSB.h \
RGBController/RGBController_AuraCore.h \
RGBController/RGBController_AuraGPU.h \
RGBController/RGBController_AuraSMBus.h \
RGBController/RGBController_CMMP750Controller.h \
RGBController/RGBController_CorsairLightingNode.h \
RGBController/RGBController_CorsairPeripheral.h \
RGBController/RGBController_CorsairVengeance.h \
RGBController/RGBController_CorsairVengeancePro.h \
RGBController/RGBController_Crucial.h \
RGBController/RGBController_Dummy.h \
RGBController/RGBController_E131.h \
RGBController/RGBController_Hue2.h \
RGBController/RGBController_HuePlus.h \
RGBController/RGBController_HyperX.h \
RGBController/RGBController_HyperXDRAM.h \
RGBController/RGBController_HyperXKeyboard.h \
RGBController/RGBController_LEDStrip.h \
RGBController/RGBController_MSI3Zone.h \
RGBController/RGBController_MSIMysticLight.h \
RGBController/RGBController_MSIRGB.h \
RGBController/RGBController_Network.h \
RGBController/RGBController_PatriotViper.h \
RGBController/RGBController_Polychrome.h \
RGBController/RGBController_RGBFusion.h
RGBController/RGBController_PoseidonZRGB.h \
RGBController/RGBController_RedragonK556.h \
RGBController/RGBController_RedragonM711.h \
RGBController/RGBController_RGBFusion.h \
RGBController/RGBController_RGBFusion2SMBus.h \
RGBController/RGBController_RGBFusion2USB.h \
RGBController/RGBController_RGBFusionGPU.h \
RGBController/RGBController_ThermaltakeRiing.h \
RESOURCES += \
qt/resources.qrc
FORMS += \
qt/OpenRGBDeviceInfoPage.ui \
qt/OpenRGBDevicePage.ui \
qt/OpenRGBDialog.ui \
qt/OpenRGBDialog2.ui \
qt/OpenRGBSystemInfoPage.ui
qt/OpenRGBDeviceInfoPage.ui \
qt/OpenRGBDevicePage.ui \
qt/OpenRGBDialog.ui \
qt/OpenRGBDialog2.ui \
qt/OpenRGBProfileSaveDialog.ui \
qt/OpenRGBServerInfoPage.ui \
qt/OpenRGBSoftwareInfoPage.ui \
qt/OpenRGBSystemInfoPage.ui \
qt/OpenRGBZoneResizeDialog.ui \
#-----------------------------------------------
# Windows specific project configuration
#-----------------------------------------------
win32:INCLUDEPATH += \
dependencies/inpout32_1501/Win32/ \
dependencies/razer-chroma-2.9.0/inc \
dependencies/libusb-1.0.22/include \
dependencies/NVFC \
dependencies/openrazer-win32 \
wmi/ \
win32:SOURCES += \
dependencies/NVFC/nvapi.cpp \
i2c_smbus/i2c_smbus_i801.cpp \
i2c_smbus/i2c_smbus_nct6775.cpp \
i2c_smbus/i2c_smbus_nvapi.cpp \
i2c_smbus/i2c_smbus_piix4.cpp \
serial_port/find_usb_serial_port_win.cpp \
wmi/wmi.cpp \
RGBController/AorusGPUDetect.cpp \
RGBController/RGBController_AorusGPU.cpp \
RGBController/RazerChromaSDKDetect.cpp \
RGBController/RGBController_RazerChromaSDK.cpp \
RGBController/OpenRazerWindowsDetect.cpp \
RGBController/RGBController_OpenRazerWindows.cpp \
win32:HEADERS += \
dependencies/inpout32_1501/Win32/inpout32.h \
dependencies/NVFC/nvapi.h \
i2c_smbus/i2c_smbus_i801.h \
i2c_smbus/i2c_smbus_nct6775.h \
i2c_smbus/i2c_smbus_nvapi.h \
i2c_smbus/i2c_smbus_piix4.h \
wmi/wmi.h \
RGBController/RGBController_AorusGPU.h \
RGBController/RGBController_RazerChromaSDK.h \
RGBController/RGBController_OpenRazerWindows.h \
win32:LIBS += \
-lws2_32 \
-L"$$PWD/dependencies/inpout32_1501/Win32/" -linpout32 \
-L"$$PWD/dependencies/libusb-1.0.22/MS32/dll" -llibusb-1.0
win32:contains(QMAKE_TARGET.arch, x86_64) {
LIBS += \
-lws2_32 \
-L"$$PWD/dependencies/inpout32_1501/x64/" -linpoutx64 \
-L"$$PWD/dependencies/libusb-1.0.22/MS64/dll" -llibusb-1.0 \
}
win32:contains(QMAKE_TARGET.arch, x86) {
LIBS += \
-lws2_32 \
-L"$$PWD/dependencies/inpout32_1501/Win32/" -linpout32 \
-L"$$PWD/dependencies/libusb-1.0.22/MS32/dll" -llibusb-1.0 \
}
win32:DEFINES -= \
UNICODE
@@ -163,6 +339,23 @@ win32:DEFINES += \
_WINSOCK_DEPRECATED_NO_WARNINGS \
WIN32_LEAN_AND_MEAN
# Copy OpenRazer.dll to output directory
win32:contains(QMAKE_TARGET.arch, x86_64) {
copydata.commands = $(COPY_FILE) \"$$shell_path($$PWD\\dependencies\\openrazer-win32\\OpenRazer64.dll)\" \"$$shell_path($$OUT_PWD)\"
first.depends = $(first) copydata
export(first.depends)
export(copydata.commands)
QMAKE_EXTRA_TARGETS += first copydata
}
win32:contains(QMAKE_TARGET.arch, x86) {
copydata.commands = $(COPY_FILE) \"$$shell_path($$PWD\\dependencies\\openrazer-win32\\OpenRazer.dll)\" \"$$shell_path($$OUT_PWD)\"
first.depends = $(first) copydata
export(first.depends)
export(copydata.commands)
QMAKE_EXTRA_TARGETS += first copydata
}
#-----------------------------------------------
# Linux specific project configuration
#-----------------------------------------------
@@ -170,11 +363,15 @@ unix:INCLUDEPATH += \
unix:HEADERS += \
i2c_smbus/i2c_smbus_linux.h \
RGBController/RGBController_Faustus.h \
unix:LIBS += \
-lusb-1.0
-lusb-1.0 \
-lstdc++fs \
unix:SOURCES += \
i2c_smbus/i2c_smbus_linux.cpp \
serial_port/find_usb_serial_port_linux.cpp \
RGBController/OpenRazerDetect.cpp \
RGBController/RGBController_Faustus.cpp \
RGBController/RGBController_OpenRazer.cpp \
+300
View File
@@ -0,0 +1,300 @@
#include "ProfileManager.h"
#include "RGBController_Dummy.h"
#define _SILENCE_EXPERIMENTAL_FILESYSTEM_DEPRECATION_WARNING
#include <experimental/filesystem>
#include <fstream>
#include <iostream>
#include <cstring>
namespace fs = std::experimental::filesystem;
ProfileManager::ProfileManager(std::vector<RGBController *>& control) : controllers(control)
{
UpdateProfileList();
}
ProfileManager::~ProfileManager()
{
}
bool ProfileManager::SaveProfile(std::string profile_name)
{
/*---------------------------------------------------------*\
| If a name was entered, save the profile file |
\*---------------------------------------------------------*/
if(profile_name != "")
{
/*---------------------------------------------------------*\
| Open an output file in binary mode |
\*---------------------------------------------------------*/
std::ofstream controller_file(profile_name, std::ios::out | std::ios::binary);
/*---------------------------------------------------------*\
| Write header |
| 16 bytes - "OPENRGB_PROFILE" |
| 4 bytes - Version, unsigned int |
\*---------------------------------------------------------*/
unsigned int profile_version = 1;
controller_file.write("OPENRGB_PROFILE", 16);
controller_file.write((char *)&profile_version, sizeof(unsigned int));
/*---------------------------------------------------------*\
| Write controller data for each controller |
\*---------------------------------------------------------*/
for(std::size_t controller_index = 0; controller_index < controllers.size(); controller_index++)
{
unsigned char *controller_data = controllers[controller_index]->GetDeviceDescription();
unsigned int controller_size;
memcpy(&controller_size, controller_data, sizeof(controller_size));
controller_file.write((const char *)controller_data, controller_size);
}
/*---------------------------------------------------------*\
| Close the file when done |
\*---------------------------------------------------------*/
controller_file.close();
/*---------------------------------------------------------*\
| Update the profile list |
\*---------------------------------------------------------*/
UpdateProfileList();
return(true);
}
else
{
return(false);
}
}
bool ProfileManager::LoadProfile(std::string profile_name)
{
return(LoadProfileWithOptions(profile_name, false, true));
}
bool ProfileManager::LoadSizeFromProfile(std::string profile_name)
{
return(LoadProfileWithOptions(profile_name, true, false));
}
bool ProfileManager::LoadProfileWithOptions
(
std::string profile_name,
bool load_size,
bool load_settings
)
{
std::vector<RGBController*> temp_controllers;
std::vector<bool> temp_controller_used;
unsigned int controller_size;
unsigned int controller_offset = 0;
bool ret_val = false;
std::string filename = profile_name;
/*---------------------------------------------------------*\
| Open input file in binary mode |
\*---------------------------------------------------------*/
std::ifstream controller_file(filename, std::ios::in | std::ios::binary);
/*---------------------------------------------------------*\
| Read and verify file header |
\*---------------------------------------------------------*/
char header_string[16];
unsigned int header_version;
controller_file.read(header_string, 16);
controller_file.read((char *)&header_version, sizeof(unsigned int));
controller_offset += 16 + sizeof(unsigned int);
controller_file.seekg(controller_offset);
if(strcmp(header_string, "OPENRGB_PROFILE") == 0)
{
if(header_version == 1)
{
/*---------------------------------------------------------*\
| Read controller data from file until EOF |
\*---------------------------------------------------------*/
while(!(controller_file.peek() == EOF))
{
controller_file.read((char *)&controller_size, sizeof(controller_size));
unsigned char *controller_data = new unsigned char[controller_size];
controller_file.seekg(controller_offset);
controller_file.read((char *)controller_data, controller_size);
RGBController_Dummy *temp_controller = new RGBController_Dummy();
temp_controller->ReadDeviceDescription(controller_data);
temp_controllers.push_back(temp_controller);
temp_controller_used.push_back(false);
delete[] controller_data;
controller_offset += controller_size;
controller_file.seekg(controller_offset);
ret_val = true;
}
/*---------------------------------------------------------*\
| Loop through all controllers. For each controller, search|
| all saved controllers until a match is found |
\*---------------------------------------------------------*/
for(std::size_t controller_index = 0; controller_index < controllers.size(); controller_index++)
{
RGBController *controller_ptr = controllers[controller_index];
for(std::size_t temp_index = 0; temp_index < temp_controllers.size(); temp_index++)
{
RGBController *temp_controller = temp_controllers[temp_index];
/*---------------------------------------------------------*\
| Test if saved controller data matches this controller |
\*---------------------------------------------------------*/
if((temp_controller_used[temp_index] == false )
&&(temp_controller->type == controller_ptr->type )
&&(temp_controller->name == controller_ptr->name )
&&(temp_controller->description == controller_ptr->description)
&&(temp_controller->version == controller_ptr->version )
&&(temp_controller->serial == controller_ptr->serial )
&&(temp_controller->location == controller_ptr->location ))
{
/*---------------------------------------------------------*\
| Update zone sizes if requested |
\*---------------------------------------------------------*/
if(load_size)
{
if(temp_controller->zones.size() == controller_ptr->zones.size())
{
for(std::size_t zone_idx = 0; zone_idx < temp_controller->zones.size(); zone_idx++)
{
if((temp_controller->zones[zone_idx].name == controller_ptr->zones[zone_idx].name )
&&(temp_controller->zones[zone_idx].type == controller_ptr->zones[zone_idx].type )
&&(temp_controller->zones[zone_idx].leds_min == controller_ptr->zones[zone_idx].leds_min )
&&(temp_controller->zones[zone_idx].leds_max == controller_ptr->zones[zone_idx].leds_max )
&&(temp_controller->zones[zone_idx].leds_count != controller_ptr->zones[zone_idx].leds_count))
{
controller_ptr->ResizeZone(zone_idx, temp_controller->zones[zone_idx].leds_count);
}
}
}
}
/*---------------------------------------------------------*\
| Update settings if requested |
\*---------------------------------------------------------*/
if(load_settings)
{
/*---------------------------------------------------------*\
| Update all modes |
\*---------------------------------------------------------*/
if(temp_controller->modes.size() == controller_ptr->modes.size())
{
for(std::size_t mode_index = 0; mode_index < temp_controller->modes.size(); mode_index++)
{
if((temp_controller->modes[mode_index].name == controller_ptr->modes[mode_index].name )
&&(temp_controller->modes[mode_index].value == controller_ptr->modes[mode_index].value )
&&(temp_controller->modes[mode_index].flags == controller_ptr->modes[mode_index].flags )
&&(temp_controller->modes[mode_index].speed_min == controller_ptr->modes[mode_index].speed_min )
&&(temp_controller->modes[mode_index].speed_max == controller_ptr->modes[mode_index].speed_max )
&&(temp_controller->modes[mode_index].colors_min == controller_ptr->modes[mode_index].colors_min)
&&(temp_controller->modes[mode_index].colors_max == controller_ptr->modes[mode_index].colors_max))
{
controller_ptr->modes[mode_index].speed = temp_controller->modes[mode_index].speed;
controller_ptr->modes[mode_index].direction = temp_controller->modes[mode_index].direction;
controller_ptr->modes[mode_index].color_mode = temp_controller->modes[mode_index].color_mode;
controller_ptr->modes[mode_index].colors.resize(temp_controller->modes[mode_index].colors.size());
for(std::size_t mode_color_index = 0; mode_color_index < temp_controller->modes[mode_index].colors.size(); mode_color_index++)
{
controller_ptr->modes[mode_index].colors[mode_color_index] = temp_controller->modes[mode_index].colors[mode_color_index];
}
}
}
controller_ptr->active_mode = temp_controller->active_mode;
}
/*---------------------------------------------------------*\
| Update all colors |
\*---------------------------------------------------------*/
if(temp_controller->colors.size() == controller_ptr->colors.size())
{
for(std::size_t color_index = 0; color_index < temp_controller->colors.size(); color_index++)
{
controller_ptr->colors[color_index] = temp_controller->colors[color_index];
}
}
temp_controller_used[temp_index] = true;
break;
}
}
}
}
}
}
return(ret_val);
}
void ProfileManager::DeleteProfile(std::string profile_name)
{
remove(profile_name.c_str());
UpdateProfileList();
}
void ProfileManager::UpdateProfileList()
{
profile_list.clear();
/*---------------------------------------------------------*\
| Load profiles by looking for .orp files in current dir |
\*---------------------------------------------------------*/
for(const auto & entry : fs::directory_iterator("."))
{
std::string filename = entry.path().filename().string();
if(filename.find(".orp") != std::string::npos)
{
/*---------------------------------------------------------*\
| Open input file in binary mode |
\*---------------------------------------------------------*/
std::ifstream profile_file(filename, std::ios::in | std::ios::binary);
/*---------------------------------------------------------*\
| Read and verify file header |
\*---------------------------------------------------------*/
char header_string[16];
unsigned int header_version;
profile_file.read(header_string, 16);
profile_file.read((char *)&header_version, sizeof(unsigned int));
if(strcmp(header_string, "OPENRGB_PROFILE") == 0)
{
if(header_version == 1)
{
/*---------------------------------------------------------*\
| Add this profile to the list |
\*---------------------------------------------------------*/
profile_list.push_back(filename);
}
}
profile_file.close();
}
}
}

Some files were not shown because too many files have changed in this diff Show More